Latest castors Tenders | Government castors Tenders

Central Government/Public Sector

CTN :40491215

17 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For procurement of tools and plants for stringing in live hot line - 18mm plateena rope with break indicator -500 mtrs , 18mm plateena rope with break indicator -1000 mtrs , hanging rollers - double sheave- for conductor , leight weight single sheave aerial rollers for conductor -acsr moose or zebra or bersimis , two sheeve pulley block 2 nos per set suitable for 20 mm dia poly propylene rope having 5 t capacity , single sheeve pulley -open type- suitable for poly propylene rope-5 tcapacity for 24 mm dia rope , single sheeve pulley -close type- suitable for poly propylene rope5 t capacity for 24 mm dia rope , d-shackles-6.5t capacity , bolted type flat -patta- clamp for 7 by 3.66mm earth wire , 4 sheeve pulley block 5 ton capacity -2 nos- 1set , 12 mm dia steel 300 meter wire rope , articulated swivel joint , equalizer pulley-10 t capacity , light weight automatic type come along clamps for acsr moose conductor , light weight automatic type come along clamps for acsr zebra conductor , light weight automatic type come along clamps for acsr bersimis for 765kv , steel wire rope sling for 12 mm x 1 meter both end spliced , steel wire rope sling for 18 mm x 1 meter both end spliced , steel wire rope sling for 18 mm x 2 meter both end spliced , steel wire rope sling for 18 mm x 2.5 meter both end spliced , steel wire rope sling for 18 mm x 5 meter both end spliced , 12 mm dia-poly propylene rope bundle of 220 meters each , 18 mm dia-poly propylene rope bundle of 220 meters each , 20 mm dia-poly propylene rope bundle of 220 meters each

CTN :40491597

17 Jun, 2025 NA

Khammam-T - Telangana

Tender For supply of shaft with keys as per drawing no. hwpm mu 10 for dia 2515 type a idler sheave

Central Government / Public Sector

CTN :40500801

12 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of single sheave pulley block 3 1/2" x 1/2" fiber groove of contact / catenary wire the complete block including head fittings shall withstand a proof load equal to twice the safe working load ( swl) capacity 2.5 tons. confor m to is 1875 1992. make :- iep, sst or similar (with load test certificate). note: test certificate should be submitted fro m government authorized testing agencies. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39169238

30 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of spares for unit 1 boiler lift for ntpc rihand - steel wire rope,1000040582,tke, pcb sm01pa/i 32 bit,1000043795,tk elev, vfd drive,1000043201,tk elev,37kw, main rope,1000053128,13mm,tk elev, main sheave,1000103597,tk elev

Central Government/Public Sector

CTN :40064627

31 May, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of oe9717182000-sheave 60" , 1-1/2" w. l. - 10" pin- ctcl

CTN :40383932

07 Jun, 2025 NA

Khammam-T - Telangana

Tender For supply of supply of shaft with keys as per darwing no. hwpm/mu/104 for dia 2515 (type-a) idler sheave.

corporations/Associations/Others

CTN :40405322

03 Jun, 2025 NA

Luckwada - Chhattisgarh

Tender For supply of primary crusher spares for ocsl plant - 1600014853 piston drg m 1259 p n 1331 0 , 1600014855 plate piston wearing p n 1341 0 1341 0 , 1600014856 washer step drg m 756 cp rl p n 1342 0 , 1600014852 washer step retainer drg4 496 p n 1343 0 , 1600014868 shaft step p n 1541 0 , 1600014869 shaft retainer plug p n 1542 0 , 1600014860 sheave drive drg m 642 cp p n 102 , 1600014863 driven sheave m 641 cp , 1600014886 bushing spider drg m 567 cp p n 1651 0

CTN :40427134

11 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv

State Government

CTN :40436394

23 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply under etd-i lucknow - supply of t&p materials associated with line and substation under electy. transmission division-i, lucknow, mechanical hydraulic compressor joint machine motorized, for htls conductor jointeing with htls conductor die (iso certified) minimum technical spedification-capacity : 100-150 ton, power : 05-5.5 hp, stroke : 04 stroke, working pressure : 690 bar) with minimum 03 year warranty. nike or equivalent make, accc htls casablanca conductor jointing hydrolic machine, capacity 100 ton with minimum 03 year warranty. (nike or equivalent make), 05 kv digital insulation tester (megger, motwani or equivalent make) li-ion battery extended capacity, rapid charge and other required ts with minimum 03 year warranty., digital multimeter (4 1/2 digit) (motwane make or equivalent) with minimum 01 year warranty., clamp on meter-digital (fluke or equivalent make ) (0-300-600 a), ac and dc voltage to 600v and resistance to 40 kilohm with minimum 02 year warranty., accc htls conductor jointing toold & wheels etc., four sheave pulley nike or equivalent make with tech spec-breaking capacity 300 kn or more, 22 or more groove, rigit frame type, chain pulley block (5 mt) nike or equivalent make., binocular telescope nikon or equivalent make with tech spec-objective lense dist-50, magnification maximum 8, multilayer coated lense 11.8 mm., tool box with wrench set (nike, taparia or equivalent make) having items-b1 hexagon ringh spanner 6x7-30x32 mm (12 pcs.), double open end spanner 6x7-30x32 mm (12pcs.), pipe wrench (02 pcs), grip locking plier (01 pcs.), circlip plier internal straight (01 pcs.), circlip plier external straight (01 pcs.), side cutting plier (01 pcs), combination plier (01 pcs), long nose plier (01 pcs.), water pump plier (01 pcs.), plastic hammer (01 pcs.) ball pein hammer (02 pcs.), screw driver philips pattern 100 & 150mm (02 pcs.) flat screw drivers 250 & 300mm (02 pc.), two-in one screw drivers (02 pct.), adjustable wrench (01 pcs.), 12.5 square drive sockets 8-32mm (22 sockets) (22 pcs.), reversible ratchet (01 pcs.) extension bar (02 pcs.), safety belt (karam full body harness pn 42, udyogi ub102 or equivalent) with minimum 03 years warranty., hydraulic conductor cutter machine use for all acsr, accc type conductor (nike equivalent make) as per technical specification- (size-3/8 inch, weight-5 kg, usage/application-industrial, warranty- 1 year, crimping stroke-700 bar, cutting capacity-up to 40mm material-ms, hydraulic pressure bar-700, packaging type-tool bos) with minimum 02 years warranty.

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

Castors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government And Public Sector