Latest ms channel Tenders | Government ms channel Tenders

State Government

CTN :45721049

08 Jul, 2026 2.16 Lacs

Jaipur - Rajasthan

Tender For supply of modular kitchen accessories at raj bhawan campus, jaipur - providing & fixing telescopic channel of approved make for drawers with screws complete as per approved by engineer in charge. 500mm long, providing & fixing drawer handle of approved make for drawers with screws complete as per approved by engineer in charge. 150mm long, providing and fixing is : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete., providing and fixing s.s. rod 30mm dia (304 grade ,16swg) including brackets fixed with c.p. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings.

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

corporations/Associations/Others

CTN :45484654

02 Jul, 2026 17.30 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of ms flat size width 50mm thickness 06mm , 1309 hsm plate is 2062 10x1500x6300 mm , hr plate 6mm 250 grade is2062e250br , hr plate 3.15mm 250 grade is2062e250br , plate pmis 12mm , 1307 channel ismc 100 100x50x5 mm , 1307 channel ismc 125 125x65x5.30 mm , 1307 ms channel 200x75 mm

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :45737309

10 Jul, 2026 NA

Jamshedpur - Jharkhand

Tender For set of safety bracket assembly of bp and fp end cocks for wag 9/wap-7 locomotives consisting of two items-- (i) ms plate for bracket assembly of bp and fp end cocks for wag-9/wap-7 loco s as per s.c. rly. drg. no.- c/els/lgd/ex.ftg/4/25 material: ms as per ls: 2062. note: thickness of the plate is 20mm instead of 16mm. qty.= 01 no. & (ii) ms channel of size 150 x 75 x 6 (430 mm long) al ong with ms plate of size 150 x 75 x 16 mm i.e. ms plate (ref: 2) to be welded to the channel (ref:1) a t one end as per s. c. railway drg. no.- c/els/lgd/ex.ftg/3/12 (alt.-1), reference no.- 1 & 2 qty.= 02 nos. (1 set= 2 items in 3 nos.) (04 set of sample to be got approved before bulk supply of material). [ warranty period: 30 months after the date of delivery ] ]

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45419191

01 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For bid to ras corrigendum : tender for supply of furniture items - aluminum knob , readymade tw side for teapoy , thinner for polish 4 liter packing , lakh dana , readymade timber side rails for chair dining , touch wood in 1 ltr pack , readymade timber back legs for chair dining , pu polish , readymade tw flat batten , primer wood in 1 ltr container , plastic laminated sheet teak face , readymade tw flat batten for table dining six pers , locks 65 mm 6 levers , readymade tw flat batten 48x2x1 inch for table dining six pers , knob for cub board 40mm , fevicol in 1 kg , readymade timber front legs for chair dining size 18x1x2 inch , fevicol in1 kg sr hetax , readymade tw flat batten 48x2x1 inch for table writing , paint enamel white in 1 ltr pack container , readymade legs for teapoy , paint enamel smoke gray , readymade tw flat batten , paint enamel olive green , castrel wheel pvc 50 mm dia , black screw full threaded 20mm , plywood , readymade tw side rail for teapoy 24x2x1 inch , readymade tw side rail for teapoy 18x2x1 inch , black screw full threaded 45 mm , chandras for polish , readymade tw flat batten , looking mirror , liquid varnish , mdf board , black screw full threaded 75 mm , paint enamel black in 1 ltr pack container , looking mirror 5mm thick for dressing table ladies , black screw full threaded 35mm , readymade tw legs for table peg , black screw full threaded 65 mm , black screw full threaded 15 mm , black screw full threaded 50 mm , paint enamel red oxide , pegs aluminum 100 mm , knob decorative acrylic , mdf board , readymade timber seat back support rails , pegs aluminum 125 mm , cloth abrasive no 80 , plain mdf board one side teak face other side lamination , plywood bwr gde as per is 303 , black screw full threaded 25 mm , plain mdf board both side colour teak face lamination , butt hinges ms 75 mm , pencil carpenter 10 nos in each pkt , file triangular 6 inch , plastic laminated sheet white colour , plywood case one side teak face , ply wood , cloth abrasive no 100 , ply wood , nails wire 50 mm no 14 , nails wire 65 mm no 14 , plastic laminated sheet 1 mm thick , paint black japan , ss hasp and stapple 125 mm , nails wire 15 mm no 20 , nails wire 60 mm no 14 , plywood , piano type hinges long stainless steel , ss door handle 100 mm , nails wire 100 mm no 14 , nails wire 35 mm no 17 , ss hasp and staple 75 mm , hasp & stapple aluminum anodized , ss hasp and stapple 100 mm , nails wire 20 mm no 20 , nails wire 40 mm no 14 , brush painting 100 mm , nails wire 75 mm no 14 , nails wire 32 mm no 17 , hdhmr board , nails wire 25 mm no 17 , brush painting 75 mm , brush painting 50 mm , telescopic channel , pvc beading

CTN :45010989

01 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras bid to ras supply of channel mild steel 250x82x9x14 1 mm , un equal alu alloy angle bar 150x100x10mm l 4000mm , steel channels 3 x 1-1 2 x 1-1 2 x 3 16 , channel ms 150x75x5 4 x 9 mm , steel angle equal mild 100mm x 100mm 8 mm , alu alloy angle bar 50x 50x 5mm l 5000mm , alu alloy angle bar 75 x 75 x 10mm l 4000mm or above , ms angle 90mm x 90mm x 10mm , angles equal ms 55x 55x 6mm , channel mild steel 175 x 7 5 x 10 2 mm , alu alloy angle bar 100 x 100 x 10mm l 4000mm , alu alloy angle bar 75 x 75 x 6 mm l 4000mm or above , angles equal ms 100 x 100 x 10 mm , ms channel 100 mm x 50 mm x 4 7 mm web x 7 5 mm flan , angles equal ms 65 x 65 x 6 mm

corporations/Associations/Others

CTN :45431388

08 Jul, 2026 1.51 Crore

Jodhpur - Rajasthan

Tender For corrigendum : 1.4 m long m.s. channel bracket with clamp - supply of 1.4 m long m.s. channel bracket with clamp as per tender specifications tn-2155

Ms Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others