Get complete information related to latest Electrical Circuit Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electrical Circuit Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electrical Circuit Tenders.
Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po
Tender For a.r. & maintenance of 196 hmps flats at south avenue under sub div-1 of ded-201, new delhi. (sh: replacement of defective electrical accessories i/c supply of material).subwork/packages:replacement of defective electrical accessories i/c supply of material. - supplying, installation, testing & commissioning of flood light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage : input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range - 5 deg. to 50 deg. centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%, thd < 10% as per iec 61000-3-2, p. f.≥0.95, ip-66, ik-10, cri >70, under voltage and over voltage protection, emiemc as per cispr -15, lenses for beam angle 30 deg- 120 deg as per the application and the project requirement deg., suitable tilt able fitting, life time (led, driver & electricalcircuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000°k/4000°k /5700°k /6500°k (as per ansi bin), sdcm(standard deviation color matching) <5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 <120 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). (make: havells/ wipro/ philips/ crompton/ regent) 1.1 50 watt , 1.5 sq mm frls pvc insulated single core copper conductor cable., , 4 sq mm frls pvc insulated single core copper conductor cable., , 6 sq mm frls pvc insulated single core copper conductor cable., , s.p. 5/6 a, one way modular switch, , s.p. 5/6 a, two way modular switch, , s.p. 15/16 a, one way modular switch, , 3 pin 5/6 a modular socket outlet, , 6 pin 15/16 a modular socket outlet, , modular bell push, , stepped type modular fan regulator (2 module), , telephone socket outlet modular type, , t.v. socket outlet modular type, , modular blanking plate, , modular base & cover plate for 1 or 2 module, , modular base & cover plate for 3 module, modular base & cover plate for 4 module, , modular base & cover plate for 6 module, , modular base & cover plate for 8 module, , modular base & cover plate for 12 module, , modular gi box for 2 module, , modular gi box for 3 module, , modular gi box for 4 module, , modular gi box for 6 module, , modular gi box for 8 module, , modular gi box for 12 module, , 3 pole mccb, 125 a, 16ka, , 6 amps. to 32 amps. ratings, sp mcb, "c" curve, 10 ka breaking capacity, , 40 amps., 2 pole isolator, , 63 amps., 2 pole isolator, , 100amp., 4 pole isolator, , supply of led batten light (system lumen efficacy ≥105 <120 lm/watt) of following body materials. powder coated die cast /extruded aluminium body (thickness > 1.20 mm) (make: havells/ wipro/ philips/crompton/regent), , 18-22 watt, , 40 watt, , supply of led down lighter (smd type) (system lumen efficacy ≥ 105 <120 lm/watt) of following body materials. powder coated die cast/extruded aluminium body including trim with aluminium reflector (make: havells/ wipro/ philips/ crompton/regent), , 5-7 watt, , 8-10 watt, , 12-15 watt, , supply of led bulb 9 watt b-22/e- 27 type (3 star & above) (white/yellow colour) (make: havells/ wipro/ philips/ crompton/regent), , less credit for damaged and dismantled material received from the work :-, , 5/15/16 amp. switch/socket/bell push/tv antenna socket/telephone socket/dp switch/fan regulator (assorted), , pvc
Tender For annual maintenance contract of installed e&m equipments in central drug standard control organization, gothapatna, bhubaneswar for financial year 2026-27. - & minor repairs of cctv & including, & minor repairs of kone lift i/c, (standard deviation colour matching), (standard deviation colour matching), (t.c.). manufactures word mark/, (unified glare rating) < 19, flicker, / 6500°k (as per ansi bin), sdcm, /6500°k (as per ansi bin),sdcm, <3,, <5, maximum power consumption, >85%, input voltage: 140-270 volt ac,, >85%, operating voltage ac 140-270, >85%, operating voltage ac 140-270, >85%,thd < 10% as per iec 61000-, 1 2,22,718.00 job 2,22,718.00 mr, 1 no 13 passenger lift,, 1.5 sq. mm frls/hffr, pvc, 10% , p. f.≥0.95, ip20, cri ≥80, ugr, 10.1 18 watt 10 618.00 each 6,180.00 mr, 10322 with driver as per the, 11.1 36 watt 10 2,103.00 each 21,030.00 mr, 12 13,877.00 month 1,66,524.00 mr, 12 16,961.00 month 2,03,532.00 mr, 12 21,586.00 month 2,59,032.00 mr, 12 24,086.00 month 289032 mr, 12 24,128.00 month 2,89,536.00 mr, 12 31,890.00 month 382680 mr, 12 4,490.00 month 53,880.00 mr, 12 53,452.00 month 6,41,424.00 mr, 125 kva dg set with amf and, 15u rack 1 13,330.00 nos 13,330.00, 2 x 6 sockets 16a power distribution, 2.5 kv with short & open circuit, 3-2, p. f.≥0.95, ip-66,ik-10, cri >70,, 39.23.3, 4000°k/ 5700°k /6500°k (as per ansi, 61000-4-5, driver efficiency, 70% of initial lumen maintained till life, 70% of initial lumen maintained till life, 90°c)., 90°c)., above 90°c)., aluminium body including trim, aluminium body with driver as per the, and earthing etc. as required with, annual comprehensive maintenance, annual comprehensive, maintenance, annual comprehensive, maintenance, approved by engineer-in-charge as, approved by engineer-in-charge as, approved by engineer-in-charge as, as required, as required., at gothapatna as required, attached & following staff., basis as per terms & conditions, basis) including servicing, preventive, bin), sdcm (standard deviation, bis standard complete in all respect, bis standards and trade mark, body material with pmma and, cable and earthing etc. as required, cable and earthing etc. as required, cables, nvr, switch, cctv camera,, cct 3000°k / 4000°k / 5700°k, cdtl building etc. as reqd., centigrade, internal surge protection of, certificate (t.c.). manufactures word, circuitry) of minimum 50000 burning, colour matching) <3,, commissiong of pa, rectification and, comprehensive and repair, comprehensive and repair, comprehensive and repair, condition at cdtl office building etc, contract (as inspection on monthly, copper conductor single core cable, day electrical complaints, complaint, distribution pane, 250 kva substation,, down lighter (round/ square/, driver & electricalcircuitry), of, dsr-25, efficacy ≥105 <120 lm/watt) supplying, ends , cct 3000°k / 4000°k / 5700°k, ends as per lm80 extrapolation ies, entire lift , etc in cdtl office building, etc in cdtl office at gothapatna as, extrapolation ies tm-21-11 report,, fixture shall be confirming to relevant, fixture shall be of relevant bis, fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., free, (flicker should be below 5 %), life, frequency 50/60 hz, operating temp, general shift) at cdsco on monthly, hours with70% of initial lumen, housing such that led, housing such that led junction, housing such that led junction, i/c external connections with 1.5, in all respect i/c external connections, inspection on monthly basis) including, inspection on monthly basis) including, insulated copper conductor single core, insulated copper conductor single core, internal surge protection of 2.5 kv with, ip surveillance systems i/c maintance, ip20, cri ≥80 , ugr (unified glare, junctiontemperature shall not rise, knocked-down condition (ckd) shape,, led panel light 2x2 ft. (system lumen, lenses for beam angle asper iesna, life time (led, driver &
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electricalcircuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electricalcircuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For purchase of electricalcircuits and machines practical lab equipment for ece department - item name, dc voltmeter analog (0-1) vclass 1.0 ( 1%full scale )accuracy (1000), dc voltmeter analog (0-10) vclass 1.0( 1%full-scale)accuracy (1000), dc ammeter analog (0-500) aclass 1.0( 1%full-scale)accuracy (800), dc ammeter analog(0-10)maclass 1.0 ( 1%full-scale) accuracy (800), auto transformerinput -single-phase, 230v/240v, 50hz, 4a, ac output 0 to 270 vac,class h or class f insulation
Tender For auction sale of condemnation/write off unserviceable material or surplus store items - taxila binocular research microscope m. no. ix , bod incubator 45 x 45 x 45 m no. 915 , hot air oven , streoscope microscope m no. gs 44 , universal illuminator (for stereo microscope) , bod incubator 865 565 550mm m no. 505 , laminar flow m no. 1004 , microscope (scholar) , bod incubator 700 900 650mm , autoclave verticle 450*600ms , automatic low water level of device , pressure control switch , hot air oven 455*605*455mm , kelvinator refrigerator 165 litre , glass distillation app. double , cooling orbital shaker (cis-24) with plate form 250ml flask , voltage stabilizer 2kv logic state , hr 33t-r dew point microvolt meter including accessories vide pi no pr 2202 , infrared thermometer ag-42 including accessories , l-3000a portable area meter including accessories , l1-1600 steady state porometer including accessories , willey mill machine 100*50mm heavy duty , steri humionfier cap. 3 liter (ss body) , pressure chamber apparatus , seed counter numeral -1 , leonard refrigerator cap. 280 liter , hotplate single bajaj make , step down transformer gel make acc. no 3654 , spectronic 21 bausch & lamb make acc. no 26232 , ph meter with manual , coffee grinder , hot air oven 605*910*605mm with accessories , soxhet extraction unit (without gless port stand and clamps) , coil type hotplate , serological water bath ss with fitted , stabilizer of 20hp , power pack electrop zones system item , godrej refrigerator ws 275 with magic eye special repair. no. 00114454 , kel plus six place micro block digestion system m no. kesob automatic nitrogen analyser consisting of flowing parts , automatic distillation system m. no. distyl -em , automatic solvent extraction system four places m. no. scs-4 , centrifuge , fontey micer , vater bath , fcoset electronic precision, balance, m. no. fx400g special repair. no 705004 , microprocessor based uv-visible spectrophotometer (without winter with instruction manual special repair. no. 538 , h meter pen type , gital ph meter , icrowave oven (ifb make m. no. 305c3) with rice cooker , oltage stabilizer (remi m. no. vs-04) , ectronic balance make matter toledo m. nc. ml 204 special repair. no. 08114403 , rvo controlled voltage stabilizer remi vs-03 model , rvo controlled voltage stabilizer remi vs-01 model , ctangular muffle furnace (125*125*250mm) 3kw special repair. no. 5590, and khera , rological water bath thermostatically controlled double walled wer chamber and lid 55 size-32.5*30*17.5 special repair no. 11165 brand era ki-179 , ological water bath thermostatically controlled double walled er chamber and lid 55 60 ^ * 30^ * 1 special repair no. 11166 brand khera 163 , micro tissue homogenizer, high speed with 1/10 hp motor, 10,000 rpm special repair no. 5592 brand khera (cat no. ki-115)
Tender For supply of hermetically sealed compressor,operating voltage 180-260 vac single phase, rated power consumption 475w output rated cooling capacity 926 kcal/h, thermally protected,application low temperature r-134a gas, electricalcircuit cscr, confirming to is: 10617:2018, along with complete electrical accessories, as per sr.dee (chg)bct's drg no.raj/lhb/268.kce 444 hag. [ warranty period: 30 months after the date of delivery ] ]
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - overhauling of electricalcircuit of eot crane and electrical fault rectification during overhauling of unit 10; power house equipment; service provider