Latest ms channel Tenders | Government ms channel Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

corporations/Associations/Others

CTN :45484654

02 Jul, 2026 17.30 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of ms flat size width 50mm thickness 06mm , 1309 hsm plate is 2062 10x1500x6300 mm , hr plate 6mm 250 grade is2062e250br , hr plate 3.15mm 250 grade is2062e250br , plate pmis 12mm , 1307 channel ismc 100 100x50x5 mm , 1307 channel ismc 125 125x65x5.30 mm , 1307 ms channel 200x75 mm

CTN :45737309

10 Jul, 2026 NA

Jamshedpur - Jharkhand

Tender For set of safety bracket assembly of bp and fp end cocks for wag 9/wap-7 locomotives consisting of two items-- (i) ms plate for bracket assembly of bp and fp end cocks for wag-9/wap-7 loco s as per s.c. rly. drg. no.- c/els/lgd/ex.ftg/4/25 material: ms as per ls: 2062. note: thickness of the plate is 20mm instead of 16mm. qty.= 01 no. & (ii) ms channel of size 150 x 75 x 6 (430 mm long) al ong with ms plate of size 150 x 75 x 16 mm i.e. ms plate (ref: 2) to be welded to the channel (ref:1) a t one end as per s. c. railway drg. no.- c/els/lgd/ex.ftg/3/12 (alt.-1), reference no.- 1 & 2 qty.= 02 nos. (1 set= 2 items in 3 nos.) (04 set of sample to be got approved before bulk supply of material). [ warranty period: 30 months after the date of delivery ] ]

CTN :45010989

01 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras bid to ras supply of channel mild steel 250x82x9x14 1 mm , un equal alu alloy angle bar 150x100x10mm l 4000mm , steel channels 3 x 1-1 2 x 1-1 2 x 3 16 , channel ms 150x75x5 4 x 9 mm , steel angle equal mild 100mm x 100mm 8 mm , alu alloy angle bar 50x 50x 5mm l 5000mm , alu alloy angle bar 75 x 75 x 10mm l 4000mm or above , ms angle 90mm x 90mm x 10mm , angles equal ms 55x 55x 6mm , channel mild steel 175 x 7 5 x 10 2 mm , alu alloy angle bar 100 x 100 x 10mm l 4000mm , alu alloy angle bar 75 x 75 x 6 mm l 4000mm or above , angles equal ms 100 x 100 x 10 mm , ms channel 100 mm x 50 mm x 4 7 mm web x 7 5 mm flan , angles equal ms 65 x 65 x 6 mm

corporations/Associations/Others

CTN :45431388

08 Jul, 2026 1.51 Crore

Jodhpur - Rajasthan

Tender For corrigendum : 1.4 m long m.s. channel bracket with clamp - supply of 1.4 m long m.s. channel bracket with clamp as per tender specifications tn-2155

State Government

CTN :45673748

08 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply delivery installation and commissioning of 10 nos of 1.5 tonne capacity 5 star split air conditioner units with accessories to be installed at hostel building in training centre - supply, delivery, installation and commissioning of following materials., supply and fixing of 1.5 tr 5 star split type ac unit, supply and fixing of double booster voltage stabilizer - 4kva, supply and fixing of ms stand for fixing out door unit, supply fabrication and fixing of ms channel for mounting the air conditiong outdoor unit, supply and laying of 5/8" and 3/8" copper pipe (extra beyond 3 meters supplied with ac unit), sub total (excluding gst), gst @18%

CTN :45709294

30 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For ms beam and ms channel

CTN :45678941

10 Jul, 2026 4.25 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of ms angle 1 , ms angle 2 , ms angle 3 , ms channel 1 , ms channel 2 , ms channel 3 , ms channel 4 , m.s. square , m.s plate

CTN :45693782

13 Jul, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Ms Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government