Latest guide bar Tenders | Government guide bar Tenders

CTN :45738423

10 Jul, 2026 NA

Hisar - Haryana

Tender For supply of lv6 mt6 lv6 t 815 mt 6 272 742 700 825 belt spa 12 5x825 pnd 2100968 , lv7 av15 627 963 210 105 filter insert , lv7 hmv 8x8al f7a04800 filter , lv7 hmv 8x8al x0302050 poly v belt alternator drive , lv7 ld cvd x4700314 wheel scotches mt 13290 000857 , lv7 ld cvd x 4735900 wheel nut spanner tommy bar complete , lv7 18117 830a0 valve solenoid , lv7 37011 83100 set ignition , lv7 p 1310439 cover assy , lv7 2520 720 0468324 cover assy 2 , lv7 p3702252 r assy , lv7 4310 003707 x 7408300 pars kit compressor unloader air dryer

Central Government And Public Sector

CTN :45723985

07 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - lot of scrap consisting of ferrous crow bars pinch bar, tommy bars etc. fully formed or broken condition.as available as in the lot.

State Government

CTN :45700018

03 Jul, 2026 NA

Khaperkheda - Maharashtra

Tender For procurement of shock bars and guide bars of rapping mechanism of unit 1 esp for coh.

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

CTN :45698359

20 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply and installation of set of ms heavy duty working table, size- 6 ft length x 4 ft width x 3 ft height, made with 50 x 50 x 5 mm ms angle and , 2 mm ss sheet place on the top with 02 nos of bench vice fitted on table and 1mm ss plate fitted at bottom. 01 set consist - 01 nos table and 02 nos benchvise, bench vise specification = jaw width: 150mm, max jaw opening: 200mm, throat depth: 90 mm, tommy bar length: 150 mm, anvil size: 30 x 40mm, dimension lxwxh: 290x150x140mm, weight: 15 kg [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664289

15 Jul, 2026 NA

Rewari - Haryana

Tender For supply of battery-operated chain saw, heavy-duty, with carbide-tipped blade chain, having thefollowing specifications: high-torque brushless motor, 36v/40v lithium-ion battery system, guide bar length: 14 to 16 inches, automatic chain lubrication system, mechanical safety brake, and a approximate weightof 5.5 kg (including battery)." [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45648094

13 Jul, 2026 2.20 Lacs

Delhi - Delhi

Tender For supply of bearing lawn mower , cutter 24inch lawn mower , cutter 20inch lawn mower , bottam blade 20inch lawn mower , bottam blade 24inch lawn mower , trimmer blade hedge trimmer , carburetter hedge trimmer , real sharpening compound cutting machine , grease , filter kit brush cutter , engine oil , hedralic tractor oil , trolley hydrolic pipe tractor , trolley hook tractor , nylon roll brush cutter , nylon head brush cutter , chain ht75 tree pruner , guide bars tree pruner , recoil starter brush cutter , air filter fs380 brush cutter

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

CTN :45666102

03 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of paint rfu priming red oxide of iron , paint rfu enamel olive green , turprentine , steel angle 20 20 4 mm , paint rfu black , feviclol sr 998 , cotton waste coloured , anabond rtv silicon sealent , rod welding steel , thread locker loclist , paint remover , plywood gen purpose , putty , oil can , tool kit bag , inspection lamp , tyre pressure gauge , grease gun , lever tyre grasegun , tommy bar , inserer and remover pneumatic tyre , tow hook , front reflex reflector white , side marker lamp bracke , side marker lamp with bulb 5w 24v , red reflective tape , retro feflective tape white , yellow reflectlive tape , advance warning triancle lumax , jerry can carrier singl , tank drinking water 150l , strap for water tank , rubber packing , rubber packing for water tank , pin for strap , sa brkt water tank mtg , stay tool box , sa of tool box mounting chan , bracket external stowage brack , instruction plate for cabin , rivet , cable clamp 290 x 4 , cable clamp 2430x 8 , tyre inflator , bent tube , t neck , air reservoir holder , air reservoir 40l , fuel tank belt , fuel gauge floa , lock spring , intake tube to tank * /bid number : gem/2026/b/7702315 + /dated: 23-06-2026 ' ' / bid document 1 / 36

Guide Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Corporations And Associations And Others