Get complete information related to latest Castors Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Castors Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Castors Tenders.
Tender For corrigendum : supply of phonic wheel (toothed wheel) to kbi part no.i.2.748 or ftrtil part no.1/604545 or escorts drg. no. 3eb6618 an d conforming to rdso specification no. rdso/2011/cg-04, rev.02. [ warranty period: 30 months after the date of delivery ]
Tender For supply of hex head bolt m8x35 for phonic wheel of ctrb(lhb shell with fiat bogies) to rdso dr g. no cg-15071, alt.1, make tvs, tuff, dfl and unbrako only. grade & make should be clearly emb ossed at suitable location of material (on head of bolts & at peripheral face of nuts) for easy traceabilit y and verification and as per latest amendments of document no: rcf/mech/sb-m/2021/1. [ warrant y period: 30 months after the date of delivery ]
Tender For supply of phonic wheel (toothed wheel) to kbi part no.i.2.748 or ftrtil part no.1/60454 5 or escorts drg. no. 3eb6618 and conforming to rdso specification no. rdso/2011/cg-04, rev.04. [ warranty period: 36 months after the date of delivery ]
Tender For supply of phonic wheel as per part no, 1/604545 make m/s faiveley transport india limited or par t no. 1.2.748 of m/s knorr bremse india private limited or similar. [ warranty period: 36 months aft er the date of delivery ]
Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv
Tender For supply of hex head bolt for phonic wheel of ctrb m8x35 as per rdso drg. cg 15071 alt.1. make unb rako/tvs/dfl/tuff. [ warranty period: 30 months after the date of delivery ]
Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/
Tender For supply of set of hex head screw & spring washer for lhb, set consist: (1) hex head screw for eart hing device of ctrb m8x30mm, property class 10.9, conforming to cg-15070 alt.1 (lhb shell with fiat bogies)-01 nos. (2) hex head bolt for phonic wheel of ctrb m8x35mm (lhb shell with fiat bogies), pr operty class 10.9, conforming to cg-15071, alt.1- 02 nos. & (3) spring washer, type-b nominal size for m-8 bolt conforming to is: 3063-1994-03 nos. make: as per drawing no. t-0-2-619, alt. 12 y (or latest alteration): tvs/dfl/ unbreako/tuff only. [ warranty period: 30 months after the date of delivery ]