Latest coating compound Tenders | Government coating compound Tenders

Central Government/Public Sector

CTN :45682234

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods size 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or latest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev.05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in addition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/-0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rdso spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, finishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and transportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal contact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. rdso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to be submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 should be ensured by supplier. [ warranty period: 60 months after the date of delivery ] ]

State Government

CTN :45654985

26 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of coating of condenser tube end plates by brush able ceramic coating and water box by anti-corrosive chemical coating along with supply in unit 1 during coh at khaperkheda tps.

Central Government/Public Sector

CTN :45251048

26 Jun, 2026 NA

Bardhaman - West Bengal

Tender For bid to ras corrigendum : supply of coating compound for slag pot

Central Government/Public Sector

CTN :45527778

25 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : coating compound

CTN :45114077

24 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of wmm 100mm aggregates bitumen 100 grade asphalt layers 25 mm for base , suply of antitermite chemical imidacloprid 5 litre sqm for soil treatment , supply acrylic syntehtic flooring 8 layer resurfacer cushion colour marking , ms pole 76mm dia 4mm thick adjustable height winch including net safety pad , excavation site clearing leveling and grading of subgrade slope 1 100 , anti-termite treatmentimidacloprid by injection methodacross court area , laying and compaction of 100mm wmm base using heavy roller , laying of hot mix asphalt layers 25mm 20mm including compaction and seal coat , 8layer surface resurfacer cushion layers colour coating court marking , volleyball poles with pcc foundation 600x600x900mm fixing alignment

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

CTN :45605186

02 Jul, 2026 2.75 Crore

Kondagaon - Chhattisgarh

Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm

CTN :45098818

26 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of teepol , gn 07 - or air 4207 a ir 4225 or air 4225b or mil-g-25760a , magic bluer qty - 01 , cm 6240 sealing compound pr 1776s , cleaning agent, cm 295, axdrox 6484a chemetail, eca 3104.20 , white spirit cm 208 , resin cm 4001 cms 4977956965 qty - 01 , primer cm 4002 , sealant pr-1771 b-2 cm-6068 , paint remover, cm2976 eca3106.20 ,socostrip a0103n , dry film lubricant , grease, ecs 2241.20, vaseline - 50855, cho-lubee 117 , adhesive cm 664 dhs 172-172.20 ec 2216 b a 3m pack size - 100 ml kit , nyco gn 15 grease g-382 , grease nyco 65 , synclair eca , protective coating cm 3001,cms n8545500102 , paint cm 485 monopol - 5 ltr can , primer cm 488 , paint cm 4127 , hardener for cm4127 cm 4130 , cm 6232, sealing compound , cm324, chemical conversion material ,mil-c-81706 bonderite m-cr 1200, henkel , paint, cm4185, ecs 2018.30.2310,1500 m , aeroshell grease 6 or nyco grease gn-6 cm 116 pack size 1 kilogram can , primer cm 487 dhs186-111-20 , paint cm 489 , d148 ptfe varnish , bonderite m-cr1132 alodine 1132 mil dtl 81706 , rhodosil rtv 147 qty- 2 , protective coating, cm 388, ecs2039, hs347-860 ) /bid number : gem/2026/b/7505213 * /dated: 06-05-2026 & & / bid document 1 / 28

State Government

CTN :45555779

17 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of application of chemical resistant coating to internal surface and epoxy painting to external surface of condensate storage tank unit#7, cstps.

Central Government/Public Sector

CTN :45550707

13 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazardselectrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra = slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact and astm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6 pairs in a carton. various sizes of electrical safety shoe as per requirement (size 5-11) [ warranty period: 30 months after the date of delivery ] ]

Coating Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector