Latest cable end box Tenders | Government cable end box Tenders

CTN :45671855

06 Jul, 2026 68.00 Lacs

Rupnagar - Punjab

Tender For rate contract for repair of various cards of puncom make equipment installed in rvpn at works of m/s puncom for the year 2026-27 - channel modem card, power amplifier, vf interface card, power supply card, trans filter, hf hybrid card, data interface card, receive filter, supervisory card , mtu, smr module, minicsu-2 controller (display unit), eam card(e&m)

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45591042

27 Jun, 2026 NA

Nainital - Uttarakhand

Tender For supply of sluice valve 200mm pn1 point 6 isi marked , sluice valve 150mm pn 1 point 6 isi marked , pump starter 12 point 5 hp delta isi marked , ht tape 3m 19mmx9mtr , ht tape 3m 25mm x 10mtr roll , non return valve 150mm isi marked , led garden light 10w , sluice valve 100mm pn 1 point 6 isi marked , led bulb 7 watts , cable copper pvc frlsh 2 point 5 sqmm multistranded single core , sluice valve 80mm pn 1 point 6 isi marked , sensor based led tube light batten 20w , heating element 1500 watt triangular type , non return valve 100mm isi marked , heating element 2000 watt triangular type , ht cable end box outdoor 3 c x 95 sqmm 11 kv e , led driver for 2 feet x 2feet false ceiling light fitting , ht cable end box indoor 3 c x 95 sqmm 11 kv e , heat strinks joint kit indoor 3c x 95 sqmm , cable copper frlsh pvc 1 point 5 sqmm multi stranded single core , submursible cu cable 16 sqmm x3core isi marked , submursible cu cable 25 sqmm x3core isi marked , sheet metal enclosure with plug top and mcb sp 20a , pvc flexible cable frlsh 0 point 5 sqm three core , pvc flexible cable 23 oblique 00076 twin core , led tube rod 20w essential 1200mm 2100 lm , thermostat for geyser 25 ltr , led electronic driver 150 w , led electronic driver 100 w , fan regulator switch type , mcb 63 amp 4 pole isolator , pvc flexible cable frlsh 1 point 5 sqm three core isi marked , mcb 40 amp 4 pole isolator , cable copper frlsh 1sqmm single core isi marked , mcb 32 amp 4 pole isolator , led electronic driver 45 w isi mrked , thermostat for geyser 50 ltr isi marked , 20amp plug and socket distribution board , modular socket with mcb sp 25a , regulator electronic for ceiling fan modular type , fan regulator dimmer 400 oblique 450w , switch socket combination 6a , led driver 90w , led electronic driver 72 w , mcb sp 06 amp 230 volts 10 ka , led tube light fitting 20 w alum extruded decorative box with driver and tubelight , led bulb 9 w 230 volt with electric backup battery , led tube light fitting 18 w alum extruded decorative box with driver and tubelight //bid details 2 / 136

CTN :45561031

30 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For supply, erection, testing and commissioning of 6 kw 3 phase station lighting control panel (63a) with all necessary accessories to complete the work in all respect (2 nos 63a tp contactor, ac supply operation. 1 no. 63a mccb fp, 2 nos. 40a mcb fp, 1no. ,6a sp mcb 02 nos 24 hr.digital display time switch,2 nos.timer 0-60 min range, suitable capacity connector and 1 no. emergency switch, led light indication module for 30% &70% circuit for individual pf at the smr room, necessary wiring as well as push button typeswitch board etc.with suitable capacity copper wire by casing capping etc.) for auto and manual operation. [ warranty period: 30 months after the date of delivery ] ]

CTN :45549158

09 Jul, 2026 NA

Kharagpur - West Bengal

Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, on load type tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is tobe provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. bee star rating:- 3 or above (firm shall submit a valid bee certificate for the offered product with desired bee star rating). [ warranty period: 30 months after the date of delivery ] ]

CTN :45479514

25 Jun, 2026 NA

Kharagpur - West Bengal

Tender For distribution transformer of rating 250 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer: off-load tap changer for variation of hv voltage from +5% to -10% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest withcondition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. suitable cable-end box along with cable entry hole glands is to be provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is: 1180 (part 1) latest. detailed specification attached as annexure a. [ warranty period: 30 months after the date of delivery ]]

CTN :45177456

18 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - nuppl railway siding; servicing/repairing of smr module (110v/20a) and dc-dc converter (24-32v/5a), and supply of dc-dc converter (24-32v/5a) for integrated power supply..

CTN :45470987

29 Jun, 2026 NA

Jamshedpur - Jharkhand

Tender For supply & testing of 500 kva, 11kv/750v, 3-phase, 50 hz. outdoor type power transformer conforming to 15 2026 (part 1): 2011 (reaffirmed 2021), plinth mounted, copper wound, mineral oil immersed with freely breathing system (also called conservator system) as per clause 8.2 (a) of is 2026 (part 1), primary winding in delta and secondary winding in star (vector symbol-dyn11), onan cooled transformer, minimum short circuit impedance of 5% as per is 2026 (part 5), with all fittings specified in annexure a to this description, terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4) nos.) shall conform to 15.7421. suitable cable-end box is to be provided as follows: a) for outdoor type: l.t. side tap changer: on-load tap changerfor variation of hv voltage from -+5% to -5% in steps of 1.25% make- andrew yule/aeg/crompton greaves/kirloskar electric co./abb/siemens/schneider or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45431484

22 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - condemned released, unserviceable, codai/workable life completed, battery charger assorted, 5 watt vhf charger all type, smps charger/ 25 watt vhf set charger (12v/10amp), isolation transformer (cvt), smr module. total qty = 2181 nos. total weight= 2.747 mts ( fe = 2.402 mts, copper= 0.0621 mts, plastic/non-ferrous = 0.283 mts.) for custodian information ss-11 sse/t/jbp/2025/1 date 08/08/2025, ds-8 note no.- 045211 date 25/07/2025. mode of delivery by actual weight only. (remark- sale condition "as is where is basis" uniform sale condition for e-auction is applicable.)

CTN :45400889

15 Jun, 2026 NA

Malda - West Bengal

Tender For auction sale of others - 1 m/free battery 12 volt, 75 ah 46 nos 2 m/free battery 12 volt,120 ah 04 nos 3 m/free battery 12 volt,120 ah 02 nos 4 m/free battery 12 volt,88 ah 01 no 5 m/free battery 12 volt,200ah 02 nos 6 m/free battery 2v/300 ah. 102 nos 7 m/free battery 12v/7ah 78 nos 8 m/free battery 12 volt, 65 ah 01 no 9 m/free battery 12 volt, 100 ah 05 nos 10 m/free battery 2v/120 ah. 12 nos 11 m/free battery 2v/120 ah. 24 nos. 12 m/free battery 12v/130 ah. 05 nos 13 power supply unit for telecom installation at way station 12v/24v dc 39 nos 14 4 wire control telephone. 137 nos 15 electronic push button auto tele phone. 267 nos 16 4 wire universal control tele phone. 04 nos 17 digital multi key telephone. 09 nos 18 2 wire way station control telephone 16 nos 19 gsm/wll phone. 04 nos 20 2 lines cord less telephone. 04 nos 21 magneto telephone. 95 nos 22 power supply unit (psu) for 25 watt vhf 18 nos 23 charger adopter for kenwood walkie talkie 37 nos 24 charger base for kenwood walkie talkie 39 nos 25 charger adaptor for hyt walkie 18 nos 26 charger adopter for hyt walkie talkie 07 nos 27 charger base for hyt walkie talkie 34 nos 28 gate tele phone master. epsilon 07 nos 29 gate tele phone slave epsilon 14 nos 30 gate tele phone slave bentron 07 nos 31 4/2 wire dtmf hq control office equipment 11 nos 32 control console for rail gate announcement 07 nos 33 charger adopter for vertex walkie talkie 23 nos 34 charger base for vertex walkie 22 nos 35 charger for icom walkie talkie. 01 no 36 charger for tid walkie talkie 05 nos 37 charger for uniden walkie talkie 22 nos 38 charger for sanchar walkie talkie 15 nos 39 battery for 5 watt vertex walkie talkie 26 nos 40 battery for 5 watt tid walkie talkie 03 nos 41 battery for 5 watt kenwood walkie talkie 67 nos 42 battery for 5 watt uniden walkie talkie 23 nos 43 battery for 5 watt hyt walkie talkie 51 nos 44 battery for 5 watt sanchar walkie talkie 60 nos 45 5 watt walkie talkie make: vertex 95 nos 46 5 watt walkie talkie make: kenwood 55 nos 47 5 watt walkie talkie make: rexon 01 no 48 5 watt walkie talkie make: motorolla - gp-328 72 nos 49 5 watt walkie talkie make: icom 01 no 50 5 watt walkie talkie make: hyt 37 nos 51 5 watt walkie talkie make: motorolla - gp-68 03 nos 52 5 watt walkie talkie make: tid 17 nos 53 5 watt walkie talkie make: motorolla - gp-300 06 nos 54 5 watt walkie talkie make: uniden 25 nos 55 5 watt walkie talkie make: sanchar 11 nos 56 pa amplifier, ahuja, br 250 01 no 57 pa amplifier, ahuja, tza 4000 02 nos 58 pa amplifier, unisound, upa-750 01 no 59 pa amplifier, ahuja ssb 60 01 no 60 pa column speaker 40 watt 16 nos 70 pa column speaker 20 watt 03 nos 71 smr module 48v/25 16 nos 72 25 watt vhf hyt 12 nos 73 25 watt vhf kenwood 05 nos 74 25 watt vhf alinco 01 no 76 25 watt vhf sanchar 01 no 77 25 watt vhf simoco 09 nos 78 25 watt vhf motorolla,gm-338, gm-300 04 nos 79 pa box speaker 03 nos 80 4 wire way station equipment 74 nos 81 vf repaeter 01 no 82 battery rack 22 nos 83 cabinet for coach indication board 22 nos 84 cabinet for agdb 06 nos 85 cabinet for pf clock 08 nos 86 cabinet for teb 01 no 87 battery rack 22 nos 88 vf repaeter 01 no 89 4 wire way station equipment 74 nos

Cable End Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector