Latest juice tank Tenders | Government juice tank Tenders

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

CTN :45725139

14 Jul, 2026 6.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for cane bagass carriar bagass elivetor ke gale huye side plate ko katkar nikalna tatha 5 bata 6 mm nyi purani plate se banakar lagana , cane carriar cane chapar flore shaft ko cane carriar se bahar nikalna tatha usegadi per load karna va wapas aane per truck se niche utarna , cane carriar ke cutter levelar chapar ke hud ko katkar nikalna va nayi purani plate se hud ko marammat naya banakar lagana , inter carriar ke gale w kamjor size plate ko katkar nikalna w uske sthan per 20mm bata 16mm moti plate e sample ke anushar banaker , bagass elivator ki fail a tede traf sut ko eliment karna , bagass elivetor ke gale va kharab bed va spakit ko dismental karna va uske sthan per motor rewinding giar aadi ki fiting ke liye bed banana , mill rollar kalar ko nirdeshanushar banaker lagana kalar me belding karna , transmission giar ke tute cake bed ko nikalna va nirdeshanushar 16mm plate bata 300mm channel se naya banana , vibhinn sthano per gali hui plate ko katkar nayi purani plate se paich lagane ka karya 3mm se 8mm plate tak , mill ke cane carriar ki pratham drive giar may shaft sahit mill haouse me lejakar fitting karna tatha santoshjanak trail dena , boiler ke air hiter ke top cover naye purani plate se naya banakar lagana walding ewam trail dena , mill house ke teeno juice tray ko aluminium electrod se welding karna ewam santoshjanak trail dena , mill house ke rollar ke side plate drawing anusaar banakar lagana ewam welding karna tatha santoshjanak trail dena , head stock ke niche bagal me juice try upar ms plate lagakar welding karna ewam trail dena , cane carriar ke gale huye ewam tedhe huye channel trn aadi ko katkar nikalna tatha uske sthan per punah marammat karke cane carriar lagana , rollar ke veyering guard ko naya banana , rollar ke juice ko naya ya purjo plate se banakar fit karna , cane bagass carriar bagass elivator ke gale huye ranar ko katkar naya ranar lagana egil lagan welding karna , bagass elivator ke gale va kharab sabhi jali ko bahar nikalna tatha nayi jali lagane ke uprant punah fit karna , mill ke suit hud ki gali hui plate ko katkar nikalna tatha uske sthan per nayi purani plate se banakar lagana , purane gale va kamjor dsm skrin ko katkar dismental karna tatha uske sthan per nayi plate se naya dsm skrin banana va jali lagana , bagass boiler ka fan va uske badi ko naya banakar lgana , mill juice tanki ke gale huye batam kon ko katkar nikalna tatha uske sthan per naya banakar lagana va welding karna , mill house per nayi noch plate banana ewam welding kar fit karne ka karya , boilar ke expectra boiler ke gale hue hisse ko katkar nikalna ms plate se banakar lagana welding karna va trail dena , boilar ke gale hue suit bwmas fitter hud ko katkar nikalna tatha naye va purane plate se marammat krna welding va trail dena , boiler ke ander gale hue air heater damfer suit katkar niche utarna tatha naye purane plate se banakar top per lejakar fitt karna tatha trail dena , tothed rollar 800mm dia nayi 16mm plate se banana va uske naye tooth tip draing sempal anusar banakar welding karne ka karya , boiler ke fd fan dampharo ko kaatkar hatana tatha naya banakar fitting karna wa trial dena , air heater ke damphar ke suit ke marammat ka karya belding karna wa trial dena , roller ke ring ko naya plate banakar fit karna , feed roller ke danto ko kaatkar nikaalna wa naya ya marammat karna

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

State Government

CTN :45646230

27 Jun, 2026 26.17 Lacs

Shimla - Himachal Pradesh

Tender For upgradation of existing stp by co receiving tank,co anaerobic sludge digestion tank,co rcc sludge drying bed 40 sqm. and s f of kirloskar make sludge pump with allied accessories,co inlet tank bar screen,co filtrate tank and co holding tank dewateri

Central Government / Public Sector

CTN :45471133

30 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of lhb bio tank safety trap holding bracket as per icf drg no: aab11522, alt nil or latest. [ warranty period: 30 months after the date of delivery ] ]

CTN :45463238

22 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For cleaning and painting work of quad, juice heater, juice tank and other

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

State Government

CTN :45444142

12 Jun, 2026 26.17 Lacs

Shimla - Himachal Pradesh

Tender For upgradation of existing stp by co receiving tank co anaerobic sludge digestion tank co rcc sludge drying bed 40 sqm, sf of kirloskar make sludge pump with allied accessories co inlet tank, barscreen co filtrate tank, co holding tank sludge dewaterin - (t2017-306-1090) sewerage system nac narkanda tehsil kumarsain distt. shimla hp. (sh:- up gradation of existing sewerage treatment plant (stp) by c/o receiving tank, c/o anaerobic sludge digestion tank , c/o rcc sludge drying bed 40 sqm. and s/f of kirloskar make sludge pump with allied accessories, c/o inlet tank & bar screen, c/o filtrate tank and c/o holding tank & sludge dewatering system at stp narkanda).

Central Government/Public Sector

CTN :45449054

20 Jun, 2026 40.00 Lacs

Kamrup - Assam

Tender For supply of combination pliers , screw driver , neon tester , electrician knife , hammer ball pin , file round , plier side cutting , plier round nose , plier flat nose , pliers long nose , hammer chisel , hammer ball peen , wall jumper octagonal mm , center punch , steel measuring tape , allen keys , spanner double ended set of g , adjustable spanner , steel rule , electric soldering iron , rubber gloves , multimeter , tong tester , megger , dc power supply , auto transformer variac , tweezers , crimping tools , common hacksaw , adjustable hacksaw , hand saw , dhau , round knife , tripura dhahu , foldable knife , multi purpose knife , common scissors , hand drill , electric hand drill , steel rule , folding scale , bamboo cross cutting machine heavy duty , bamboo portable crosscutting mc , bamboo radial splitting mc chain type , bamboo round stick making machine , bamboo stick polishing machine , bamboo slicing machine heavy duty , bamboo stick sizing machine , bamboo double side cutting machine, parallel splitter , bamboo four side planing machine , bamboo treatment plant , bamboo dying tank , bamboo knot removing machine , manual slivering machine , universal grinding machine , machine saw , machine planner , hand gloves , portable sanding machine , spray gun , dying chamber , resign applicator , glue mixing machine , spade , steel float , spirit level , chisel , bench vice , c. clamp , gloves canvas , grinding machine with various polishing stones , brush for painting , automatic weaving machine , gas torch , woodturning lathe , table grinding machine , industrial sewing machine , clamps for holding or tightening the jobs , manual ball press machine , sizing machine for window blinds , compressor , manual slivering machine , portable planner , mitre saw , universal planner , suitable work tables , tool cabinet , trainees locker with , storage rack

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

Juice Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

Co-operative