Latest guide bar Tenders | Government guide bar Tenders

Central Government/Public Sector

CTN :45737287

20 Jul, 2026 NA

Vadodara - Gujarat

Tender For supply of 16mm thick bracket as per drg. no. skel-4877 ref. -3 for tie bar assembly of wap7/wag9 locos. 6 x 45 degree chamfer at both edge to be done for welding work. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

State Government

CTN :45700018

03 Jul, 2026 NA

Khaperkheda - Maharashtra

Tender For procurement of shock bars and guide bars of rapping mechanism of unit 1 esp for coh.

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

CTN :45661153

07 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For equipment items - parallelogram law apparatusparallelogram law of forces apparatus fitted with stand, travelling microscopebranded travelling microscope 0-200 mm horizontal and 0-150 mm vertical measurement (two separate experiment), helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading., boyle s law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsion pendulumtorsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulumone meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, viscosity apparatusstokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), sonometer apparatussonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight -500 gm each to a total of 3 kg. brass wire (5 m), metre bridgetype: 1 m length, with uniform wire (resistance wire) material: constantan or manganin (low temperature coefficient) scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection) range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v), ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, joule calorimeter apparatuscopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, potentiometer apparatusit features a 1-meter to 10-meter constantan/ manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, deflection magnetometer apparatusdeflection magnetometer apparatus with compass box and two short bar magnets, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, ammeterdc (0 -2 amp), voltmeterdc voltmeter; range 0 10 v, analog, decade resistance boxresistance box 12 month warranty (dial type) - manganin coil-2 dia

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

Central Government/Public Sector

CTN :45664289

15 Jul, 2026 NA

Rewari - Haryana

Tender For supply of battery-operated chain saw, heavy-duty, with carbide-tipped blade chain, having thefollowing specifications: high-torque brushless motor, 36v/40v lithium-ion battery system, guide bar length: 14 to 16 inches, automatic chain lubrication system, mechanical safety brake, and a approximate weightof 5.5 kg (including battery)." [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45648094

13 Jul, 2026 2.20 Lacs

Delhi - Delhi

Tender For supply of bearing lawn mower , cutter 24inch lawn mower , cutter 20inch lawn mower , bottam blade 20inch lawn mower , bottam blade 24inch lawn mower , trimmer blade hedge trimmer , carburetter hedge trimmer , real sharpening compound cutting machine , grease , filter kit brush cutter , engine oil , hedralic tractor oil , trolley hydrolic pipe tractor , trolley hook tractor , nylon roll brush cutter , nylon head brush cutter , chain ht75 tree pruner , guide bars tree pruner , recoil starter brush cutter , air filter fs380 brush cutter

CTN :45509948

01 Jul, 2026 70.00 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of electro-mechanical & instrumentation items for mass balancing reservoir (mbr- supply of pump starter panel including individual vfd for 125 kw (02w+1s), supply of 1.1 kv grade cable- aluminium conductor supply, laying, testing & commissioning 1.1 kv grade, xlpe insulated, stranded aluminium conductor cables, a) 3.5 c x 185 sq.mm, b) 3.5 c x 300 sq.mm, 1.1 kv grade, xlpe insulated, stranded copper conductor, galvanised steel flat strip / round wire armoured, extruded pvc type st2 sheathed, heavy duty cable, a) 3 c x 2.5 sq.mm, supply of gi perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thick sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per is 2629-1989 / is 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification, a) 450(w) x 75(h) x 2.0 mm thick, b) 300(w) x 35(h) x 2.0 mm thick, c) 100(w) x 35(h) x 2.0 mm thick, mechanical items, supply of di pipes k-9, dia 500mm, di fittings 500mm, , , , , , for 300 mm dia butterfly valve, for 500 mm dia butterfly valve, for 600 mm dia butterfly valve, instrumentation items, non-return valve 300 mm dia, , , , supply 10cx 1.5 sq.mm signal cable, supply 1px 1.5 sq.mm signal cable, supply 2cx 1.5 sq.mm signal cable, supply horizontal end suction pump 780m3/hr @40m head, impeller: ss, shaft: ss, casing: ci including pumps with mechanical seal. 120 kw 2w+ 1s, supply of 1/2" pressure gauge 0-10 bar,, supply of butterfly valve, supply of electric actuator, supply of electromagnetic flow meter 500 mm dia, supply of expansion bellow, supply of pressure transmitter, 0-7 kg/cm2,, supply of zero velocity valve 500mm dia

Guide Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Corporations And Associations And Others

Central Government/Public Sector

State Government