Latest female contact Tenders | Government female contact Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45741795

02 Jul, 2026 NA

Deesa - Gujarat

Tender For tender for supply of male-female contacts (y shape) for 11 kv g.o.d switch (lstc) for all s/dn under deesa do-2.

CTN :45715841

20 Jul, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of 7150469333 copper rod of 5mtr length refer tender for tech specs , 7108360153 10 mm ss bolt 50mm long nut, bolt and washer refer tender for tech specs , 7790380043 ryb heat shrinkable sleeve 60 by 10 - 10 mtr each refer tender for tech specs , 7508950903 isolator,air break switch voltage 11 kv refer tender for tech specs , 7150469953 air break switch, female contact refer tender for tech specs , 7508108513 earthing mouths for 11kv ab disconnecting switch feeders refer tender for tech specs , 7135980773 epoxy support insulator,11kv refer tender for tech specs , painting of 11kv 4 pole structure refer tender for tech specs , charges for erection of 11kv ab switch refer tender for tech specs , replacing spares of 11kv structure refer tender for tech specs

CTN :45508266

06 Jul, 2026 49.82 Lacs

Indore - Madhya Pradesh

Tender For corrigendum : supply of following items /material/services - insulated smart connector for dtr, insulated smart connector for ptr, male and female contacts for 11 kv ab switch, male and female contacts for 33 kv, ab switch, 33 kv hardware, 11 kv hardware, ms nut & bolt (assorted size), thermovision camera,, lv brass stud 20mm, hv brass stud, silica gel

State Government

CTN :45543210

02 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For corrigendum : supply of materials for maintenance work at 132kv sub station ghatampur under etd-ii kanpur - jaw assembly suitable for 36kv isolator, rating 2000a made of copper strip, aluminium strip, ms housing with spring nut and bolt as per sample., daw assembly suitable for 36kv isolatorrating 1250a made of copper strip, aluminium strip, ms housing with spring nut and bolt as per sample., terminal connector suitable for 36kv ct terminal rod and other end twin zebra conductor. made of lm-6 aluminium alloy with galv. nut & bolts. as per sample., 132kv special type isolator bi-matellic terminal connector (dropper/runthrough type) 50mm dia. and moose conductor as per sample., terminal connector suitable for 36kv ct terminal rod and other end twin panther conductor. made of lm-6 aluminium alloy with galv. nut & bolts. as per sample., terminal connector suitable for 36kv vcb one end terminal plate and other end twin zebra conductor made of aluminium alloy. with galv. nut & bolts. as per sample., terminal connector suitable for 36kv vcb one end terminal plate and other end twin panther conductor made of aluminium alloy. with galv. nut & bolts. as per sample without holes., terminal connector suitable for 36kv rama make isolator jaw plate size 80x80mm & 12mm thick and other twin panther conductor made of lm-6 aluminium alloy with gal. nut & bolts., multipurpose cleaner dc 2-26 spray type 400ml pack of standard make., 400 watt hpsv ballast suitable for high mast light fitting., termminal connector for 132kv pt suitable for panther conductor made of all alloy lm-06 completer with nut-bolt and washer as per sample., indication led ryb (24-110v) ac/dc standerd make suitable for control panle., silica gel 6-12mm granules of blue colour, sealed pack packing., terminal connector suitable for 36kv rama make isolator jaw plate size 80x80mm & 12mm thick and other twin zebra conductor made of lm-6 aluminium alloy with gal. nut & bolts., nut bolt with washer size 10x50 mm (gi), nut bolt with washer size 12x50 mm (gi), nut bolt with washer size 10x65 mm (gi), nut bolt with washer size 12x65 mm (gi), terminal connector lm-06 all. alloy suitable for 132kv ct heptacare make other end twin panther conductor with gi nut & bolt as per sample., terminal connector made of lm-6 alloy suitable for 33 kv g.nandy make solator jaw plate and other end twin panther conductor with galv. nut, bolts & washer as per sample., cb clamp 145 kv suitable for panther conductor with galv. nut & bolts., supply of female contact for 145kv rama make isolator as per sample., supply of male contact for 145kv rama make isolator as per sample.

Central Government/Public Sector

CTN :45716024

09 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of insertion tool,extraction tool,crimping tool daniel mh800,positioner for male contact,positioner for female contact

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

Central Government/Public Sector

CTN :45727949

11 Jul, 2026 NA

Mumbai - Maharashtra

Tender For : set of speed sensor connector contacts inserts one set consists of 1)female contact inserts as per phoenix contact article no-1584363 2) male contact inserts as per phoenix contact article no-1584350 make -phoenix /harting /weidmuller or equivalent suitable for siemens ac-dc emu rake& authorized dealer to quote only . (material to be purchased from oem or authorized dealer with authorization certificate to be submitted at the time of offer only).one sample to be submitted for approval before supply in bulk [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45388933

06 Jul, 2026 2.63 Lacs

Bangalore - Karnataka

Tender For corrigendum : supply of connector, 'd' type plug 9 male solder contacts g. f polyester insulator j50820/02- 036 style. , mtg. accessories for 9pin d type connector, back hood plastic with strain relief clamp hard ware , dd6c4000048a1a4-mtg. accessories, housing for 2.5 mm 5 contacts, st. connector , dd6c4000001c1a4- female housing, 2mm pitch, 5 pin , dc4c2100012a1a2- connector, crimp female contact , dc4c2050022a7a2-crimp terminal female contact for 2 mm pitch, pin friction lock headerph -connector , connector, 'd' type socket, 9 female solder contacts pbt insulator j 5082001-036 style. , dc4e2201552nsa2- connector, high density 15 pin d-sub male, solder bucket , dc4c2100024a1a2-connector housing receptacle dual 10 positions , terminal short point crimp snap-in receptacle contacts, loose form , mtg. access, hood for 9pin d type connector, top cable entry with cable clamp & jack screws.

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

Female Contact Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector