Latest square bars Tenders | Government square bars Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

State Government

CTN :45690582

15 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of glassware items - beaker , beaker , boiling tube class a , boropure cellulose nitrate membrane , bottle top dispensers , bulb pipettes class a , bulb pipettes class a , bulb pipettes class a , bulb pipettes class a , china dishes , conical flask , cover glass , crystallizing dishes , drying trays , erlenmeyer conical flask , filter paper whatman grade 1 , flat bottom evaporating dishes , flat bottom evaporating dishes , flat bottom flask , glass dishes , glass filter funnel , glass mortar and pestle , glass rods , magnetic stirrer bar , magnetic stirrer bar , magnetic stirrer bar , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , microscope glass slides , pipette graduated class a , pipette graduated class a , pipette graduated class a , pipette controller , pyknometer class a , reagent bottles wide mouth , reagent bottles with glass stopper , reagent bottles with glass stopper , reagent bottles with glass stopper , round bottom flask , s line petri dishes , separating funnel , pear shape , single channel variable vol pipette , spare extractor 100ml , specific gravity bottle , test tubes , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , variable micropipette , variable micropipette , variable micropipette , viscometer college pattern , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , watch glasses , beaker 1000ml , beaker 250ml , beaker 500ml , burette with staright bore glass key stopocok 25ml , burette with staright bore glass key stopocok 50ml , capillary tubes tlc 100mm , chemical thermometer , co-agulated tube melting point tube , college pattern center support pack of02 , concave lens , concave mirror , convex lens , cover slip , crystallizing dish with spout , distillation apparatus , dropping bottle 125ml , dropping bottle 125ml 12 pk , flask flat bottom single neck 250ml , flask volumetric 100ml , flas volumetric 50ml , flas volumetric250ml , flask flat bottom single neck cap 100ml , flask round bottom single neck cap 250ml , flask volumetric 500ml , flassk round bottom single neck cap 100ml , gas genearator kipps with ground glass joint 500ml , glass desiccators plain 210mm , glass dropper 6 , glass rod , glass stopper size 19 , graduated cylinder 100ml , graduated cylinder 10ml , magnifying glass with led , measuring cylinder 50ml , measuring cylinder 100ml , measuring cylinder 10ml , measuring cylinder 250ml , measuring cylinder 500ml , melting point tube , micro scale ocular micrometer , micro slide , micro slide , micro slide , optical prism , ostwald standdard size viscometers , ostwald viscometer , petridishes plain , petridishes plain , pipette , pipette , pipette , reagent bottle , reagent bottle , reagent bottle , reagent bottle , reagent sprayer for tlc 100ml , separating funnel 100ml , separating funnel 125ml , separating funnel 250ml , soxhlet extraction appratus 200ml , stopper hollow hexagonal head con size , test tube with rim 15ml , test tube 15ml , thermometer , thermometerchemical , thiele tube pack of 06 , thieles tube , volumetric flask 50ml with stoper , volumetric flask , volumetric flask , watch glasses , weighing bbottle tall form cap 60ml

CTN :45648793

02 Jul, 2026 NA

Agra - Uttar Pradesh

Tender For supply of mild steel round rod 16mm , brass rod free cutting round hexagonal af 19mm , stainless steel spring wire 1 point 6 , steel ball 11 point 10 mm dia round , steel bar carbon finished bright round 80mm dia , steel spring wire 12 swg , oxidising salt black , polythene moldng powder hd black , potassium cyanide for industry use , nitrile rubber compound nt2 irhd 45 to 50

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

corporations/Associations/Others

CTN :45661832

02 Jul, 2026 1.87 Lacs

Kolkata - West Bengal

Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. square bars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%

CTN :45408230

20 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of 0.50 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long //bid details 2 / 47

CTN :45420683

22 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of galvatume aluminium zinc coating gi based corrugated steel sheet 0.80 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 //bid details 2 / 47 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long

CTN :45408207

18 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of amn bkr inf 30 mt 2615 - 0.50 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long //bid details 2 / 47

State Government

CTN :45593106

17 Jul, 2026 2.61 Crore

Delhi - Delhi

Tender For supply of to cooler part no c88709 make kbi , pipe oil control unit to swivelt fitting make kbi , angle screw fitting output from housing make kbi , compressed air pipe part no c66686 make kbi , screw fitting pressure switch part no c57324 by5 make kbi , angle screw fitting pressure switch make kbi , pipe housing to relief valve make kbi , angle screw fitting relief valve make kbi , screw plug g3 by8a compressor housing make kbi , screw plug g3 by4a compressor housing make kbi , protective grating part no c63211 make kbi , bracket two point mounting make kbi , bracket single point mounting make kbi , stud m10x25 resilient mounting make kbi , angle main air compressor make kbi , motor hub part no b91651 make kbi , setscrew m8x20 motor hub make kbi , cover dry type air filter make kbi , vane ring part no 8 000 8 923 720 4 make kbi , hexagonal nut dry type air filter make kbi , dust dischar valve part no 8 000 8 460 702 4 make kbi , air filter bracket part no ii41935 make kbi , holder dry type air filter part no c81101 make kbi , hose dry type air filter part no c70318 by2 make kbi , hose clamp dry type air filter make kbi , clamp part no c81114 by1 make kbi , electrical installation part no ii49776 make kbi , support part no ii14502 make kbi , temperature switch part no ii49742 by03 make kbi , closing parts part no i89979 by02 make kbi , washer 17 part no 450682 make kbi , rain hood part no b79455 by2 make kbi , elctromecanica part no stn3499 make kbi , connector for cab pneumatic valve 01008260 , duplex piston valve oem part no ii80663 oem kbi , anti skid valve gv 18 2 make kbi , check valve g3 by4 kb partno ii2556 make kbi , magnet valve part no i82554 by1110 make kbi , magnet valve wmv01 by5zg for rs 1 make kbi , l0wer guide rail assy left for saloon , air dryer unit byrs10 make kbi , main air compressor conditional oh kit for rs 3 make kbi , pressure reducing valve dmv 7 by7 5 make kbi , safety valve 15 bar part no ii40143 by8150 make kbi , lad03a card for becu byrs10 make kbi , kit for brake hanger byrs 1 make-kbi connecting cable (for anti skid valve) make-kbi(part no n62148/01500), magnet valve of anti-skid valve make-kbi (part no.- ii31211/024), compressor housing. part no: ii44824 make: kbi, minimum pressure valve. part no: ii44692 make: kbi, scavenge pipe part no: c64985 make: kbi., screw plug g1/8a,part no:456475,make:kbi, screw plug g1/4a,part no:451540,make:kbi, hexagonal nut m8 scavenge pipe. part no.465509 make: kbi, hexagonal nut m12 housing head. part no.452187 make: kbi, o- ring thermostat stopper. part no :b89188, make: kbi, stopper, part no: b89189, make: kbi., o-ring oil control block. part no:889193, make: kbi, stud m8x30 oil control unit. part no:451435,make: kbi, hexagonal nut m8 oil control block. part no. 465687,make-kbi , screw plug g3/8a oil control block. part no:461588, make: kbi, adapter dome,part no:c66218,make:kbi, gasket of main air compressor/rs3/rs9. part no.- b89159 make : kbi, screw fitting,part no:c59093/1, make:kbi, oil pipe-relief valve to compressor-block part no:ii33598, make: kbi, scroll casing,part no:i92325/03,make:kbi, admission ring,part no:b90701,make:kbi, cooler cowl,part no:ii43792,make: kbi, adapter housing,part no:ii45153,make:kbi, reducing union compressor safety valve. part no: //bid details 2 / 79

Square Bars Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government