Get complete information related to latest Organic Solvent Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Organic Solvent Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Organic Solvent Tenders.
Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get
Tender For painting and aluminium partition works inside the thermal battery building, ecil, hyderabad. - dismantling the existing ms partitions, removing white or colour wash, applying water thinnable cement primer, 1mm thick white cement putty, acrylic emulsion- two coats, painting with enamel paint on old work, sl of mineral fibre false ceiling tiles, providing mineral fibre false ceiling, aluminium work, powder coated al.-for shutters of doors, wood and pvc works, glazing-glass panes of 5mm thickness, providing etching on float glass, providingfixing aluminium handles125 mm, al. tower bolts anodised, bright finish brass 100mm latch,lock, al. hydraulic door closer-2x speedadjust, 1st quality acrylic distemper,acrylic smooth exterior paint, dismantling aluminium/ gypsum partitions.
Tender For providing of certain items for the sports arena in serilingampally circle-49, slp zone cmc - supply, fabrication, and fixing of prefabricated container-type of size 4.2mx 2.4m x 2.4m height, including complete with all required civil works including foundation, electrical, and plumbing works. the unit shall be made with a structural steel frame using is-standard square/rectangular tubes, externally cladded with 1-1.2 mm corrugated gl sheets with anti-corrosive paint, and internally lined with 8-12 mm cement board/laminated board panels including thermal insulation. the flooring shall consist of 18mm waterproof board with vinyl/ceramic tile finish complete for finished item of work as directed by the engineer-in-charge. installation including cost and conveyance of all materials and all labour charges, fixing charges, transportation etc. , supply and fixing of hexagonal frp ornamental gazebo with bench-outer dimension 18 feet 3-inch ms box pipe structure supported columns and clod with frp ms rafter, seating bench and railing cladding for columns and roof made up of frp. the item is finished with aspa colour and polish including transportation etc., complete , providing, supplying and laying 80 mm thick heavy duty aracon flooring blocks/pavers of approved colour, design and pattern over prepared surface including laying in proper line, level and slope, with 20-25 mm thick bedding sand layer, cutting to edges, filling joints with fine sand, compaction with plate compactor, watering, cleaning and finishing.complete as directed by engineer-in-charge.
Tender For annual maintenance & supply of materials, plumbers, carpentors to jmfc court hall, k r puram from august-2026 to july-2027- item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of engineer-in- charge. , item description: cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150mm dia upto 300mm , item description: cleaning seftic tank of 100 users capacity as per details and instructions. (while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : white solid plastic seat with lid , item description: providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour. - 20 mm nominal bore, weighing not less than 40 g , item description: providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour. - 25mm nominal bore, weighing not less than 62 g , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 45 cm length - 20 mm nominal bore , item description: providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-coloured , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m s
Tender For supply of lab chemical d d - basic lead sub acetate , organicsolvent , bromo thymol blue powder , conc sulphuric acid , conc hydrochloric acid , sodium hydroxide , phosphoric acid , potasium per magnet , dextrose glucose pure , commercial hydrochloric acid , brix hydrometer 0 bata 10 , brix hydrometer 10 bata 20 , tharmameter 0 bata 120 centrigrate , universal indicator bata 500 ml , thymol blue bata 100 ml , buffer solution 500 ml , fehling a solution 500 ml , fehling b solution 500 ml , p h indicator paper , electronic weighing scale 500 gram , beaker 100 ml , conical flask 250 ml , test tube small , test tube big , test tube stand , plastic bucket 7 point 5 ltr , filter paper 18 point 5 cm q , knife of rapipol extractor per set , wattman filter paper 46x57 , alumnium mug 250 ml , plastic bata steel small dise , oven , muricuric chloride , plastic cylinder 100 ml , plastic cylinder 500 ml , plastic cylinder 1000 ml , meashuring flask 250 ml
Tender For supply of supply of three fourth inch ss 304 swm gasket , supply of 1 inch ss 304 swm gasket , supply of 3 inch ss 304 swm gasket , supply of 4 inch ss 304 swm gasket , supply of 6 inch ss 304 swm gasket , supply of 8 inch ss 304 swm gasket , supply of 10 inch ss 304 swm gasket , supply of 12 inch ss 304 swm gasket , supply of 16 inch ss 304 swm gasket , supply of 18 inch ss 304 swm gasket , supply of 20 inch ss 304 swm gasket , supply of 24 inch ss 304 swm gasket , supply of studs and nuts m14 x 75 mm ht , supply of studs and nuts m16 x 100 mm ht , supply of studs and nuts m20 x 120 mm ht , supply of studs and nuts m22 x 120 mm ht , supply of welding electrodes e6013 , supply of pressure gauge 0 to 16 kg per cm2 , supply of pressure gauge 0 to 21 kg per cm2 , supply of thermal safety valve tsv , supply of strainer filter 4 inch , supply of strainer filter 6 inch , supply of strainer filter 8 inch , supply of bearing 7313 skf lnt , supply of bearing 6308 skf lnt , supply of bearing 6307 skf lnt , supply of bearing 7307b skf lnt , supply of bearing 7307b spare , supply of bearing 7313 becbj , supply of bearing 7314 becbj , supply of gi reducer 2 inch x 1 inch , supply of thinner 844 , supply of zinc silicate primer , supply of protecto mastic primer , supply of pu paint , supply of enamel paint , supply of paint remover , supply of paint brush , supply of paint roller , supply of beading u type , supply of beading s type , supply of ptfe sealing tape , supply of white waste cloth , supply of tata safari tubeless tyre , supply of grinding wheel , supply of cutting wheel , supply of buffing wheel , supply of 3 inch ms sorf flange , supply of 4 inch ms sorf flange , supply of 3 inch ms blrf flange , supply of 4 inch ms blrf flange , supply of 1 inch upvc pipe , supply of 1 inch upvc socket , supply of 1 inch upvc elbow , supply of 1 inch upvc union , supply of 2 inch upvc pipe , supply of 2 inch upvc socket , supply of 2 inch upvc elbow , supply of 2 inch upvc union , supply of 2 inch x 1 inch upvc reducer , supply of 1.25 inch foam pickup tube , supply of half inch foam pickup tube , supply of wrapping coating , supply of silica gel , supply of concertina coil , supply of earthing strip 50x6 mm , supply of earthing strip 25x3 mm , supply of nitrogen cylinder , supply of ss worm gear , supply of hose box glass 330x330 mm , supply of ss nut and bolt m10 to m17
Tender For chemical & thermal resistant epoxy enamel dark grey paint shade no. 632 of is: 5 to cps-aa 56131/ rev. , epoxide finishing paint light grey. with catalist shade 631 as per cps-aa56131/rev. 07 in 4 ltr. pack , epoxide priming paints as per cps- aa56105/rev. 07 in 15+ 5 ltr. packing.
Tender For - r/ mtc. of rws/jjm schemes/ s.h.: providing & fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under hrishyamukh rd block under dws sub-division, belonia during the year 2026-27. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing stee
Tender For supply of s ss304l 3inch pipe sch 40 , s ss304l 1inch pipe sch 40 , s ss304l tube 3by8 inch sch 80 , s ss wn flange 3 inch class 150 , s ss wn flange 1 inch class 150 , s ss wn flange 3by4 inch class 150 , s ss blind flange 3 inch , s ss blind flange 1 inch , s ss elbow 3inch 90 deg astm a 403 seamless , s ss elbow 1inch 90 deg astm a 403 seamless , s ss equal tee 3inch astm a 403 grade wpb seamless , s ss equal tee 1inch astm a 403 grade wpb seamless , s ss reducer 3inchx2inch astm a 403 grade wpb seamless , s ss reducer 3inchx 1.5inch astm a 403 grade wpb seamless , s ss reducer 3inchx 1inch astm a 403 grade wpb seamless , s ss nipple 1inch , s ss dust cap 1inch with ss chain 100 mm length , s ss dust cap 3by4inch with ss chain 100 mm length , sandi ball valve 3inch , sandi ball valve 1inch , sandi ball valve 3by4inch , sandi spring return valve 1 inch , sandi nrv 3inch , sandi y type strainer 3 inch , sandi basket type strainer 3 inch , laying of pipes , welding of pipes , hydrotesting of ss pipe ntw , sanda blasting and primer coat , sanda int 1 and fin 2 paint coating , blasting and coal tar epoxy coat , blasting and internal epoxy coat jet a1 , sitc aodd pump , s metallic gaskets , s neoprene gaskets , s ss piping stud bolts and nuts , s copper jumpers , supply of pipe ms 25mm , laying of pipe ms 25 mm , supply of pipe ss 25mm , laying of pipe ss 25 mm , sandi ss flange 25 mm , sandi ms flange 25 mm , sandi ms flange 50 mm , sandi 25 mm tee , sandi elbow 25 mm , sandi reducer 50mm to 25mm , sandi nrv 25 mm flanged ends , sandi gate valve 25 mm flanged , sandi thermal safety relief valve 25mm * /bid number : gem/2026/b/7681214 + /dated: 18-06-2026 ' ' / bid document 1 / 36
Tender For supply of spare- anabond red (175 gm) part no nk, araldite 175 gm part no nk, cloth emery - 120 part no nk, cloth emery - 180 part no nk, cloth emery - 60 part no nk, cloth malmal part no nk, cloth white muslin part no h28305000243, cotton waste part no nk, electrod (e 900) 4 mm part no 3439000147, electrode ms 4mm part no nk, electrodes welding ms gp 2.50 mm part no g23439000016, halide sheet 0.5 mm part no nk, halide sheet 1 mm part no nk, hinges part no nk, hollow pipe 12 mm part no nk, insulation tape part no nk, iron rod 8 mm part no nk, lt wire 2.5 sq mm part no nk, m seal part no h18010000084, muskin tape 2 "/3" inch part no nk, paint aluminium (silver) 1/2 ltr part no h18010000114, paint red oxide part no h18010000110, paint rfu og part no hi8010007499, paint syn enamel black part no h18010007482, paint syn enamel blue part no nk, plastic tag part no nk, rust cleaner(zorrik 180 gm) part no nk, sodium hydroxide(caustic soda) part no h18040000019, solder soft 40-60(200grm=1pkt) part no nk, steel 40c8 r/bar dia 20 mm to is : 1570 part no nk, strap 2" part no nk, thermal sleeve 8 mm part no nk, thinner part no nk, thread tape part no nk, welding electrode cast iron 3.15mm e 115 part no nk, welding electrode ms dia 3.15 mm part no nk