Latest magnet set Tenders | Government magnet set Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45704250

07 Jul, 2026 NA

Dehradun - Uttarakhand

Tender For supply of hummer jump starter , welding holder , drill bit set , hexa blade taparia , sheet cutter ten inch , welding magnet set

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Corporations/Associations/Others

CTN :45570241

23 Jun, 2026 NA

Buldhana - Maharashtra

Tender For supply of electrical materials on annual rate contract. - 1.5 sq.mm f.r copper pvc insulated wire., 2.5 sq.mm f.r copper pvc insulated wire., 4 sq.mm fr copper pvc insulated wire., 6 sq.mm fr copper pvc insulated wire., mains with isi mark wp 2 x 2.5 sq.mm. 1100 v grade aluminium pvc insulated cable., mains with isi mark wp 2 x 4 sq.mm. 1100 v grade aluminium pvc insulated cable., mains with isi mark wp 2 x 6 sq. mm.1100 v. grade aluminium pvc insulated cable., retrofit t8 led 18 / 20 tube light., ceiling rose / batten holder /slanting holder /hanging cord switch / hanging bell push/ pendent holder bakelite base 6a., street light bracket made from 25 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., street light bracket made from 32 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., street light bracket made from 40 mm. dia b classg.i. pipe, 0.6m. in length with clamps for suitable pole., condenser 2.5 micro farad for ceiling fan., ceiling fan of 600mm. sweep complete, ceiling fan of 900mm. sweep complete, energy saving ceiling fan 230 v a.c. 50 cycles 1200mm complete, ceiling fan 230 v a.c. 50 cycles 1400 mm complete, double pole metal clad switch with hc type fuse 240v, 63a, triple pole metal clad switch and fuse 415v, 100a, spmcb 0.5a to 5a, c-series, spmcb 6a to 32a, b- series (for lighting), spmcb 40a to 63a, b- series (for lighting), tpmcb 6 a to 32a, 3 pole mccb upto 100a, 415v, with short circuit rating 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ uv/ trip alarm contact and mccb should have phase barriers both sides, in provided enclosure, hc pattern porcelain fuse bridges with base & hc type fuse links 240v 16a erected on polished wooden block complete, hc pattern porcelain fuse bridges with base & hc type fuse links 240v 32a erected on polished wooden block complete, porcelain fuse bridges with base hc type fuse links 240v 63a erected on polished wooden block complete, porcelain fuse bridges with base hc type fuse links 415v 100a erected on polished wooden block complete, xlpe armoured cable 2 core 6 sq.mm. aluminium conductor with continuous 5.48 sq. mm, xlpe armoured cable 2 core 10 sq.mm. aluminium conductor with continuous 5.48 sq. mm, xlpe armoured cable 3 core 25 sq.mm. aluminium conductor, xlpe armoured cable 4 core 6 sq.mm. aluminium conductor, xlpe armoured cable 4 core 10 sq.mm. aluminium conductor, xlpe armoured cable 4 core 16 sq.mm. aluminium conductor, gi earth wire of high purity of different sizes used for earthing or any other purposes, providing pair of duly tested rubber hand gloves as per is:47705 suitable for working upto 22 kv supply complete., ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230v a.c., electronic type cordless call bell erected on t.w. board having portable bell push working on 9v d.c. battery and (effective range upto 45 meter) bell on 250 v a.c.supply, electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete, double pole isolator only switch version of miniature circuit breaker of 40a, triple pole isolators only switch version of miniature circuit breaker of 63a, triple pole isolators only switch version of miniature circuit breaker of 100a, quartz electronic time switch having 24 hour dial to work on 250 v 50 cycle ac having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16a to use independently or in conjunction with contactor., two pole power contactor 230 v, 12 a for time switch complete, two pole power contactor 230 v, 32 a for time switch complete, four pole power contactor 430 v, 16 a for time switch complete, four pole power contactor 430 v, 40 a for time switch complete, programmable digital almanac timer microcontroller based with real time clock to operate on de

CTN :45540616

29 Jun, 2026 5.18 Lacs

Ujjain - Madhya Pradesh

Tender For providing and fixing of cable and other electric parts at various pump house. - supply of xlpe insulated power cable (conformingis-7098) 1100 volt grade/heavy duty power cable conforming to is1554-1100 volts grade, 2core/3 core/4 core isi marked with alu. stranded /solid conductor armoured 4 core uadd sor no. 14.1.8/p-79, 50 sq.mm(xlpe), 70 sq.mm(xlpe), supplying of isi marked change over switches in sheet encloser confirming to is:4064/ is:13947 (part i & iii) with side handle operated 4 pole with two earthing terminals 7.3/p-36, 100 amps. 415/500 volts.(on load ), 200 amps. 415/500 volts.( off load ), supplying of isi marked and approvedmake of moulded case circuit breaker (mccb) suitable for 3 phase, 3 pole, 50hz, 415 volts, ac supply with respective interrupting capacity (ka) at 415 volts cited against their range standard conforming to is - 88288/p-40, mccb with breaking capacity 35 ka at 415 v current rating 160 amps & adjustable : 70% - 100% thermal & 5-10 times magnetic setting 8.2.1, mccb with breaking capacity 50 ka at 415 v current rating - 400 amps & adjustable : 70% - 100% thermal & 4-10 times magnetic setting, supplying and laying of submersible flat cable isi marked 3 core copper wire of suitable size with proper clamping of approved make.10.0 sq.mm multi strand 11.5/p-165mpphed sor 1st sep. 2023

State Government

CTN :45480228

01 Jul, 2026 4.75 Crore

Multi City - Chhattisgarh

Tender For annual maintenance of opgw of different sizes viz. 8/12/24/48/96 fibre opgw strung on 400/220/132 kv transmission line tower or laid underground located in different parts of cg including maintenance of approach cable, fodp etc. and opgw stringing work in live line/of line conditions for replacement of damaged opgw and old/ defective earthwire, laying of approach cable, splicing/ jointing/ testing/ commissioning of opgw, replacement of opgw junction box, hardware & fittings etc, as per requirement for two years

State Government

CTN :45342663

10 Jun, 2026 NA

Itanagar - Arunachal Pradesh

Tender For purchase of equipment for the department of physics--- weight box (gm weight & milligram weight), simple pendulum (bob), young modulus, voltmeter (0-10 volt dc), galvanometer (0-30), voltmeter dc (0-3 volt), battery eliminator (power supply, dc output, 2-12 vol 750ma), post-office box, tangent galvanometer (50 turns coil), spherometer, led and laser diode characteristics apparatus, hybrid parameters of transistor, tomcats pendulum , bar pendant , damping oscillation in various mediums , thermal expansion apparatus , reported apparatus , archimedes principle apparatus , biot-savart law apparatus , photodiode characteristics apparatus , ldr characteristics apparatus, tunnel diode characteristics apparatus, rc coupled amplifier kit, rc phase shift oscillator using opamp, deflection magnetometer set, opamp kit, surface tension by capillary rise, co-efficient of viscosity by poiseuille's method., co-efficient of viscosity by stokes law with photogate, lcr series resonance apparatus, lcr parallel resonance, spring constant set, laser red for diffraction, laser green for diffraction, laser violet blue for diffraction, grating with different grating constant, vibration magnetometer, hall effect apparatus, bh curve tracer, quincks method, piezoelectric transducer kit, mercury lamp, fresnel's biprism diffraction apparatus, bread board with power supply, balmer series and rydberg constant set up, hydrogen discharge tubes for the rydberg constant set up, mercury lamp, michelson interferometer with light source, fresnel bi-prism complete set-up with sodium source, set-up for millikan's oil drop experiment, set-up for de-broglie wavelength. measurement, zeeman effect, lattice parameter se, electron spin resonance , fourier analysis kit , microwave bench set up

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

Central Government And Public Sector

CTN :45254805

10 Jun, 2026 NA

Sonitpur - Assam

Tender For supply and fitment of camera setup in dbws shunting engine "pushpak and chetak" which includes: 27.94cm modl, 2.5k sharp & clear screen 6gb ram, 128 gb rom, 9000mah battery ai-enabled, dolby atoms, hyper os2; solar eye 4gsolar pt camera 4 mp 1/2.8' cmos sensor, low luminance and high definition built in high- performance 4g module that suits all mobile networks.; 64gb memory for moment capture; 20000mah power bank for led screen; led case & magnetic setup for camera including onsite installation [ warranty period: 12 months after the date of delivery ] ]

Magnet Set Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors