Latest mechanical paver Tenders | Government mechanical paver Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government / Public Sector

CTN :45666351

14 Jul, 2026 23.80 Lacs

Ajmer - Rajasthan

Tender For supply of stainless steel work table , salamander , food processor , four burner cooking range with exhaust hood, griller and oven , four door refrigerator , two deck oven , stainless steel storage shelves , stainless steel table , stainless steel tandoor gas operated , griddle plate with stand , potato peeler - 10 kg capacity , wet grinder , vegetable cuting machine , high pressure three burner cooking range , tilting pan , stainless steel work table with marble top , three deck electrical oven , planetary mixer - table top model , prooving chamber , ss cooling racks , demonstration table with granite-marble top , ss sink with drain board with backsplash , ice cube machine , cocktail station , high speed mixer blender , bottle stand , wash basin with box stand , chambermaids trolley , floor signs , luggage cart , prestocine exchange rate board , industrial kitchen chimney - exhaust hood , manifold 4plus4 lpg gas line for kitchen * /bid number : gem/2026/b/7701273 + /dated: 23-06-2026 ' ' / bid document 1 / 35

CTN :45565907

23 Jun, 2026 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

CTN :45253485

15 Jun, 2026 5.14 Crore

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of deep freezer (q2) , laboratory refrigerator (v2) (q2) , 3 roller cane crushing miii , planetary gear box , julce tank , baggase elevator , syrup storage pan capacity , clarifier capacity , syrup pan capacity , final concentrator diamete , dryer for jaggery , jaggery powder elevator , vibrator for juice machine , structure for boiling pan , pulley house , structure for clarifier , thermic fluid heater , bypass station , jaggery powder dryer , jaggery powder grader , weigh bridge , miscellaneous items , jaggery moulds , ane peeler machine , vp 600 p , vp 550 p , batch code printer , anemometer , bomb calorimeter , laminar air flow , uv spectrophotometer , digital polarimeter with touchscreen , digital refractometer , ph meter , moisture analyzer , viscometer , distillation assembly , titration assembly , vacuum oven , muffle furnace , rotary shaker , shaking incubator , mixer grinder , sonicator , soxhlet apparatus , bod incubator , colony counter , laboratory crusher , autoclave centrifuge i cooling centrifuge , hot air oven , weighing balance , rapipol extractor , lab chemicals , lab glassware , packaging forwarding , jaggery cold storage , effluent treatment plant , generator 125kva , natural ventilation polyhouse , transformer and industrial electrification

CTN :45195439

11 Jun, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of microwave oven 32 ltr convention , refrigerator 600 ltr dual door , conventional oven commercial triple deck electric baking oven 225 watt, stainless steel, body size , cooking range for gas burner 10 mtr pipe with regualator siize 48x48x18 inch (square shape) 4 burner , vegetable preparation table size 96x36x30 inch stainless steel body 304 grade 16 gauge , heavy duty 8 pot electric bain marie for buffet purpose 1.5 kw, ss body, single phase size 96x36x30, , egg beater mechanical 10 ltr capacity planetary mixer , commercial water & milk boiler 20 ltr capacity semi-automatic 304 stainless steel body , hot plate electric 3 phase 304 stainless steel mate finish size 48x36x30 inch , vegetable chiller 610 ltr capacity vc cooler dual door stainless steel body , electric tilting pan 80 ltr capacity , rack vegetable 5 shelves size 84x36x24 inch

CTN :45311746

30 May, 2026 NA

Panipat - Haryana

Tender For supply of planetary gear box and spares - horizontal foot mounted planetary gear box spares for bagasse elevator make- top gear transmission pvt ltd. model: 3725 hx mounting: foot red ratio: 166.95:1 rated torque: 224424 nm input: solid input power: 55kw/1440 rpm output speed- 8.62 rpm as per drawing no. 110221-2 rev 1 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 2..horizontal foot mounted planetary gear box spares for main bagasse carrier make- top gear transmission pvt ltd. model: 3850 hx mounting: foot red ratio: 154.31:1 rated torque: 285612 nm input: solid input power: 75kw/1440 rpm output speed- 9.33 rpm as per drawing no. 150221-1 rev 0 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 3..gear box for irc no. 3 spares sr. no.-3670hx ratio:- 189:72:1 code no. ffh3670hx189.72408 make-top gear transmission , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 4..gear box for irc no. 1 & 2 spares sr.no. hg-24520 mfg year- march 2021 type- p3-24 10202057 ratio: 225/1 ip rpm 1500 oil gr. iso vg 320 make- premium transmission pvt ltd , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 5.rbc gear box (complete) make- premium transmission sr.no- hgf-81207 mfg year-16.01.2022 type- sxh3-20 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-290 kg , 6..surplus gear box (complete) make- premium transmission sr.no- hgf-81206 mfg year- 16.01.2022 type- sxh3-16 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-164 kg , 7... bc-01 gear box (complete) make- top gear transmission model- 3725hx ratio- 166.95 code no- ffh3725hx166.9571904 sr.no- 21030145 , 8..rav gear box complete make- radicon type- amd 07-5s kw- 0.75 sr.no- 19/347251 rpm- 1450 actual ratio- 75.121 output torque- 334.0 , 9..batch pan mech. circulator gear box complete. sr. no. hgf-77309 type-vb3sa-250 ratio: - 31.4: 1p1 i/p rom: - 1500, type- helical make-premium transmission. , 10..gear box below complete. sr. no. hgf-77309 type-vb3sa-225 ratio: - 31.4: 1p1 i/p rom: - 1500, make-premium transmission. , 11. planetary gear box complete model: 420horgm sr.no: 21037406 ratio: 1459.84:1 make- top gear transmission , 12. magma mixer planetary gear box complete model: 250horgm sr.no. 210374428 ratio: 87.45:1 make- top gear transmission , 13.. lime preparation tank planetary gear box with motor complete in all respect model: 3280 raio: 92.016:1 make- top gear transmission , 14..raw sugar pugmill planetary gear box with drive complete in all respect model: 280horgm ratio: 358.91:1 make: top gear transmission , 15..slat conveyor u type gear box with motor complete in all respect model: a-337 type- u type ratio: 30:1 make: premium , 16.. sugar bag conveyor u type gear box with motor complete in all respect model: u-500 type: u type ratio: 50 make- premium , 17..sugar bag conveyor u type gear box with motor complete in all respect model: u-600 type: u type ratio: 60 make- premium , 18..sugar bag conveyor u type gear box with motor complete in all respect model: u-400 type: u type ratio: 50 make- premium , 19..sugar bag conveyor u type gear box with motor complete in all respect model: u-800 type: u type ratio: 70 make- premium , 20..sugar elevator planetary gear box (one side rotation) with motor complete in all respect model: 2300hbx ratio: 45:1 make: top gear transmission , 21..fbd elevator planetary gear box (one side rotation) with motor complete in all respect model: 3260hbx ratio: 61.62:1 make: top gear transmission , 22..conveyor belt gear box with motor complete in all respect model: 600 vorxgm ratio: 2856.2 make: top gear transmission

Central Government/Public Sector

CTN :44778143

27 May, 2026 NA

Bokaro - Jharkhand

Tender For bid to ras supply of planetary pan mixer of 1000 kg per batch for dry mixing of castables.

Central Government/Public Sector

CTN :44992976

15 May, 2026 74.38 Lacs

Parganas - West Bengal

Tender For supply of phase preventer , fresh air axial fan system with ducting starter and single phase preventer , pest o flash fly catcher , complete gas bank , fire fighting equipments , potato peeler , electric vaporizer lpg , ss commercial refrigerator , walk in chiller , walk in freezer , heavy duty industrial grade plastic pallet carton and sack stacking , ss 304 three tier onion potato and coconut rack with holes to clean 6inch raisers square piped leg , ss 304 flat shelf rack 4 tier square pipe legs 3 side lip up front lip down entrance in s or m or l or el kitchen respectively , ss 304 flat shelf rack 5 tier square pipe legs 3 side lip up front lip down or ss 304 flat shelf rack 5 tier square pipe legs 3 side lip up front lip down , ss masala box 12 , ss masala box 6 , ss storage container with trolley and lid , ss storage containers small , plasticstorage contaners with lid , food storage container , vegetable storage plastic , multipurpose storage crates 400x300x120mm , baine marie hot and cold , bread toaster , hot cases , baine -marie for soup and sauces , juice dispenser , cereal dispenser , salad trolley , griller , microwave , stanless steel plate thali , milk or tea dispenser , serving spoon , serving laddle , serving platter , soup bowl acralic standard size , serving bowl , rice plate , chutney bowl , stainlees steel ap spoon and fork and dessert spoon soup spoon and knife ap , stainless steel bowl , salad platter , serving tongs , gn pan with lid , salad bowl , rice serving slicer , bread butter knife , serving tray , soup container with lid , spoon sterilizer , menu display board , inventory management software , hand wash sink , colour coded garbage bins- wet waste, dry waste , water cooler , kitchen roll stand , case roll small , ss 304 dish landing flat top table with 1 under shelf debris bin bay and 8 dia chute chute on left or right , hot water system , air cutter , dismanteling and reinstallation of existing kitcehn equipments ss 304 flat single tier porter trolley with hd wheels, ss 304 three sink unit, ms rack 6 tiers, square pipe leg, flat shelf with 3 side, plastic pallet hd, ss framed granite top receiving / sorting table with 1, commercial food processsor with 2 blades, commercial veg cutting machine with 5 blades, food processing pulverizer, ss 304 tilting bratt pan, chef's knife with stand, cleaver (chopper), ss hammer, grater (rectangular/oval), colour cutting board, planetary mixer, commercial tilting wet grinder, commercial hand blender, commercial beach juicer, ss 304 work table with 1 under shelf & 6" flash back, ss 304 work table with 1 under shelf & 6" flash back, ss 304 working table with pallet, chinesse wok, stainless steel stock pot with lid, stain less steel sauce pan with lid, handi with lid, lagan copper handi, ss kadai, ss mis- en- place tray, automatic deep fat fryer, ss commercial high pressure steam cabinet (no boiler re, ss 304 2 tier flat shelved spice trolley with hd wheels, ss 304 commercial bulk cooking burner, ss 304 two burner indian range, ss 304 four burner cooking range, ss 304 chinese two burner cooking range, ss 304 gas tandoor, ss 304 commercial tawa,, tawa round, roti puffer, ss chinnese laddle with wooden handle, ss spatula broad size with //bid details 2 / 87