Get complete information related to latest Mild Steel Plates Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mild Steel Plates Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mild Steel Plates Tenders.
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4980 g works for removal and application of insulation and ms cover plate gi sheet al sheet or corrugated sheet at various elevation and location of boiler unit nos..
Tender For to make an arrangement of fork lift big hydra cranes and to and fro for lifting transporting mildsteelplates 14mm thick of various sizes from marol yard and tata compound and laying down systematically to cover 2800 sq. m. area at juhu beach sagar
Tender For supply of replacement and repair maint work of rpl no 12 c c - replacement of existing 04 x hinges of ramp as per sample inclusive all charges , replacement of existing ms iron beam and garder of ramp of front side of size 20 ft and thick 15 mm , repair and maint of ramp winch balancing problem and handle problem of pbs and sbs , replacement of existing 04 x ms iron air wind pipe of both side of size 2 ft 5 inch and 2 mm thick , replacement of existing 01 x fire hydrant valve and 1 x outlet valve as per sample , replacement of existing roof ms plate of sbs of master cabin of size 15 ft x 2 ft 4 inch and 3 mm thick and including ceiling remove and refixing , replacement of existing ms plate of port side near main engine of size 4 ft 4 inch x 3 ft 6 inch and thick 6 mm inclusive all charges. , replacement of existing ms plate of driver cabin bathroom of size 8 ft 4 inch x 3 ft and thick 6 mm and replacement of tile of driver cabin bathroom of size 5 ft 4 inch x 3 ft , supply and fixing of pvc pipe line connection from water tank to both side or bathroom and offr bathroom with kitchen of size l 185 ft, half dia and and , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm , balancing, remetalling of existing sbs propeller fan with brass metal , replacement of rotary pump as per existing specification , replacement of existing 02 x transparent glasses of master cabin of size 24 inch x 18 inch and thick 3 mm inclusive all charges ) /bid number : gem/2025/b/6498570 * /dated: 25-07-2025 & & / bid document 1 / 13
Tender For supply of replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6498546 * /dated: 25-07-2025 & & / bid document 1 / 13
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For supply of 1) mildsteel plate to the10 x 1250 x 6300 to the specification is;2062/2011 grade e 250 a cu. 2) steel corrosion resistance/copper bearing steel plate 12 x1500 x6000 mm is: 2062 fe 410 cuwa 3) copper bearing steel plate 14mm thick to is 2062 /2011 grade e 250 cu wa (k). 4) copper bearing steel plate size 16mm thick to is: 2062/2011 grade e 250 cu wa (k) 5) mildsteelplates 25x2000x6300 to the specification is:2062:2011 e 250 a cu.
Tender For supply of mildsteelplates 60 x 1250 x 5000 to the specification is:2062:2011 grade e 410c with furnace normalization [ warranty period: 30 months after the date of delivery ]
Tender For supply of mildsteelplates 16x2200x5600 to spec. is: 2062:2011 grade e 300 bo. specn: is : 2062:2011 grade e 300 bo. [ warranty period: 30 months after the date of delivery ]