Latest fixed contactor Tenders | Government fixed contactor Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :45291911

02 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of synchromesh gear ii-iii , pipe line , hex hd screw m12x35 , spring washer b6 , sealing ring 260x5 beier fkm 75 , clamping ring , packing piece , dust proof collar 9131303 , dust seal boot , hose dia 5x8 , seal plain , bracket doublu angle 150 220 045 003 , bushing sleeve 130 029 390 364 , front mudguard lh flap , clutch valve 611006002 , cone belt av x 13x750 , outlet , body contact conductor , pressure switch , bulb 24 v 4w 925947 , tube and fitting metallic 130 076 850 6 , line to brake cylinder , hose fbe 12x630 dmf dmf 12x1.5 , knob , covering bar , bar section , pressure ring 893030170.4 , fixed part of coupling , gasket 690 mm , bowden cable hose 2 000mm , wire 435mm , hose dia 5x8 960 mm , tank yoke , hose 6x1000 tu 40 dkl dkl 14x1.5 , spacer ring 10 ona 301543 , clevis pin14x80x73 156863 72

CTN :45292489

01 Jun, 2026 NA

Delhi - Delhi

Tender For supply of moveable contact carriage , relay with angel piece , socket 19 pin w3 , diode , plug type a , ball bearing 6201 2z c3 , seal kit set consisting of 21 sealing ring , collar 15x32 , collar 20x38 , plug key bolt type , bearing 6206 2z c3

Central Government/Public Sector

CTN :45073196

29 May, 2026 NA

Barh - Bihar

Tender For corrigendum : procurement of generator spares for capital overhauling of 660 mwgenerator for ntpc barh stage ii - bolt,bhel/siemens, compensating shim t=0.2:pm0a65k64b32, compensating shim t=0.5:pm0a65k64b24, compensating shim t=1:pm0a65k64b08, compensating shim t=16:pm0a66h33k73, cover:psk047t028, covering:pm0a67e75c51, cup spring 28*12,5*1,9:pm0a00b34k08, cup spring washer 34*17*1,8:pm0a00a44e79, filling piece:psk037r039, gasket a29*4:pm0a00c64d90, grub screw:psk050p534, grub screw m5*12-0spae:pm0a00a27a52, grub screw m5*8:pm0a67k47h70, grub screw m6*8-0spae:pm0a00a26h73, grub screw m6*8-0spae:pm0a00a27a78, hexagon head screw m10*16:pm0a66h94f53, hexagon head screw m10*40:pm0a54j70g62, holder:pm0a65j76f67, hose:pm0a67f97g74, hose clip 4,8*188:pm0a57a15h52, insulating bolt:pm0a65j76f83, insulating washer b20,5*40*4:pm0a55g45f8, insulation:pm0a66j04g42, lock washer:pm0a67f56a27, lock washer :pm0a67c01b11, lock washer :pm0a67b70c58, lock washer 16*116:pm0a67b69c27, locking bar:pm0a52j27e74, locking bar:pm0a52j27e82, l-profile:pm0a58a64j33, o-ring 320*7:pm0a67c71k57, pipe 11*1,4*57:pm0a65g63a07, pipe 17*2,4*15:pm0a66d91d35, pipe 20*1,9*21:pm0a67k38f22, pipe 20*1,9*34:pm0a66j26k00, pipe 20*1,9*61:pm0a66j04g59, plate 0,1*10*780 :pm0a67a24e63, plate 0,5*55*780:pm0a67a24e71, plug:pm0a67k48e63, plug-in brush holder:p0048962100, profile 103-002*780:pm0a67k52d33, round bar 10 mm: pm0a62b42a70, round bar 5 mm:pm0a55e59e65, round bar 6 mm:pm0a62b42a47, round bar 8 mm:pm0a62b42a54, round nut:pm0a65f52c42, round nut epgm203:pm0a66j13c54, screw bolt ep-gf:pm0a66j13c70, screw plug g1/2a:pm0a00a45d44, screw plug m10*15:pm0a57j42e78, screw plug m20*18:pm0a57j42e86, seal cap:pm0a55a10c43, seal cap:pm0a50b67e02, segment epgc203:pm0a66h52h42, sheet:pm0a67a56c67, sheet epgm203:pm0a66h53b61, shim 12*2:pm0a66e09a79, shim epgc203:pm0a66h73h14, washer b12,5*22*3:pm0a50a00j43, washer b13*28*4:pm0a50a35j23, washer b17:pm0a00a38d07, washer b6,4*11,5*1,5:pm0a61e49e01, plug-in brush holder, hose line, profile, insulating ring l=19, oring d74x3, viton rubber profile l=2670, seal ring, o-ring, o-ring, o-ring,072-00 psk047q570,bhel, sheet, insulating part, insulating part, profile 7.5*9*2400, insulation, pipe 16*1.9*19, 900/7000r:filter mat, kwu:seal strip, insulation, compensating shim:pm0a65k64a74, lock washer 10*70:p0048963500, multi contact band;drg01430501044/16, elr70/90:scru hex a -8.8, m16x120, hex hd bolt,bhel,thdf-115/67, hex hd nut,m16,hts,bhel,thdf-115/67, insulating bolt,111,m12x35,bhel, insulating bolt,112,m12x35,bhel, resin cy-205 for bhel make generator, loctite 222,01350801039,bhel,thdf-115/67, anabond 202,bhel,thdf-115/67, spacer, locking shoe, fbr gls tape,bhel,thdf-115/67, polyster fibre glass tape is:10415, shim epgc203:pm0a66h53a62, shim epgc203:pm0a66h53a70, shim epgm203:pm0a66h53a88, small size valve:psk054u053, spring ring a8:pm0a00a39g10, spring washer b16:pm0a00a44b07, spring washer b8:pm0a52h67d24, taper pin:pm0a61a48h16, washer 24-200hv:pm0a00a38b17, washer a17*35*4:pm0a00a43f96, angle,pm0a67g05g00,bhel,thdf-115/67, ball valve dn25-g1;pn25:psk033p294, brush holder:pm0a68a48e12, gasket,pm0a66a41g90,bhel,thdf-115/67, holding piece:psk017k700, initial guide blade:pm0a67h32k33, initial guide blade:pm0a67h32k41, initial guide blade:pm0a67h32k58, parallel pin a20h8*80:pm0a67f19c31, round nut:pm0a00b79b92, screw bolt:pm0a56k80a22, stationary blade:pm0a67h32j75, stationary blade:pm0a67h32k09, stationary blade:pm0a67h32k17, thdf115/67:insulating gasket, ring, o ring to spec. tg 60158 32x3, seal element, oring 28x3, u-profile ring, o-ring, o-ring, o-ring,01393701017&52,bhel,thdf-115/67, scru hex, bolt hex hd,01390101053,bhel,thdf-115/67, o-ring,11390801007,bhel,thdf-115/67, o-ring,bhel,thdf-115/67, thdf115/67:o ring 193x6, curing agent z,01391201117 & 39,bhel, resin e8702, fine mica powder,01391201117 & 35,bhel, hardener,bhel,thdf-115/67, tension disc, taper pin;end shield(ee)#38#01393701000, araldite av 138,01350801035,bhel, ch

CTN :45252333

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

CTN :45224882

06 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of impeller , nozzle bronze , lff spray , ventilation air dust fileter , port hole 250mm dia with coaming , filter , shock absorber/damper , screw driven 1-2-7 , contact main , bridge type , screw driven , contact bridge type , gasket , gasket , washer spring 24h 65 , valve disk , hose flexible metalic dn 50 pn 25 , distance piece/ bush distance , washer protective , washer protective , washer protective , contact movable , flange(collar) , cock , thrust bearing bush , sealing , disk , disk , shock absorber/damper , shock absorber/damper , valve non return , impeller , impeller , disk , valve suction 2nd stage , packing collar of regulating slide valve , durite coupling , stop angle valve with union ends , durite 22 to 27mm , valve disk , washer , impeller for vaccum pump (wheel impeller) , valve disk , joint nipple and edge union tap brass py 100 dy 25 , union branch bronze dy 32 , union branch bronze dy 6 , union intermediate steel dy 32 , joint nipple and edge union steel dy 10 , unit injector automizer , pipe distributor 1.630mm 8x670 , pipe , pipe , pipe connection starting servo motor tospeed governor

Central Government/Public Sector

CTN :45154027

10 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of bh contact spring assembly in set. one set contains: (i) contact spring 'a'(drg no. cwm 02021 alt-1) -1 no. with contact guide piece(drg no. cwm 02221) -1 no.& contact piece(drg no.cwm 02321) - 1no. in assembled condition (ii) contact spring 'b'(drg no. cwm 02821 alt-1)- 1 no. with contact bits(drg no. cwm 02421)-2 nos in assembled condition (iii) contact spring stiffner (drg no. cwm 02521 alt-1) - 1 no. (iv) stack plate( drg no. 02721 ) (v) insulating piece 'a'( drg no. cwm 02121 alt-1 )-1 no. and insulating piece 'b'( drg no. cwm 02621)- 1 no. [ warranty period: 30 months after the date of delivery ]

CTN :44703628

11 May, 2026 2.00 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of 104 types of iol and ophthalmic products for inhs kalyani through pa - conclusion of price agreement for 104 in number iol & ophthalmic (104 items) for a period of two years at inhs kalyani - iol & ophthalmic, balance salt sterile ophthalmic irregation solution with glutathion disulphide 500ml bottle, inj chondroitin sulfate + sodium hyaluroanate 0.75mg, malayugin ring disposable, malayugin ring disposable 6.25mm or 7.0mm diameter which can be injected via 2.2 mm or larger incision and gives 8 points of fixation on the iris, monofocal bitoric aspheric (at torbi 709m toric), triamcinolone 40mg/ml preservative free for intraocular use injection, bandage contact lens, c3f8 sf6 gas for retina surgery 50ml, disposable iris retractor for stretching small pupils, drape, surgical disposable for eye surgery, 100cm x 70cm, with adhesive area and attached pouch, in presterilised pack, hydrophilic acrylic single piece posterior chamber foldable intra ocular lens implants, uv blocking, aspheric optics, j/c loops, hydrophobic acrylic single piece posterior chamber foldable intra ocular lens implants, hydrophobic acrylic single piece posterior chamber foldable intra ocular lens implants, uv blocking, asheric optics with square edge, preloaded with yellow chromophore, intra ocular lenses, single, multi pieces j/c loop, uv absorbed, power -17d to 23d, sterile eye patch with adhesive, disposable, sterile ot kit for ophthalmology, 26g1/2" needle box of 100, 3 pieces iol (foldable), angled mvr 20g for cataract surgery under local anaesthesia, angled mvr 23g for cataract surgery under local anaesthesia, bandage contact lens (i connect oxyrich-3 lens pack), silicon hydrogel, water content 36%, oxygen flux 97% power should be plain, capsular support segment (1/box) partial ring of pmma with 03 eyelet, 1/box, crescent knife disposable, bevel up, 2.2mm for cataract surgery under local anaesthesia, dark black goggles for eye patient, disposable sideport knife 1.0 for topical cataract surgery, disposable sideport knife 1.2 for topical cataract surgery, disposable sideport knife for cataract surgery under local anaesthesia, disposable sterile eye dress pad, sterile disposable canula 23g for irrigation 100/box, sterile disposable canula 27g for irrigation 100/box, disposable sterile needle size 26g for ophthalmology, intracameral tyrpan blue 0.06%, intracameral moxifloxacin 0.5% in 0.5ml preservative free, sterile solotion, encore microptic gloves powder free 6.5, encore microptic gloves powder free 7.0, lid wipes 12/14/10 per box sterile cleaning wipes impregnated with purified water, single use, eye drape plain with drain pouch 100 x 70cm, adhesive 7x9 cm, iris hook sterile, keratome 1.8mm disposable for cataract surgery under local anaesthesia, keratome 2.2mm disposable for cataract surgery under local anaesthesia, keratome 2.8mm disposable for topical cataract surgery, lens alcon iq foldable hydrophobic size variable as per requirement, non fogging masks for ophthalmology, plated, with fog free foam strip, fluid resistant, fulfilling astm f 1200-11 criteria, astm level 2 protection, opthalmic corneal/scleral (v-lance knife, sterile trolley drape for opthalmology, straight mcr 20g for cataract surgery under topical anaesthesia, mvr blade 20g/23g, straight mcr 23g for cataract surgery under topical anaesthesia, mvr blade 20g/23g, xnit, disposable medical device used in scleral fixation iol surgery, 26g, with silicon stopper and sxcleral marking points at 1.5 and 4.0mm, 1/box, automated preloaded iol (clareon), preloaded, hydrophobic acrylic foldable, single piece pciol, aspheric, asymmetric biconvex, optic diameter 6mm, overall diameter 13mm, uv absorber & blue light filter, a constant 119.1, delivery technology co2 gas powered @ 3mm/sec, single piece foldable acrylic aspheric iol (tecnis1, aspheric iol), hydrophobic acrylic foldable, single piece pciol, aspheric biconvex, optic diameter 6mm, overall diameter 13m

CTN :43830945

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of brush , speed indicator , toothed belt , knob , carbon brush , commutator , screw lp type resi thermo w/o neck , carbon brush , sealing for cover , carbon brush , direct current contractor , ring oil guyidance , aux.contactor , switch yaxely type , toggle , push hood red , push hood white , torsion spring , push hood yellow (pressure hood) , lamp pilot , fuse link , plate indicating , copper segment (contact piece) , toothed belt pulley , clutch electromagnetic , cam circuit element , switch position , terminal strip , conductor rail connector , handle (toggle) , dc contractor 2 pole , al capacitor 10000uf 63v , resistor , magnetic coupling , main contact complete , solenoid valve , side wall compl.(right) , bearing , emergency hand lever , circuit breaker (2000 amp)

Central Government/Public Sector

CTN :42880511

14 May, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of manufacturing and supply of 2500 tpc forgings d d - flange , bush , casing , boss , cover , link , insert , flange , boss , flange , flange , boss , roller , lever var inlet gdvanewith fee , boss , contact bush , sleeve , flange , lever ii stage , flange , cover , flange , flange , flange , casing , left bracket , bracket , casing , casing , casing , injector , sleeve , casing , cover , bush , blank , nut , insert , t-joint , bracket , flange , bracket , casing , t-joint , t-joint , elbow , t-joint , link , flange , sleeve , boss , boss , boss , casing , flange , flange , t-joint , pad nut , plug , t-joint , rack , hinge , t-piece , dog , t-joint , lug , boss , t-joint , flange , t-joint , boss , t-joint , end piece , elbow , t-joint , bracket , t-joint , t-joint , elbow , t-joint , t-joint , bracket , adapter , t-joint , rope , t-joint , inlet guide vane lever , t-joint , union , t-joint , t-piece , casing , t-joint , elbow , t-joint , nut , union , valve casing , flange , t-joint , boss , lock washer , nozzle body , t-joint , link , clip , flange , lower flng , flange , t piece joint , flange , t-piece , t-joint , t joint , union , union , dog carrier , t-joint , lock washer , t-joint , t-joint , t-joint , upper flange , t-piece , cover , adapter , upper bracket , cover , link rod , flange , union , lug , clip , flange , flange , panel , elbow , elbow , bracket , union , contact bush , right pad nut , lever drive , lever , drive lever , safety washerr

Fixed Contactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector