Latest castors Tenders | Government castors Tenders

corporations/Associations/Others

CTN :41811733

18 Sep, 2025 NA

Guwahati - Assam

Tender For auction sale of rubber scrap,door body panel, boot, trunk,bale body scrap,alloy wheels,seat scrap,fabric scrap,glass scrap,tyre with rim 4w,differential with dead axle,e-waste,battery,wiring harness,alternator starter,radiator and condenser scrap,defaced engine 4w,catalytic converter,motors,compressor,mix steel,leaf spring

corporations/Associations/Others

CTN :41811997

19 Sep, 2025 NA

Multi City - Multi State

Tender For auction sale of mix steel scrap - 4w,mix steel scrap - tractor,dismantled engine scrap - tractor,dismantled engine scrap - 4w,seat scrap,scrap alloy wheels,scrap tyres with/without rim,dismantled engine scrap tractor -aluminium,radiator and condenser scrap

CTN :41016007

10 Sep, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , thinner for cellulose nitrate based paints and lacquers (q3) , plywood bwr grade 1 of size 7 inch 6 ft x 3 ft x 12mm , decorative handle stainles steel 50 or 75mm long , mirror with frame for table dressing ladies fd 251 made out of timber wood with 6mm thick bwr grade ply and mirror of 5mm size 1220 x 366mm , tapestry cloth , teak wood rails of size 45 x 90x 1500 or 1800 duly french polished for table dining 6 or 8 pers complete , top of table centre of size 900mmx450mm x 400mm madeup of 18mm bwr grade i ply covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , mirror with frame for table dressing gents fd 230 made out of timber wood with 6mm thick bwr grade i ply and mirror of 5mm size 750 x 375mm , looking mirror for table dressing gents of size 600 x 375 x 5mm thick , pvc seat of size 455mm x 455mm 4mm thck with wight not less than 1 point 85 kg and grooves 90x10mm 10 nos on seat for chair verandah , top of table office clk of size 1200mmx600mm madeup of 18mm th bwr grade i ply covered with laminate sheet of approved shade and teak wood beading alround the top complete , top of table dinning size 1800 mm x 900mm for 6 pers of size madeup of 18 mm bwr grade i ply covered with 1 mm , long rail for bed hard fd-246of size , top of table of size 3 ft x 2 ft madeup of 18 mm th bwp grade i ply is 710 covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of teapoy of size 600mmx450mm made up of 18mm th bwp grade i ply is 710 covered with 1mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of teapoy verandah of size madeup of 18mm th bwp grade i ply is 710 covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , teak wood arms size 60mmh x25mm w for chair writing , fevicol 1 kgs make pidilite , french polish ready made 35 litrs pack , pvc seat 4mm thick size 430mmx 440mmm having weight not less tha 0 point 5 kgs each including groves 4 x 10mm rlbs moulded alongwith seat chair dinning jco ors , 1st class timber wood beading 25mm x 4mm thick , s s brass lock 4 or 6 lever for almirahs , 50mm dia heavy duty nyln wheel for chair revolving compuer , telescopic channel of size 18 inch , telescopic channel of size 20 inch , telescopic channel of size 12 inch , telescopic channel of size 14 inch , telescopic channel of size 15 inch , knobs brass ss 40mm fancy type , cloth malmal , top of table 3 ft x 3 ft of size 3 ft x 3 ft madeup of 18mm thick bwp gde a ply is 710 covered with 1mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of table writing of size 1145mmx600mm madeup of 18mm th bwp gradea is 710 ply covered with 1mm thick laminate sheet of approved shade and teak wood beading alround the top complete , castors wheel for chair revolving computer , bracket for chair all type , bracket for table all type , teak wood arms size 75mm h x 35mm w x 725mm l for sofa //bid details 2 / 33

Central Government/Public Sector

CTN :41687494

13 Sep, 2025 NA

Dharwad - Karnataka

Tender For tender for supply of furniture for union bank ka - revolving high back mesh chair , low mesh back visitor chair with castors , low mesh back classroom chair with writing desk and attached book storage , revolving medium back mesh chair , low mesh back visitor chair with castors

CTN :41364295

13 Sep, 2025 NA

Khandwa - Madhya Pradesh

Tender For corrigendum : supply of sports items - commercial abdominal bench performance parameters:type of coating on frame of abdominal bench-electrostatic powder coating,provision of high qualitypvc + polyurethane forupholstery-yes,provision of dual reartransport wheels-yes,provision of abs rubberfeet for floor protectionyes,number of levels forheight adjustment-4,warranty in years-1,dimensional andmaterialparameters:material of frame ofabdominal bench-powder coated stainless steel,thickness of frame ofabdominal bench in mm-4.5,thickness of seat andback rest in inches-4,abdominal bench lengthin cm-1640,abdominal bench widthin cm-680,abdominal bench height in cm-990,abdominal bench weightin kg-40,reports:copies of all certifications andreports to beprovided tobuyer on demand at time ofsupplies-na ,incase test reports not available., abdominal exercise machine description:description of the productan abdominal exercise machine is a type of fitness equipment designed to specifically target and strengthen the muscles in the abdominal area,frame description--material of framecolled rolled mild sframe finishing/coating2-layer electrostatic powder coatingpipe shapeoval,thickness-3 mm (12 gauge)material and construction:weight plates and guide rodssolid-steel weight plates. top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; drop down incremental weight system, cast iron weight place, steel guide rod, 3/4" thick solid induction hardened rods of 50-60 hrc,cable-5 mm thick, nylon coated cable,shroud-not applicable,adjustable pulleys-4-1/2" (11 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings,bearingsprecision-machined bearingsthickness of seat (in inches)-3 inch,cushioning type-foam padding,cushioning material-vinyl,adjustable back-yes,dimensionlength (in cm)-131.7 centimeter,width (in cm)-137.8 centimeter,height (in cm)0-153 centimeter,weight (in kg)-201 kilogram,certification:type of certification-en iso 20957,certification numberand date-na,warrantywarranty on frame-7-year warranty on structural frame (coatings excluded),warranty of bearing, guide rods, pulleys and cables-1 year, badminton racket certification:conformity to indian standard is 3659 latest select na , in case racket is not conforming with the indian standard-yes,materialframealuminum alloystemsteeleyeletsnylonframealuminum alloy,genericno. of holes forstringing in frame74mass of badminton without gut-85 to 95 gmcoating select na , in case of no coatingaluminium alloy frame shall be anodized according to grade ac 10 of is : 1868,dimension:overall length of racket ( tolerance - 8 mm)-660,length of the handle (tolerance - 6 mm)146frame width ( tolerance - 3 mm)190frame length ( tolerance - 6 mm)241,packaging and markingmarkingthe following information shall be clearly marked on the frame and the handle of each racket: a) manufacturer s or supplier s name, initials or recognized trade-mark; and b) mass c) bis mark ;ifapplicablepackingbag made up of waterproof material,test reportavailability of test report from central govt/nabl/ilac accredited lab to prove confirmity to specification-notest report no and date-na,name and address of the labnatest report to be furnished to the buyer on demand-no,, badminton shuttle cock box utility:utilitytraining,materialfeather materialsynthetic materialbase corck covered with leather 0.5 to 0.7mm thick,dimensonslength of feathers ( from tip to top of the base )64 millimeterdiameter of circle on which tip of feathers lie 60 millimeterdiameter of the base-27 millimeterheight of base50 millimeter,massmass of shuttle cock5 gram,feathersnumber of feathers16feather fasteningfeathers shall be fastened firmly with thread or other suitable material,pace and flightpace and flightas per clause 4.4 of is 415 latest,,standards and certificationsproduct generally conforming to is 415- 2002 latest-yes,product confirm

CTN :41430559

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for solar technician (electrical) trade under craftsman training scheme (cts) at consignee locations - measuring steel tape: 5 meter, plier: combination, 200 mm, screw driver: insulated, 4 x 150 mm, screw driver: insulated, 6 x 150 mm, screw driver: insulated, 8 x 200 mm, screw driver: insulated, 10 x 250 mm, center punch: 100 mm, electrician s knife: 100 mm, neon tester: 500 v, steel rule: 300 mm, graduated both in metric and english unit, hammer: cross peen, 500 grams with handle, chart: electrical symbol and basic electronic component, pipe vice: 100 mm, hand vice: 50 mm, bench vice: 100 mm, hacksaw frame: adjustable, 250 mm to 300 mm, hacksaw frame: fixed, 150 mm, file: flat, second cut, 200 mm with handle, file: half round, second cut, 200 mm with handle, file: round, second cut, 200 mm with handle, plier: long nose, 200 mm, plier: flat nose, 150 mm, plier: round nose, 150 mm, spanner set: double ended, 6 mm to 32 mm, set of 12, standard wire gauge: metric, portable electric rotary hammer drill machine, crimping tool: 0.5mm to 16mm , crimping tool: 2.5mm , 4mm , 6mm , crimping tool: 25mm to 400 mm , plier: side cutting, 200 mm, wire stripper: adjustable length, hammer: ball peen, 500 grams with handle, scriber: bend and straight, 150 mm, 5 tray cantilever tool box: w:d:h = 450:200:200, 20 mm, plastic tool box: w:d:h = 550:300:250, 20 mm, 7 drawer tool trolley: w:d:h = 700:450:900, 25 mm, allen key set: hexagonal, 1.5 mm to 10 mm, set of 9, scissor: 200 mm, paper, plastic handle, right hand, electrical load trainer, torque wrench: 5 nm to 25 nm, pipe cutter: wheel type, 3 mm to 30 mm, pipe cutter: for pvc pipe, upto 42 mm, engineer s square: 150 mm blade, load bank: variable, 1.2 kw, lamp/ heater type, wire cutter and stripper: 150 mm, earthing plate set, earthing electrode set, micrometer: outside, 0 mm to 25 mm, lc = 0.01 mm, tap and die set, platform trolley: 150 kg, rooftop mounting structure: 2 kw, gi, rooftop mounting structure: 2 kw, aluminium, electrical wiring and switch gear rack: training kit, protective relays and contactors trainer, demonstration board: circuit breakers and fuses, rccb with isolator, demonstration board: electrical cables, solar dc cable: 4 sq.mm, red, solar dc cable: 4 sq.mm, black, mc4 solar connector, hacksaw blade: length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, pickaxe, spade, wheel barrow: 2 wheels, 50 liters, trowel: brick, 8 inch x 5.5 inch, trowel: heart, 6 inch, trowel: plastering, 8 inch x 5 inch, trowel: pointing, 6 inch, plastic tub: 20 liter, manual earth auger, stillson pattern pipe wrench: length = 300 mm, opening = 42 mm, spanner: adjustable, 300 mm, universal quick adjustable multi-function wrench spanner set, multimeter: solar, insulation resistance tester: digital type, hydrometer, solar insulation tester: digital, pyranometer, lux meter: upto 1 lakh lux, magnetic flux meter, clamp meter: solar, soldering iron set: solar technician (electrical), thermometer: digital, 0 to 150 degree celsius, sun shine recorder, weather monitoring station, sunlight radiation meter, magnetic compass, cut model: photo voltaic cell assembly, cut model: lead acid battery, battery: lead acid, tubular, solar, 12v, 150 ah, simulator: solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, demonstrator kit: solar tracker, solar pv e-learning software, halogen lamp with stand, bench grinder: double ended, 200 mm, solar photovoltaic module: 75 w mono crystalline module, solar photovoltaic module: 75 w amorphous silicon module, solar photovoltaic module: 250 w thin film module, solar photovoltaic module: 5w poly crystalline module, solar photovoltaic module: 10w poly crystalline module, solar photovoltaic module: 40w poly crystalline module, solar photovoltaic module: 250w, solar mppt meter, solar charge controller: dusk to dawn automati

Central Government/Public Sector

CTN :41640211

19 Sep, 2025 NA

Mumbai - Maharashtra

Tender For annual rate contract welding machine, model rd 400a. tec [arc welding machine, model rd 400a. technical spec.-model-rd 400a, supply voltage-415 ( tolerance +10% & -10%) frequency-50/60 hz.,cooling-forced air, insulation class-h, primary current-42a, maximum rated at maximum-30,rated kva oca- 65-80v, setting range-50-400a, duty cycle-60%, protection class-ip23, diamention( lxwxh) -720mm x 630mm x 915mm, weight- 155 kgs. features- 1) machine is sturdy & stable of the annual rate contract specially 6010 celulosic, 7018 & 6013 & all types of alloy steel & ss electrodes. 2) prevention of electrod freezing. 3) full-wave silicon rectifire assures trouble free services. 4) heavy duty mounted on 4 wheel. 5) easy to move on heavy duty wheels. 6) better power factor. 7) low demand of primary current for starting. 24 month guarantee on power source. party to submit oem / autherisation & test certificate with warranty. ]

CTN :41567988

15 Sep, 2025 NA

Delhi - Delhi

Tender For tender for supply of dental - brush bur hand wire brass , callipers vernier dental , excavator double ended no 125 oblique 126 , holder cotton wool ss oblique cp height 4 point 5 cm dia 5cm , explorer dental double ended , sanitary waste receptacle with stainless steel body , spatula blunt for plaster and alginate mixing , occlusal plane guide fox pattern , universal dental x ray film holding instrument set with guiding ring for round and rectangular cone applicable for iopa bitewing and endodontic imaging , anatomic articulator with mounting plates , pneumatic crown remover spring loaded with 04 tips and double loop wire , carver and spatula wax fig 5 , flask empire fig 4 metal , flask denture light weight alloy three part complete with ejection plate and ejection plug , saddle chair divided pneumatic for laboratory oblique dentist work on 4 to 6 castors , pliers pin roughening and bending , press flask heavy duty complete , tongs flask lifting , forceps mandible holding ss , forceps tooth no 79 , forceps extracting tooth no 18 stainless steel for left upper large molars , heavy wire cutter upto 1 point 2 mm hard wire , tray impression assorted moldable aluminum orthodontic set of 10 should be color coded or numbered. , curettes gracey set of 7 consisting of sg 1oblique 2 sg3 oblique 4 sg 5 oblique 6 sg 7 oblique 8 sg9 oblique 10 oblique sg 11 oblique 12 sg 13 oblique 14 , scaler tungsten carbide no 210 , intrument filling surface treated for reduced stickiness set of 6 , matrix retainer ss ivory pattern complete , outfit matrix retainer ss siqveland , sterilizer glass bead , box ss autoclavable with perforated stand for 50 to 60 endodontic hand rotary instruments , stainless steel non perforated complete anatomical impression trays with rim lock for edentulous arches upper and lower sizes 0 1 and 5 set of 06 , stainless steel non perforated complete anatomical impression trays with rim lock for edentulous arches upper and lower sizes 2 3 and 4 set of 06 , stainless steel perforated complete anatomical impression trays with rim lock for edentulous arches upper and lower sizes 1 2 and 3 set of 06 , stainless steel perforated complete anatomical impression trays with rim lock for edentulous arches upper and lower sizes 0 4 and 5 set of 06 , stainless steel perforated partial anatomical impression trays with rim lock for edentulous arches upper right left and central sizes 2 and 4 set of 06 , stainless steel perforated partial anatomical impression trays with rim lock for edentulous arches lower right left and central sizes 2 and 4 set of 06

Central Government/Public Sector

CTN :41519485

11 Sep, 2025 6.11 Lacs

Rajkot - Gujarat

Tender For tender for supply of executive revolving chair, teakwood sofa with heavy tapestry, door curtain, cloth with astar, with all accessories with installation. make vista fashion or d decor, executive revolving chair high back godrej ace model or durian or herman miler, roller blinds curtain with all accessories with installation. make vista fashion or ikea or marvel, sliding door file storage unit m/s godrej make or equivalent, revolving chair m/s godrej make or equivalent, executive table with eru attached pedestal m/s godrej make or equivalent, visitor chair m/s godrej make or equivalent, visitor chair with handle support, a seat and back made of foam, upholstered in leather, and featuring high-density foam., high back revolving chair with a seat made of soft moulded foam with a net covering. the back has adjustable lumbar support, and the handle is adjustable with a slide mechanism. make-giderej or similar, wooden table 60*30*30", office chair non-revolving and non (width-570 mm, back rest height-460 mm, back rest width-410 mm,, seat height-460 mm seat width-440 mm & seat depth 450 mm, office/visitor chairs with armrest and cushion seat and back., revolving chairs with cushioned seat, back rest and arm rest of good quality gas lift height adjustable mechanism with chrome finish metallic stand fitted with heavy duty 5 wheal castors. size ht 860 mm, seat height 480 mm, back rest height 500 mm, width 520 mm and depth 460 mm.

Central Government/Public Sector

CTN :41477273

08 Sep, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of ndoor gym-dumbbells set (set of 2.5 kg, 5.0 kg. 7.5 kg. 10.0 kg & 2.5 kg) total weight of all 05 set is 5 kg, table tennis net decathlon any other material nylon assembly, table tennis rackets with 3 ball, table tannis table, matarial of top: partical board, matarial of lages: aluminium alloy, portaiblity (wheels with loking system): yes (08 nos.), open gym, ndoor gym-polyvinyl chloride pvc) skipping rope of length 7 meter, ndoor gym-sports pvc silver swiss gym ball, size 85 centimeter, 10%. novafitness belt 100-240v 50/60hz upright exercise bike as der gem portal id 5116877-55051697684, carom board, carrom playing surface matarial: lacquered plywood, size 73.5cm x 74 cm. thickness of playing furface: 8 mm, carrom playing surface is waterproof yes, table tanis table with following specifications-material of top-particle board material of frame-aluminum alloy material of legs-aluminum alloy portability (wheels yes number of wheels-8 wheels with locking system- 4 size of wheels-100 mm, table cover- yes specification as per attached gemc bq, avon shiatsu foot massager brand: avon (detailed description/specification as per gem contract no. gemc-, 511687728968572 dt.09/03/2024), yoga mates, unbranded door mats as per gemc-511687778755224), yoga matt, matarial ethylene vinayl acetate (eva), lxwxt 180x60x6, shoe polish/shining machine, foot leg massager. number of massage heads provided: 18 (3 x 3 per foot area), on/off heat function: yes, speed options for massage: 3 speed, power consumption: 50 watt, warranty 2 year., table for ironing of clothes, carrom board, playing surface material: lacquered plywood, size 73.5cmx74cm, thickness of playing surface: 8mm, carrom playing surface is waterproof

Castors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector