Latest mild steel plates Tenders | Government mild steel plates Tenders

Central Government/Public Sector

CTN :45736678

21 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of mild steel plates 5 x 1250 x 6300 mm.to the specification is:2062:2011 (7th rivision) with amendment no-1 of nov-2012,grade e 250 cu. quality a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45738674

22 Jul, 2026 1.60 Crore

Kullu - Himachal Pradesh

Tender For facing plate set for pivot ring as per drg/spec drg 12030116706-2 it no-71 , facing plate set for top cover as per drg/spec. drg12030116706-1 it no-71

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

Central Government/Public Sector

CTN :45633434

06 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : fabrication and supply of coal compartment assembly with divider plate including nozzle hard facing with bhel materials (osb) and transportation of finished goods to bhel trichy shipping

corporations/Associations/Others

CTN :45676752

18 Jul, 2026 NA

Pune - Maharashtra

Tender For tender for unit repairing work - tender for unit repairing work, work of i beam, housing machining., making hole in standard size to kingpin of i beam (each side). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, making hole in standard size to kingpin of i beam (each side). - tata diesel 9.6 t midi bs-iv continental, making hole in standard size to kingpin of i beam (each side). - eicher 2075 h srl ac cng bs-vi, welding and cutting to slot of stud axle o ring (each slot). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, welding and cutting to slot of stud axle o ring (each slot). - tata diesel 9.6 t midi bs-iv continental, welding and cutting to slot of stud axle o ring (each slot). - eicher 2075 h srl ac cng bs-vi, welding and cutting to bearing slot (each slot). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, welding and cutting to bearing slot (each slot). - tata diesel 9.6 t midi bs-iv continental, welding and cutting to bearing slot (each slot). - eicher 2075 h srl ac cng bs-vi, rimring i beam kingpin hole as per size of pin - per hole. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, rimring i beam kingpin hole as per size of pin - tata diesel 9.6 t midi bs-iv continental, rimring i beam kingpin hole as per size of pin - eicher 2075 h srl ac cng bs-vi, checking out i beam. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, checking out i beam. - tata diesel 9.6 t midi bs-iv continental, checking out i beam. - eicher 2075 h srl ac cng bs-vi, stub axle bush fitting & rimring of pin size - per pair. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, stub axle bush fitting & rimring of pin size - per pair. - tata diesel 9.6 t midi bs-iv continental, stub axle bush fitting & rimring of pin size - per pair. - eicher 2075 h srl ac cng bs-vi, i beam kingpin hole faceseat welding and facing in standard size (per hole). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, i beam kingpin hole faceseat welding and facing in standard size (per hole). - tata diesel 9.6 t midi bs-iv continental, i beam kingpin hole faceseat welding and facing in standard size (per hole). - eicher 2075 h srl ac cng bs-vi, stub axle check nut threading seat welding new threading as per size. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, stub axle check nut threading seat welding new threading as per size. - tata diesel 9.6 t midi bs-iv continental, stub axle check nut threading seat welding new threading as per size. - eicher 2075 h srl ac cng bs-vi, stub axle broken stud/bolt riminig removal drilling tapping (per hole). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, stub axle broken stud/bolt riminig removal drilling tapping (per hole). - tata diesel 9.6 t midi bs-iv continental, stub axle broken stud/bolt riminig removal drilling tapping (per hole). - eicher 2075 h srl ac cng bs-vi, i beam assembly fully opened and fitted back. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, i beam assembly fully opened and fitted back. - tata diesel 9.6 t midi bs-iv continental, i beam assembly fully opened and fitted back. - eicher 2075 h srl ac cng bs-vi, fully overhaul of front axle carrier plate, stud axle tyre rod, dragging rod. - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, fully overhaul of front axle carrier plate, stud axle tyre rod, dragging rod. - tata diesel 9.6 t midi bs-iv continental, fully overhaul of front axle carrier plate, stud axle tyre rod, dragging rod. - eicher 2075 h srl ac cng bs-vi, overhauling tyre rod assembly (parts from pmpml). - tata diesel & cng 1510/1512 tc/1613 marcopolo cng bs-iv, overhauling tyre rod assembly (parts from pmpml). - tata diesel 9.6 t midi bs-iv continental, overhauling tyre rod assembly (parts from pmpml). - eicher 2075 h srl ac cng bs-vi, overhauling tyre rod assembly (parts by the contractor). - tata diesel & cng 1510/1512 tc/1613 marcopolo c

State Government

CTN :45677251

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of mild steel plates.

corporations/Associations/Others

CTN :45637062

25 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For scrap vehicles sales for dharmapuri region - scraped-all ms angles cut pieces and seat frames pieces, scraped g.i.sheet & cut pieces, scraped-used waste engine oil 210 ltr with barrel, scraped 210 ltr empty closed metal barrel, scraped - 182 kgs empty open metal barrel, scraped 200 ltr empty tyre plant barrel, scraped - 210 ltr capacity empty plastic barrel, scraped - gear wheel & shaft, scraped bearing & cone, scraped - clutch plate, scraped-all types of filter(1.090mt), scraped - brake lining & clutch facing(56.642mt), scaped-auto electrical item, scaped -bus wheel disc with ring, scaped computer & printer items 1.thcl- p iv -2.8 ghz -5nos 2.hp- piv- 3.8 ghz -3nos 3.ccs-piv-2.66 quad -4nos 4.hcl -intel core p55 2.66 ghz -5nos printer items 1.tvs hd 245 gold (dot matrix) -6nos 2.tvs hd 245 gold (dot matrix) -9nos 3.tvs msp 455 xl classic(dot matrix)-6nos 4.epson lq1310 classic (dot matrix)-15nos 5. epson l405 inkjet 1no, scraped 12v 21p monolid battery (150ah), scraped 12v 25p monolid battery (180ah), scraped 12v 27p monolid battery (200ah), scraped - frp cowl material(4.445mt), scraped all rubber bed oil seels, fan belts & rubber items, scraped tyre buffing dust at rc unit, scraped-10.00 x20 radial tyre at rc unit, scraped 295/80r/22.5 tube less radial tyres at rc unit, scraped-10.00x20 tube with mouth at rc unit, scraped-10.00x20 curing envelopes at rc unit, scraped-10.00x20 tube cut pieces at rc unit, scraped-converted from bonder (2 tyre electric chamber) at rc unit, scraped-2 tyre electric chamber) at rc unit, scraped tyre buffing machine at rc unit, scraped tyre building machine at rc unit, scraped tyre repair spreader at rc unit, scraped tyre curing rim at rc unit, scaped-ply wood(3.793mt), scaped-fly wheel with ring

CTN :45635494

30 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2) (q2) , unitary air conditioner (window ac) (v3) isi marked to is 1391 (part 1) (q2) , servo motor operated automatic line voltage correctors conforming to is 9815 (part 1) - single phase applications (q3) , material and labour for sub-main wiring surface type with two run of pvc insulated, unsheathed, frls single core and one run of 4.0 sqmm copper conductor , supply and fix single pole and neutral enclosure 240 volt, 20 amps with a two pin and earth plug and socket complete with one single pole mcb , m and l cutting chases, pinning in making good to facing where required and pointing in cement mortar 1-3 to ends or edges of landings, steps, cils, sunshades sheleves, lintels, etc , material and labour for sub-main wiring surface type with two run of pvc insulated.unsheathed, frls single core and one run of 6.0 sqmm copper conductor , m and l for stand bracket fabricated from structural steel section suitable for 3 ton ac outdoor unit including nut, bolt, washer, welding. bedding cold or hot , supply and install hi wall split units indoor and outdoor complete with cordless remote control unit with inbuilt air ioniser and plasma filter 5 star cap 3tr , supply and fix single pole and neutral enclosure 240 volt, 40 amps with a two pin and earth plug and socket complete with one single pole mcb , supply and install vertical tower type unit indoor and outdoor complete with cordless remote control unit, inverter 1 ph units 220v- 240v capacity 2tr , s and f motor starter 25 amp with on off push type switch, modular type two module make make legrand-gm-havells , s and f socket 25 amp modular type two module make legrand-gm-havells , s and f metal flush box, modular type four module make legrand-gm-havells , s and f cover plate with metal frames, modular type four module make legrand-gm-avells , m and l for stand-bracket fabricated from structural steel section suitable for 1.5 ton- 2 ton ac outdoor unit including nut, bolt, washer, welding. bedding cold or hof, drilling holes for bolts , supply and fix power socket 240 volt ac 25 a 2 module all as specified and directed , supply and fix 25 a motor starter 2 module all as specified and directed , supply and fix modular white cover plate metallic frame 2 module all as specified and directed

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

Mild Steel Plates Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government