Latest mechanical paver Tenders | Government mechanical paver Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45715024

15 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For supply of lab equipment items etc( non authorized) - filter paper 18.5 cm (kalpi), lead sub acetate (merck), pen type t.d.s meter (hanna/amaze), pen type ph meter (0.0 to 14.0 ph) (hanna/amaze), digital ph meter sensor (0-10 ph) (hanna/amaze), digital conductivity meter - (hanna/amaze), brix spindle range - (0-10) at 27 °c (standard quality), brix spindle range - (10-20) at 27 °c (standard quality), brix spindle range - (20-30) at 27 °c (standard quality), digital ph meter make - (hanna/amaze), towels small cotton (1.0x1.5 fit) (standard quality), wipar for lab cleaning (standard quality), surf (dit. power ) (standard quality), soap (dettol), universal ph indicator soltions (ph 1.0 - 11.0) make-merck/qualigens, beaume hydrometer brass (0-10), rectified sprit alchohol (merck/qualigens), bucket for juice sample 03 liter (standard quality), enamol mug for sample 1/2 liter (standard quality), hand gloves big size (rubber) ( standard quality ), plastic bucket (10 liter) (standard quality), phenyle floor cleaner (5 ltr), ear plug (standard quality) , what man filter paper (460x570mm) (b.t.b ph paper), cell for pentype ph/t.d.s. meter (standard quality), knife for rapipol extractor (sug fab ceporation) (s.f.c. equipment), tissu paper (standard quality) , absolute alcohol or ethanol 99.9% pure (01 liter bottle) make-merck/qualigens, tarpoline size 20x30 mtr x 30 mtr good quality isi mark 200 gsm, marker pen make- rynolds/cello/camlin, needle for sugar bags sttiching size - gb 230 (standard quality), needle for sugar bags sttiching size - l (standard quality), hand sttiching machine size - 25 no (standard quality), weight machine electronic 100kg (standard quality), hand carts (standard quality), solid fibre wheel for hand cart (200mm ) (standard quality), three play jute twin (standard quality), stiching thread for sticting pp/jute bags 2000 mtr per cone (breaking strength 8 kg) (make- moons/coats/surlon), rechargeable tourch (standard quality), custord oil , common salt crystal size (sodium choloride) (25 kg each bag) , d.a.p (iffco) , urea (only iso) , allum make- (standard quality), rubber braided hose pipe 1 inch heavy duty working pressure 8kg/cm2 make- mansson, plastic mug for sample 01 liter (standard quality), uranium acetate (standard quality) , black polythene (standard quality), alpha nepthol c10h70h make -(aquasol/merck/hanna), jeans cloth for grader & hoppar make- (standerd quality) , dislove oxygen test regent- d.o regent - d.01 make -(aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.02 make -(aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.03 make - (aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.04 make - (aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.05 make - (aquasol/merck/hanna) , safety goggles (standard quality), total hardness test kit make - (aquasol/merck/hanna) , calcium hardness test kit make - (aquasol/merck/hanna) , hydrzine test kit make - (aquasol/merck/hanna) , ortho phophate test kit make - (aquasol/merck/hanna) , silica low renge make - (aquasol/merck/hanna), silica high renge make - (aquasol/merck/hanna) , silica medium range make - (aquasol/merck/hanna) , phophate low label make - (aquasol/merck/hanna) , phosphate high label make - (aquasol/merck/hanna) , alkalinity make - (aquasol/merck/hanna) , chloride make - (aquasol/merck/hanna) , hydrazen test kit make - (aquasol/merck/hanna) , sulphate test kit make - (aquasol/merck/hanna) , g.i. bucket (10 liter) (standard quality) , sulfuric acid (h2so4) n/2.8 normal solution 6amp (standerd quality), sucrose (c12h22o11) (standard quality) , ph - buffer capsule (rang ph 04) (standard quality) , carbon disulfide (cs2) (standard quality) , juice strainer (big size) (standard quality) , barium chloride (bacl2) (standard quality) , starch indicator (standard quality) , glacial acetic acid (standard quality) , potassium dichromat (standard quality) , diagram plant breeder kit 100ml (pla

CTN :45388725

02 Jul, 2026 2.00 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of rubber seat for pan discharge valve , rubber seat for telescope valve , rubber sheet for juice heater exhaust steam valve , rubber seat for juice weingh scale 1 , rubber seat for water weingh scale 2 , neoprene rubber buffer for centrifugal machine for 1250 , neoprene rubber seat for juice clarifier telescopic , neoprene rubber bucket for syrup sepretor cylinde , neoprene rubber ring , rubber sheet for quad ist body semikestner vapour inlet , rubber sheet for quad ist b body semikestner vapour inlet , rubber seat for semikestner vapuour outlet valve , sbr rubber seat for quad ist body exhaust valve , srb rubber seat for semikestner vapou in let valve to quad ist body , srb rubber seat for exhaust valve of juice heater 1 , srb rubber seat for exhaust valve of juice heater 2 , sbr rubber sheet for pan no. 7 b inlet vapour valve , sbr rubber sheet for pan no. 7 a inlet vapour valv , sbr rubber sheet for pan no. 1 a inlet vapour valve 1 , sbr rubber sheet for pan no. 1 a inlet vapour valve 2 , sbr rubber sheet for pan no. 1 a inlet vapour valve 3 , srb rubber seat for juice heater glove valve , srb rubber seat for vapour cell , srb rubber seat for semikestner inlet exhaust valve , srb rubber seat for vapour cell in let exhaust valve , rubber seat for quad , sbr seat for old vapour cell inlet exhaust valve , rubber stoper for juice and water tank , rubber seat for synth epdm nrv 1 , rubber seat for synth epdm nrv 2 , rubber seat for synth epdm nrv 3 , synth epdm rubber seat for nrv 4 , synth epdm rubber seat for nrv 5 , epdm rubber tapar plug for 42x45 brass tube , rubber taper plug for 96x100mm tube id , rubber taper plug for 98mmx100 brass tube id , neoprene rubber bucket for plough cylinder , neoprene rubber bucket for syrup sepretor puenmatic cylinde , neoprine rubber buffer a centrifugal machine 650 kg , neoprine rubber bucket for gate cylinder , neoprine rubber o ring for wk1350 , neoprine rubber seat for double bit valve , neoprone rubber seat for pan angle valve 1 , neoprone rubber seat for pan angle valve 2 , neoprone rubber seat for pan angle valve 3 , neoprone rubber seat for pan angle valve 4 , rubber bucket for brake cylinder , rubber bush 1 , rubber bush 2 , rubber cone 3 , rubber coupling for sugar grader , rubber damping pad for nk 1100 , rubber flat ring , rubber hose pipe 1 , rubber hose pipe 2 , rubber bush dholak type for coupling 1 , rubber bush dholak type for coupling 2 , rubber o ring 1 , rubber o ring 2 , rubber o ring 3 , rubber o ring 4 , rubber o ring 5 , rubber scraper for mud , rubber star for 1250 , rubber strip 1 , rubber strip 2 , neoprene mill hydrulic bucke , rubber mud seal , rubber o ring big , rubber o ring small , rubber bush for trpf coupling , rubber strip

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45415655

30 Jun, 2026 NA

Risod - Maharashtra

Tender For corrigendum : supply, instalation, testing &commissioning ofsupply, installation & testing turmeric processing plant(0.5 tph);turmeric grader mashine ( 0.5 tph )with bucket elevator , , automatic pough packing machine (100-1000 gm),

CTN :45647214

30 Jun, 2026 4.00 Lacs

Sonipat - Haryana

Tender For contract jobs of off season 2026 - contract jobs of off-season 2026., chipping, cleaning & painting/white washing ofc) spray pond & injection channels along with injection house.d) etp with all equipment s and channel from plant to etp., ) chipping, cleaning and painting of all equipment s & machinery centrifugal station (all c/f machine, pug mill , magma mixture, gutters etc.) during off season 2026.b) chipping, cleaning and painting in drier house i.e. hoppers, grader, all sugar elevators, sugar bins, power built machines, bag closure stitching machines, conveyor chains etc., chipping, cleaning & painting white washing/painting of all equipment of clarification house(juice weighing scale, door, oliver filters lime station, sulphur furnances, juice sulphitor and syrup sulphitor along with related jobs., a) chipping, cleaning of top tube plates and bottom tube plates of all juice heaters, evaporators along with ffes etc.b) chipping, cleaning of all juice heaters, evaporators, ffes, all save all s exhaust lines, vapour lines, all valves, all syrup lines, siphons, all syrup lines etc., a) chipping, cleaning & painting, at pan station, top & bottom tube plate with along related jobs.b) chipping, cleaning & painting of all crystallizers along with related jobs.

CTN :45212203

23 Jun, 2026 NA

Ajmer - Rajasthan

Tender For bid to ras bid to ras supply of unbranded seed (dal and rice) cleaning and grader machine 750, = 1000 kg/hour semi automatic

CTN :45620299

02 Jul, 2026 NA

Doiwala - Uttarakhand

Tender For tender for cleaning equipment - heavy duty flexible shaft with double round inner core complete with guard coupling and hand piece having double ball bearing and oil seal for use in 42 mm id brass tubes., size of shaft 16 mm x 8 mtr long, size of shaft 16 mm x 10 mtr long, size of shaft 18 mm x 8 mtr long, size of shaft 18 mm x 10 mtr long, inner core nipple for 16mm shaft, innner core nipple for 18mm shaft, hand piece (16mm shaft), hand piece (18mm shaft), motor adopter for above shaft, inner core for (16mm ), inner core for (18mm ), t.e. type tools head cutter with 15 cutter (12 straight and 3 bevelled) for use with flexible shaft having bsp thread and suitable for 42 mm id brass/ss tube. the tool head cutter will be made of best quality steel material duly hardened and tempered for longer service., spare for above te type tool head cutter size 42 mm, spare pin, spare straight cutter, spare spring, spare bevelled cutter, spare hinge, spare washer, turk head brush made of genuine round spring steel wire 28/29 swg for use with flexible shaft having 1 /2 bsp thread suitable for the tube., 42 mm i.d. tube, 98 mm i.d. tube, scrapper of spring steel suitable for tube cleaning of 98 mm i.d. brass tube, steel wire dusting brush of round spring steel wire provided with wooden handle size 6 x 2 , steel wire brush size 6 x 2 for sugar grader having round spring steel wire, sugar bag trolley complete with polymer wheel (heavy duty) size 10 x 2 x1 and trolley made of steel suitable for carryng 100 kg sugar bag., polymer trolley wheel for sugar trolley size 10 x 2 x 1 , flexible shaft machine mounted on 3 wheel m.s. trolley with carrying handle, 5.00 h.p.ac motor,tefc, 2900 rpm, with cover complete with push button (dol) starter & with 2 mtrs. cts cable, complete with adopters and direct coupled to motor shaft, complete in respects suitable to use with 1 /2 bsp thread flexible shaft, tool head cutter complete with 3 cutters for cleaning of brass tubes size 98 mm id with flexible shaft having 1 /2 bsp thread, brass nozzles monarch for emico-kcp make vacuum filter, brass nozzles for kcp make sd/cfg, machine, bag marking brush oval shape, pad type boring tool hand cutter size 38mm

State Government

CTN :45574153

19 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For supply and installation of each one number of, 1). millet noodles making machine (batch mixer, pasta making machine, tray dryer, band sealer), 2). dhal dehusker & destoner cum grader cum aspirator

Mechanical Paver Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government