Latest mild steel plates Tenders | Government mild steel plates Tenders

Central Government/Public Sector

CTN :45736678

21 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of mild steel plates 5 x 1250 x 6300 mm.to the specification is:2062:2011 (7th rivision) with amendment no-1 of nov-2012,grade e 250 cu. quality a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45677251

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of mild steel plates.

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

State Government

CTN :45583213

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka gadhada under taluka panchayat, gadhada under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials

Central Government/Public Sector

CTN :45576023

30 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of mild steel plates size thickness 16 mm. widths 1250 to 2500 mm. and length 2500 to 4500 mm. to the specification is: 2062:2011 (7th revision) with amendment no-1 of nov-2012, grade e 250, cu. quality a [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45467831

18 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of moving arching contacts f , fixing arching contacts f , spring for 800h 3p edo ac , front facia for edo c-pow , 415v ac uv release , door bezel for c-power ac , 240v ac spring charge mot , sr18g relay , safety shutters for 1600h , spring for 4000h0 4p edo , safety shutters for 4000h , 110v dc shunt release coi , moving arching contacts f , fixing arching contacts f , trip proke unit for tripp , moving arching contact fo , fixing arching contact fo , 6 no 6nc contact block , 240v ac spring charge mot , left plate assembly for 1 , main spring for 1250h 3p , hardware kit , supp. inst. of 1600h 3p , supply, retrofitting, tes

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

Central Government/Public Sector

CTN :45454096

26 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of mild steel plates 5 x 1250 x 6300 mm.to the specification is:2062:2011 (7th rivision) with amendment no-1 of nov-2012,grade e 250 cu. quality a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45393252

18 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of double reinforced high quality abrasive cutting wheel used on angle grinder for cutting stainless steel /mild steel plates size 100(+7/-0) mm (od) x 16mm(id) x1(+0.2/0) mm thick. suitable for max. rpm 15300. conforming to en 12413-2019.brand of bosch or freemans or dwelt or jk super drive orcultine or cuml or workman or hitachi or yuri green line or any equivalent make is acceptable note:-all items should carry standards of material specifications and brands details. ]

Mild Steel Plates Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector