Latest magnet set Tenders | Government magnet set Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45704250

07 Jul, 2026 NA

Dehradun - Uttarakhand

Tender For supply of hummer jump starter , welding holder , drill bit set , hexa blade taparia , sheet cutter ten inch , welding magnet set

CTN :45685085

07 Jul, 2026 25.00 Lacs

Jodhpur - Rajasthan

Tender For operation and maintenance work with material of electrical system in rajmata vijayaraje sindia, krishi upaj mandi samiti (grain), jodhpur mandi samiti campus. - laying and jointing pvc pipe. heading, regularly operation & maintance of existing street pole l.e.d. fitting by need full supply and replacement with all defectives missing and broken accessories such as sodium vapour lamp, heavy duty copper ballast condenser, electronic ignitors, porecelain holder, terminal block and connection wire etc. group-i making elec pole/led lights must be on position.regularly operation and maintance with material of existing high mask light 400 watt flood light and led driver hath required all defective & burnt electric materials replacement such as metal halide lamp heavy duty copper ballast capacitor, electronic ignitor porcelain holder terminal block connection wire etc, and making electric connection including to wiring & un lowing manual & power tool including need full replacement required size of length of cable and connection of testing extra. work have to be executed as per direction of side in charge and complete of testing etc.operation & maintance (with material) of all led/sodium tower/high mask with all street lights of main mandore mandi compus.operation & maintance (with material) of electicity system of office building, testing lab, rest house, check post, pump room, labour shed, warehouse, sulabh complex, staf quarter etc.

Corporations/Associations/Others

CTN :45570241

23 Jun, 2026 NA

Buldhana - Maharashtra

Tender For supply of electrical materials on annual rate contract. - 1.5 sq.mm f.r copper pvc insulated wire., 2.5 sq.mm f.r copper pvc insulated wire., 4 sq.mm fr copper pvc insulated wire., 6 sq.mm fr copper pvc insulated wire., mains with isi mark wp 2 x 2.5 sq.mm. 1100 v grade aluminium pvc insulated cable., mains with isi mark wp 2 x 4 sq.mm. 1100 v grade aluminium pvc insulated cable., mains with isi mark wp 2 x 6 sq. mm.1100 v. grade aluminium pvc insulated cable., retrofit t8 led 18 / 20 tube light., ceiling rose / batten holder /slanting holder /hanging cord switch / hanging bell push/ pendent holder bakelite base 6a., street light bracket made from 25 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., street light bracket made from 32 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., street light bracket made from 40 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., condenser 2.5 micro farad for ceiling fan., ceiling fan of 600mm. sweep complete, ceiling fan of 900mm. sweep complete, energy saving ceiling fan 230 v a.c. 50 cycles 1200mm complete, ceiling fan 230 v a.c. 50 cycles 1400 mm complete, double pole metal clad switch with hc type fuse 240v, 63a, triple pole metal clad switch and fuse 415v, 100a, spmcb 0.5a to 5a, c-series, spmcb 6a to 32a, b- series (for lighting), spmcb 40a to 63a, b- series (for lighting), tpmcb 6 a to 32a, 3 pole mccb upto 100a, 415v, with short circuit rating 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ uv/ trip alarm contact and mccb should have phase barriers both sides, in provided enclosure, hc pattern porcelain fuse bridges with base & hc type fuse links 240v 16a erected on polished wooden block complete, hc pattern porcelain fuse bridges with base & hc type fuse links 240v 32a erected on polished wooden block complete, porcelain fuse bridges with base hc type fuse links 240v 63a erected on polished wooden block complete, porcelain fuse bridges with base hc type fuse links 415v 100a erected on polished wooden block complete, xlpe armoured cable 2 core 6 sq.mm. aluminium conductor with continuous 5.48 sq. mm, xlpe armoured cable 2 core 10 sq.mm. aluminium conductor with continuous 5.48 sq. mm, xlpe armoured cable 3 core 25 sq.mm. aluminium conductor, xlpe armoured cable 4 core 6 sq.mm. aluminium conductor, xlpe armoured cable 4 core 10 sq.mm. aluminium conductor, xlpe armoured cable 4 core 16 sq.mm. aluminium conductor, gi earth wire of high purity of different sizes used for earthing or any other purposes, providing pair of duly tested rubber hand gloves as per is:47705 suitable for working upto 22 kv supply complete., ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230v a.c., electronic type cordless call bell erected on t.w. board having portable bell push working on 9v d.c. battery and (effective range upto 45 meter) bell on 250 v a.c.supply, electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete, double pole isolator only switch version of miniature circuit breaker of 40a, triple pole isolators only switch version of miniature circuit breaker of 63a, triple pole isolators only switch version of miniature circuit breaker of 100a, quartz electronic time switch having 24 hour dial to work on 250 v 50 cycle ac having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16a to use independently or in conjunction with contactor., two pole power contactor 230 v, 12 a for time switch complete, two pole power contactor 230 v, 32 a for time switch complete, four pole power contactor 430 v, 16 a for time switch complete, four pole power contactor 430 v, 40 a for time switch complete, programmable digital almanac timer microcontroller based with real time clock to operate on de

CTN :45540616

29 Jun, 2026 5.18 Lacs

Ujjain - Madhya Pradesh

Tender For providing and fixing of cable and other electric parts at various pump house. - supply of xlpe insulated power cable (conformingis-7098) 1100 volt grade/heavy duty power cable conforming to is1554-1100 volts grade, 2core/3 core/4 core isi marked with alu. stranded /solid conductor armoured 4 core uadd sor no. 14.1.8/p-79, 50 sq.mm(xlpe), 70 sq.mm(xlpe), supplying of isi marked change over switches in sheet encloser confirming to is:4064/ is:13947 (part i & iii) with side handle operated 4 pole with two earthing terminals 7.3/p-36, 100 amps. 415/500 volts.(on load ), 200 amps. 415/500 volts.( off load ), supplying of isi marked and approvedmake of moulded case circuit breaker (mccb) suitable for 3 phase, 3 pole, 50hz, 415 volts, ac supply with respective interrupting capacity (ka) at 415 volts cited against their range standard conforming to is - 88288/p-40, mccb with breaking capacity 35 ka at 415 v current rating 160 amps & adjustable : 70% - 100% thermal & 5-10 times magnetic setting 8.2.1, mccb with breaking capacity 50 ka at 415 v current rating - 400 amps & adjustable : 70% - 100% thermal & 4-10 times magnetic setting, supplying and laying of submersible flat cable isi marked 3 core copper wire of suitable size with proper clamping of approved make.10.0 sq.mm multi strand 11.5/p-165mpphed sor 1st sep. 2023

CTN :45415571

18 Jun, 2026 25.00 Lacs

Cuddalore - Tamil Nadu

Tender For supplying street light materials for annual maintenance in bhuvanagiri town panchayat from 01-04-2026 to 31-03-2027 - 1 1/4 inch g.i bended pipe for 40w /150w / 250w sodium vapour lamp fitting, 1 x 36 w cfl fittings with complete set, 1 x 40 w side holder base, 1 x 40 w street light acrelic cover, 1 x 40 w street light fitting cover, 1 x 40w street light aluminium fitting set with bulb, choke, starter - accessories set, 1 x 40w street light aluminum fitting without chokes, bulb & starter, 1 x 40w watts electronic fittings, 1.0 sq.mm. flex copper m/s wire, 1.5 sq.mm. flex copper m/s wire, 1/18 aluminum wire, 1/18 vir pvc insulated copper wire, 100 amps 4p mcb, 100 amps fuse unit, 100 amps main switch, 100 w led street light fitting, 100 w flood light, 11 w cfl bulb, 11 w cfl choke, 125 w mercury holder, 125 w mercury lamp, 125 w mercury lamp chock, 125 w mercury lamp condencer, 125 w mh condenser, 125 w mh choke, 125 w mh igniter, 150 w led street light fitting complete set, 150 w metal halide fitting set with choke, igniter, condenser, lamp complete set, 150 w sodium vapour lamp bulb, 150 w sodium vapour lamp choke, 150 w sodium vapour lamp condenser, 150 w sodium vapour lamp holder, 150 w sodium vapour lamp igniter, 150 w flood light, 16 amps 2p mcb, 16 amps fuse unit, 16 amps main switch, 18 w cfl electronic choke, 18 w cfl lamp, 18 w led bulb, 1 inch g.i bended pipe for 40w tube fitting, 1 inch pvc wiring bend, 1 inch pvc wiring pipe, 2.5 x 2.5 metal box, 2 x 36 w cfl fittings with complete, 2 x 36 w cfl lamp, 2 x 36 w cflholder, 2.5 sq.mm. 3 core flat cable heavy, 2.5 sq.mm. flex copper m/s wire, 20 w led 4 feet glass tube light, 20 w led fitting with complete set, 200 amps fuse unit, 200 w led street light fitting complete set, 2000 w flood light, 200a fuse wire, 23 w led bulb, 24 w led fitting with complete set, 24w led 4 feet tube light fittings, 250 w sodium vapour condenser, 250 w sodium vapour lamp bulb, 250 w sodium vapour lamp choke, 250 w sodium vapour lamp holder, 250 w sodium vapour lamp igniter, 250 w street light accessories, 250 watts sodium vapour fitting set with choke igniter, condenser, complete without lamp 1 set., 250w / 70w sv lamp cover, 250w mh choke, 250w mh condenser, 250w mh igniter, 250w mh lamp, 25w cfl lamp, 28w led 4 feet tube light fittings, 3/20 aluminum wire, 3/20 vir pvc insulated copper wire, 3/4 inch g.i bended pipe for 40w tube fitting, 30 w led bulb, 30 w led fitting with complete set, 300 w flood light, 32 amps fuse unit, 32 amps main switch, 32amps 2p mcb, 32amps 4p mcb, 35 w spiral cfl lamp, 36 w cfl 4 pin holder, 36 w cfl 4 pin lamp, 36 w led fitting with complete set, 36 w electronic ballast, 36w led 4 feet tube light fittings, 4 core 10 sq.mm. pvc armoured aluminum ug cable, 4 core 16 sq.mm. pvc armoured aluminum ug cable, 4 core 6 sq.mm. pvc armoured aluminum ug cable, 4 x 36 w cfl fittings with complete set, 4 x 55 cfl fitting with complete set, 4.0 sq.mm. 3 core flat cable heavy, 4.0 sq.mm. 4 core flat copper power cable, 4.0 sq.mm. flex copper m/s wire, 40 w led bulb, 40 watts - side holder, 40 watts electronic choke industrial, 40 watts starter, 40 watts tube light, 40 watts vpit copper choke, 400 w mh choke, 400 w mh condenser, 400 w mh holder, 400 w mh igniter, 400 w mh lamp, 400 w flood light, 40amps 1p mcb, 40w tl fitting clamp set, 45 w cfl lamp, 45 w led fitting with complete set, 45 watts cfl power saver street light fittings, 45 watts, 65 watts, 85 watts cfl holder, 48 inch ceiling fan crompton high speed (without regulator), 4 feet 18 w crystal glass led tube light, 5 amps 3 pin & 2 pin wall socket, 5 amps switch, 50 w led fittings with complete set, 500 amps fuse unit, 5000 w street light automatic on/off switch iso: 9000 - 1 set., 500a fuse wire, 50 w flood light, 6 amps to 32 amps 1p mcb, 63 amps 3p mcb, 63 amps 4p mcb, 63 amps fuse unit, 63 amps main switch, 65 w cfl lamp, 65 watts cfl power saver street light fittings, 7/16 vir pvc insulated copper wire

State Government

CTN :45342663

10 Jun, 2026 NA

Itanagar - Arunachal Pradesh

Tender For purchase of equipment for the department of physics--- weight box (gm weight & milligram weight), simple pendulum (bob), young modulus, voltmeter (0-10 volt dc), galvanometer (0-30), voltmeter dc (0-3 volt), battery eliminator (power supply, dc output, 2-12 vol 750ma), post-office box, tangent galvanometer (50 turns coil), spherometer, led and laser diode characteristics apparatus, hybrid parameters of transistor, tomcats pendulum , bar pendant , damping oscillation in various mediums , thermal expansion apparatus , reported apparatus , archimedes principle apparatus , biot-savart law apparatus , photodiode characteristics apparatus , ldr characteristics apparatus, tunnel diode characteristics apparatus, rc coupled amplifier kit, rc phase shift oscillator using opamp, deflection magnetometer set, opamp kit, surface tension by capillary rise, co-efficient of viscosity by poiseuille's method., co-efficient of viscosity by stokes law with photogate, lcr series resonance apparatus, lcr parallel resonance, spring constant set, laser red for diffraction, laser green for diffraction, laser violet blue for diffraction, grating with different grating constant, vibration magnetometer, hall effect apparatus, bh curve tracer, quincks method, piezoelectric transducer kit, mercury lamp, fresnel's biprism diffraction apparatus, bread board with power supply, balmer series and rydberg constant set up, hydrogen discharge tubes for the rydberg constant set up, mercury lamp, michelson interferometer with light source, fresnel bi-prism complete set-up with sodium source, set-up for millikan's oil drop experiment, set-up for de-broglie wavelength. measurement, zeeman effect, lattice parameter se, electron spin resonance , fourier analysis kit , microwave bench set up

CTN :45143998

01 Jun, 2026 NA

Nadia - West Bengal

Tender For corrigendum : supply of electrical materials day to day maintenance in different places under bckv, mohanpur, nadia - 20 watts led battenmodel no. 31423pin : 20 w, lin : 0.10 a, 240 v - 50 hzp.f. : 0.9, ip : 20, cct: 6500 k, ta : 35 degree cmake philipsormodel number : d532065power consumption: 20 wshape: straight linearlength: 115 cmmodel name : 20w 4 feet batten 6500k (cool day)color : whitematerial : polycarbonatemake - wipro or model number : led20wbt-grs65kpro_pk-2model name : grace procolor : whitetype : ledmaterial : polycarbonateshape : straight linearholder : t5 1/2base : b15dmake - orient, 1200 mm sweep a.c. ceiling fan, cupper winding including double ball bearing (brand approved by eic) model - striker, colour - brownmake - ushaormodel - sure breezesea, colour - brownmake - crompton gravesorblade - three blade, volt - 230 v. a.c., frequency - 50 hz, corrosion resistance powder coated blades, colour brown, bee star rated energy efficient ceiling fan, rust free coating for long lifemake bajaj, model - frore, 9 mtrs. insulating tape (pvc), tape width - 18 mm, backing material - pvc- polyvnyl chloride (brand approved by eic)make - anchoreormake - steel gripormake - deon, 400 watts metal halide ballast (brand approved by eic)ballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50 hz +/-5% (make - philips)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 60 hz +/-5%, power factor >0.9 (make - crompton)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50hz +/-5%, circuit type - cwa (make - bajaj), 400 watts 2 pole ingitor (brand approved by eic)model - hpi (-t), 250-400 w s/51/02 ignitor (make - philips)ormodel - ign112s/mh 400 w, power rating 301-400 w (make - crompton)orpower - 400 watts, voltage- 240 v, frequency - 50/60 hz, product name - sn 58/02 (make - bajaj), 400 watts metal halide lamp (brand approved by eic)model - hpit400du - ph; lighting colour - cool white, length - 286 mm; bulb type - t46; diameter - 47 mm, life - 20000 hours (make - philips)orvoltage - 109, power factor >0.85 v, operating current - 438 ma (make - crompton graves)orvoltage - 220-240 v, wattages - 400 watts, colour temperature (kelvin) - 4000 k, cool white, initial lumen - 36000 lm, mean lumen - 24000 lm, cat no. mh 400, lighting technology - metal halide (make - bajaj), 12 watts led bulb (brand approved by eic)light output - 900 lumens; power factor - >0.9 (make - philips)orlight output - 1260 lumens; power factor - >0.9, life 25000 hr. (make - crompton)orbulb colour - white, wattage - 12 watt, lumen - 1400 lm. (make - bajaj), 2.5 mfd. capacitor (brand approved by eic)voltage - 230 volt, frequency - 50 hz, model - tip2.50 mfd, 1200 mm - sweep ac ceiling fan, non pcb oil filled (make - tibcon)orvoltage - 220-230 v, frequency - 50 hz (make - crompton greeves)orvoltage - 220-230 v, frequency - 50-60 hz (make - keltron), fan bearing (brand approved by eic)bearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), fan bearing (brand approved by eic)bearing no. 6202, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), 0.75 sq.mm. cu. wire (brand approved by eic)type unsheathed industrial wire; volt 1100 vmake finolexortype unsheathed industrial wire; volt 1100 v, brand - polycab etira, length - 90 mtrs., weight - 1.2 kg., conductor materials - cupper, current capacity - 14 watt, energy - 3.25 kw at

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

Central Government And Public Sector

CTN :45215819

02 Jun, 2026 NA

West Champaran - Bihar

Tender For standing order/rate contract for supply of miscellaneous electrical materials on f.o.r / door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar. - 60 mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg. (pin type), 50 mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg. (pin type), 45 mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg. (pin type), 42mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg. (pin type), 42mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg., 40 mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg. (pin type), 20 mfd+-50%, 250vac, 50hz condensor, bajaj/phillips/cg., 10 mfd+5% condenser, make-bajaj/phillips/cg., 8 mfd+5% condenser, make-bajaj/phillips/cg., 6 mfd+5% condenser, make-bajaj/phillips/cg., 4 mfd+5% condenser, make-bajaj/phillips/cg., 2.5 mfd+-5%, condensor, make-bajaj/phillips/cg., 3.15 mfd+-5%, condensor, make-bajaj/phillips/cg., electronic igniter, type bj-ign hpsv-a, 250v, 50hz, make-bajaj, 36/40w tube electronic choke, make-bajaj/cg/philips, lamp metal halide lampbt 400w, mbi s/t, make-cg/bajaj, lamp hpmv, lampbt 400w, mbi s/t, make-cg/bajaj, 400w, hpmv, screw type bulb tubeller 250v ac, 50hz, make - bajaj/cg/philips, 400w, hpsv, screw type bulb tubeller shape 250v ac, 50hz, make - bajaj/cg/philips, 150w, hpsv, screw type bulb tubeller shape 220v, sv/mh-bjusm150, make - bajaj/cg/philips, 125w screw type hpmv lamp elip shape (round) 250v ac make bajaj/cg, 125 w 3 pin type hpmv lamp, make-bajaj/philips/cg/isi. std., screw type bulb 100wx 240v, make-bajaj/philips/cg/isi. std., pin type bulb 100wx 240v, make-bajaj/philips/cg/isi. std., screw type bulb 60w x 240v, make-bajaj/philips/cg/isi. std., screw type bulb 60w x 24v ac, make-bajaj/philips/cg/isi. std., pin type bulb 60w x 240v, make-bajaj/philips/cg/isi. std., pin type bulb 15 watt, make-bajaj/philips/cg/isi. std., screw type bulb 0 watt red, make-bajaj/philips/cg/isi. std., screw type bulb 0 watt green, make-bajaj/philips/cg/isi. std., cfl 65w make-orient /cg/siska/havells, bajaj/philips/cg/isi. std., cfl 85w make-orient /cg/siska/havells, bajaj/philips/cg/isi. std., helogen rod 500 watt bajaj make, helogen rod 1000 watt bajaj make, 400w trust light choke housing cat ref:mhb1325ihm/c, 220v/240v, make-crompton crevers, ballast, 150w, type-bjosm150, sv/mh open copper ballast, make-bajaj, ballast, 400w, type-bjosm150, sv/mh open copper ballast, make-bajaj, 150w, 220v, sv/mh open copper choke typebjusm 150, blast 125w, type-bjor 125w/mv, make - bajaj/cg/crompton (km3), v.p.i.t ballast hpmv lamp, 125w, 220v-240v, hdb-12m, make-c&g, tube light starter, make - bajaj/cg/philips, 40w, tube light industrial complete fitting set single set suitable for 4ft. 36/40 watt, make-cg/baja/philips, tube light industrial complete fitting set double set suitable for 4ft. 36/40 watt, make-cg/baja/philips, tube light stick 4ftx40w, bajaj/cg/phillips, tube light stick 4ftx36w, make - bajaj/cg/philips, tube light choke, 40w, make - bajaj/cg/philips, tube light side holder single way, make - bajaj/cg/philips, tube light side holder double way with base, make - bajaj/cg/philips, screw type holder 5amp/250volt, make - anchor/isi std, pendent holder, pin type, make - anchor/isi std, baton holder, make - anchor/isi std, screw type holder, (250-500)w, make - anchor/isi std, pin type holder isi std. 16 amp/250 volt, make - anchor/isi std, 63a, 4 pole mcb, make - hawells, 63a, 2 pole mcb, make - hawells, 40a 4 pole mcb, make - hawells, 32a, 4 pole mcb, make - hawells, 40a, 2 pole mcb, make - hawells, 16a, 2 pole mcb, make - hawells, 25a, 2 pole mcb, make - hawells, 10a, 2 pole mcb, make - hawells, 10a, 1 pole mcb, make - hawells, 16a, 1 pole mcb, make - hawells, 20a, 1 pole mcb, make - hawells, 32a, 1 pole mcb, make - hawells, 6a, 2 pole mcb, make - hawells, 2a, 1 pole mcb, make - hawells, 2a, 2 pole mcb, make - hawells, 4a, 1 pole mcb, make - hawells, 4a, 2 pole mcb, make - hawells, pvc tape red, make - steelgrip, p

Magnet Set Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations/Associations/Others

State Government

State Government

Central Government And Public Sector