Latest ms plates Tenders | Government ms plates Tenders

Central Government/Public Sector

CTN :45531590

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms structure consisting of angle, girder, ms gate, filter tank, iron battery boxes, ms plates,tie bar fencing, loose tie bar, ms jali,ms water tank ,pipe structure, heavy blower,rail trolly wheel ,empty stater,crane structure ,shutter ms gate, empty rru and empty pannel structure,ms saria,gate boom,pipes,protective screen fob's and rob's and all type heavy structure similar items with or without undetchable ms ci and nf attachment intact. note - cutting allowed for easy loading only.note-while delivery if any other non-ferrous or non-similar items found in the lot will not be delivered. no pick and chose allowed.qty. on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45525191

15 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of replacement/repair of eroded ms plates, bracing pipe, ms angles, channels, beams of aph outlet flue gas duct in unit-8, cstps during aoh.

Central Government And Public Sector

CTN :44713698

15 Jun, 2026 NA

Angul - Odisha

Tender For bid to ras tender for supply of ms plates 1000073689 : : -detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i

CTN :45458931

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, chain, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap. location: - south ¿ west side of erwb. in area i. lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

Central Government/Public Sector

CTN :45433000

25 Jun, 2026 3.25 Lacs

Nowrozabad - Madhya Pradesh

Tender For supply of hss plain chaser, size 4 x1/3/64 , (one pack/set includes 04 pieces) , punch (hot die steel) suitable for 22mm hole diameter, round head, suitable for 10mm thick ms plates , hss shear and cutting blade as per drawing, approx. length 300mm , hss thread chaser, 10tpi, size 4 x1/3/64 (one pack/set includes 04 pieces)

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45419223

18 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of caliper harmafrodaite , chisel cold flat , hexa frame fixed type , safety goggles , straight ede , stud extrecter , verneir caliper , marking table , portable hand drill machine electric type , drill twist taper shank , file round second cut , file trungular second cut , file flate second cut t safe edge , file half round second basterd , file round secont bastard , file carad wire brush , wooden handal soldring iron copper bit , blow lamp , inter chegeable ratchet socket set , double ended tublare box spanner set with tomm bar , clamp toolmaker , hand reamer set taper pin straught fiute , machine remerr prallel helical fiute , chisel cold crosscut and diamond point , adjustable pipe die set bsp , wheel dresser star dresser with holder , machine vice swivel base , locker with 8 drawer , metal rack , machine vice , wing compass , hand hammar with handle , torque wrench standard ratchet , power tools for fastninig , different profile gauge plate type , indexable boribar with inserts , tempreature gauge , dowel pin starigut , standard tap screw , lapping plate , meduam carboon heat trated alloy steel metric stand , capsscrew , drill gauge , cast iron valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip on forge steel flange , bolt nut with washer , pully for flat belt , steel keys , packing gasket , washer cluth key jib cotter and cirlip , drill drift , bearing different type , lifting sling , bearing extactor , pully extractor , flat headed hammer with handel , planishshing hammer , snip bent left cut , gauge snape go and not go , gauge pluge , gauge telescopic set , dial vernier cliper universal , depth micrometer , digital micrometer outside , comparator gauge dial indiate with stand and vracket , enggineering try squar , surface roughnes comerission plate , pipe bender machine , pedastel type grinding machine , hexa frame wing nut , file square secound cut , file flat bastard , stake grooving //bid details 2 / 56

Central Government/Public Sector

CTN :44719278

04 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras bid to ras supply of ms plates 1200 mm dia 12 mm thick,ms plates 1050 mm dia 12 mm thick,ms plates 12 m thick 830 mm dia,ms plates 12 mm thick 680 mm dia

corporations/Associations/Others

CTN :45375456

08 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of mild steel products - ms plates 6mm and 8mm is 2062 grade b with test certificate - supply of ms plates is 2062 grade b with test certificate., m.s. plate is 2062 grade b, size (6.3 x 1.5 or 1.25 x 8 mm), m.s. plate is 2062 grade b, size (6.3 x 1.5 or 1.25 x 6 mm)

State Government

CTN :45377341

20 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-nshes- supply of certain tools and plants material at nshes, nagarjuna sagar.- surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 yes, master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 yes, hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 yes, feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s yes, barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) yes, hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re yes, grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 yes, hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 yes, cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h yes, corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 yes, crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 yes, bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia yes, 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g yes, motorised barrel pump 0.5 hp, 350 watts / single phasein built on- off switchmaximum discharge flow: 60-70 lpm, discharge pressure: 10 m water columnsuitable for 200-210 ltr barrel /50 ltr cansmaterial: stainless steel 316, pump tube length: 1250 mmsuction tube size: 44 mm diasuction tube length: 1250 mm, outlet size: 1 inch dia motorised barrel pump 0.5 hp, 350 watts / single phase in built on- off switch maximum discharge flow: 60-70 lpm, discharge pressure: 10 m water column suitable for 200-210 ltr barrel /50 ltr cans material: stainless steel 316, pump tube length: 1250 mm suction tube size: 44 mm dia suction tube lengt

Ms Plates Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors