Latest foundation plate Tenders | Government foundation plate Tenders

Central Government/Public Sector

CTN :45735919

20 Jul, 2026 NA

Itarsi - Madhya Pradesh

Tender For supply of lock retraction pin & chain and foundation plate for c.b.c transition coupling drg. no. sk-62724 item no.15 & 14 alt-18. [ warranty period: 30 months after the date of delivery ] ]

CTN :45736726

22 Jul, 2026 NA

North 24 Paragana - West Bengal

Tender For supply of bracket for empty load change over (small) with stiffener plate as per rdsos drg no wd-s-08008-s-10 item no 18 alt-04 or latest. as per drg.no. wd-s-08008-s-10, item no.-18 alt-7. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45727798

20 Jul, 2026 NA

Madhupur - Jharkhand

Tender For supply of stiffener plate of front carrier plate for aar-h type cbc with bdg to rdsos drg. no. rdso/cg/drg/24034, alt.-nil, item 1, confirming mtl & spec. no. is: 3885, pt-ii, gr-v, minimum hardness=35 hrc. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45703782

17 Jul, 2026 NA

Nashik - Maharashtra

Tender For tender for supply of osaero job work for manufacturing of 14 parts ref semfg1031 -stiffner 2 , stiffener 3 , stiffener 5 , stiffener 6 , rear suspension bracket , reinforcement plate , central stiffener , side stiffner , side stiffner , side bracket , side bracket , rear bolt , special bolt , front suspension bracket

Central Government/Public Sector

CTN :45492753

18 Jul, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of 1 angle plate , 2 angle plate , 3 clamp , 4 gasket , 5 flange , 6 bracket , 7 bracket , 8 bracket , 9 panel , 10 spacer , 11 spacer , 12 spacer , 13 spacer , 14 cover plate , 15 base , 16 base , 17 flange , 18 support , 19 web , 20 frame , 21 lock , 22 body , 23 holder with nib , 24 bracket , 25 beam , 26 string , 27 beam , 28 bracket , 29 bracket , 30 string , 31 beam , 32 beam , 33 string , 34 string , 35 beam , 36 stiffener , 37 stiffener , 38 lock , 39 frame , 40 bracket , 41 stopper , 42 plate , 43 insert , 44 stiffner , 45 gasket , 46 bracket , 47 stiffner , 48 rear guide , 49 front guide , 50 rear sprocket , 51 bracket , 52 bracket , 53 bracket , 54 lh wall , 55 wall rh , 56 bracket , 57 bracket , 58 bracket , 59 base , 60 bracket , 61 base , 62 base , 63 base , 64 bracket , 65 packing , 66 base , 67 front bracket , 68 rear bracket , 69 spacer , 70 carrier , 71 plate with thread , 72 insert , 73 insert , 74 insert , 75 insert , 76 cover , 77 locator 35khgsl , 78 plate , 79 plate , 80 plate , 81 stoper , 82 block , 83 block , 84 block , 85 angle , 86 angle , 87 upper internal longeron , 88 upper internal longeron , 89 doulber , 90 e10-0628- i821-001 , 91 e10-0628-i821-002 , 92 rear washer , 93 rear washer , 94 hinge , 95 cover plate , 96 cover plate , 97 plate , 98 strut , 99 strut , 100 strut , 101 profile , 102 profile , 103 support base plate , 104 plate , 105 bracket , 106 bracket , 107 cover plate , 108 bracket , 109 bracket , 110 bracket , 111 base plate , 112 filler plate , 113 reinforcement plate for bottom pane , 114 fairing rear block , 115 panel , 116 panel , 117 string , 118 bracket throttle assembly , 119 bracket throttle assembly , 120 shell , 121 fitting , 122 fitting , 123 body , 124 hatch cover , 125 hatch cover , 126 profile , 127 profile , 128 profile , 129 profile , 130 bottom rh , 131 bottom rh , 132 fairing front block

CTN :45698509

28 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For "high tensile tight lock centre buffer coupler with aar 'h' type head and balanced draft gear to rdso's specification no. rdso/2011/cg-03 rev. 3 with amendment slip no. 01 & without crash element. special conditions: a) rdso drawing no. rdso/cg/drg/24034, alt. 2 shall be used for stiffener plate henceforth. b) stiffener plates as per material specified by rdso drawing no. rdso/cg/drg/24034, alt. 2 (in annealed condition with hardness between 190-245 bhn) shall be used strictly. requisite proof of annealing must be submitted along with each supply positively. this certificate is to be enclosed with the inspection report (for material specification, hardness, etc.) of the lot. c) suitable fixtures and template to be developed by firms for drilling of holes. d) stiffener plates should be painted with red oxide primer and black quick drying paint (irs r6) before fitment to improve corrosion resistance properties. e) 100% hardness testing of stiffener plates shall becarried out by inspection agency. stiffener plates deviating from the specified hardness (190-245 bhn) shall be rejected. f) for stiffener plates meeting the above hardness criteria, lot-wise destructive testing (10% qty.) shall be carried out by inspection agency to verify chemical composition and adequacy of mechanical properties. g) rdso l. no. mc/blb/cbc dated: 31.08.2024 to be followed for silent block of cbc & testing of additional anti-creep." packing instruction: s/mcfpi221 [ warranty period: 84 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45666251

14 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of 1 stringer 20 , 2 stringer 20 , 3 packing , 4 packing , 5 cover plate , 6 cover plate , 7 flange of top rod , 8 internal flange of frame , 9 internal flange of frame , 10 external flange of frame , 11 external flange of frame , 12 bushing , 13 loop , 14 bracket , 15 stringer , 16 hinge , 17 hinge , 18 hinge , 19 hinge , 20 front stringer 23 , 21 front stringer 23 , 22 lh bracket , 23 rh bracket , 24 lower bracket , 25 profile , 26 profile , 27 profile , 28 profile , 29 profile , 30 profile , 31 profile , 32 profile , 33 profile , 34 plate , 35 plate , 36 plate , 37 stiffner , 38 profile , 39 stringer-1 , 40 stringer-1 , 41 stringer 21 , 42 stringer 21 , 43 stringer 21 , 44 stringer , 45 profile , 46 profile , 47 upper external longeron , 48 upper external longeron , 49 gasket , 50 hinge door , 51 gasket , 52 bracket , 53 bracket , 54 diaphragm , 55 t-section , 56 t-section , 57 t- section , 58 t-section , 59 t section , 60 t section , 61 hinge door , 62 hinge door , 63 hinge door , 64 hinge door , 65 hinge door , 66 doulber , 67 profile , 68 profile , 69 cover plate , 70 cover plate , 71 angle , 72 angle , 73 cover plate , 74 doulber , 75 cover plate , 76 cover plate , 77 angle , 78 doulber , 79 doulber , 80 hatch cover , 81 hatch cover , 82 cover plate , 83 profile , 84 profile , 85 strip , 86 cover , 87 profile , 88 profile , 89 bushing , 90 bushing , 91 cover plate , 92 cover plate , 93 stiffener , 94 profile , 95 strut , 96 strut , 97 strut , 98 angle , 99 angle , 100 upper flange of rib * /bid number : gem/2026/b/7701846 + /dated: 23-06-2026 ' ' / bid document 1 / 80

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

CTN :45638442

13 Jul, 2026 NA

Liluah - West Bengal

Tender For supply of stiffener plate for front carrier plate of aar-h type cbc with bdg to rdso's drg. no. rdso/cg/drg/24034, alt. 2 (annexure-1 attached.). stiffener plate shall be of is:3885 pt.:2 gr.: 5 in annealed condition with hardness between 190-245 bhn. [ warranty period: 30 months after the date of delivery ] ]

Foundation Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector