Latest turbine pump Tenders | Government turbine pump Tenders

CTN :45740717

27 Jul, 2026 74.98 Lacs

Sangli - Maharashtra

Tender For providing, erecting, commissioning and giving satisfactory test and trial of 250 hp vertical turbine pumps and allied mechanical and electrical equipments for pumping raw water form jackwellat krishna ghat to water treatment plant at miraj

CTN :45740735

27 Jul, 2026 2.32 Crore

Sangli - Maharashtra

Tender For providing, installing,commissioning vertial turbine pump 2 nos at karnal road jackwell, sangli

CTN :45732495

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of high flow pump spares spares for high flow progressive cavity pumps , , model no:- rbh - 8180 aabn (pump size :- 8" x 8") for a.h pump , model no:- pslh 8170 aabn pump sizes:- 8" x 8" (for sugar melter) , model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h,(cl molasses pumps 02 nos) , model no:- pslh 6160 pump sizes:- 6" x 6" (for a.l. & f.m molasses pumps) , model no:- pslh 4150 pump sizes:- 4" x 4" (for (c 1) molasses , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , spares for high flow progressive cavity pump make:-risansi industries ltd. model no. :- rbh 8180 aabn pump sizes :- 8" x 8" (for a.h pumps of centrifugal station) , s.s rotor , shaft head , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , rubber boot , protector , circlip , spares for high flow progressive cavity pump make:-risansi industries ltd. model no :- rboh ag 6160 pump sizes :- 8" x 8" (for sugar melter , b.h & c.l. pumps) , s.s rotor , sleeve ring , pin , head pin , rubber boot , s.s sleeve , shaft head , circlip , protector , connecting rod , seal ring , bush , spares for high flow progressive cavity pump (pslh 6160) make:- risansi industries ltd. pump sizes :- 6" x 6" (for a.l. & f.m molasses pumps) , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , protector , circlip , sleeve ring , shaft head , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- pslh 4150 aabn pump sizes :- 4" x 4" for (c1) molasses , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , shaft head , sleeve ring , bush , connecting rod , circlip , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , s.s sleeve , seal ring , spares for high flow progressive cavity pump make:- risansi industries ltd. model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h, (c.l molasses pumps 02 nos) , s.s rotor , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , bush , rubber boot , protector , circlip , spares for high flow progressive cavity pump model:- aip 4050 s make:- akanshi industries pump sizes :- 4" x 4" , rubber stator , rubber seal ring , spares for high flow progressive cavity pump model:- aip 6060 s make:- akanshi industries pump sizes :-6" x 6" for f.m. pumps , rubber stator , coupling rod , shaft head , pin , rubber boot seal , rubber seal ring , rubber sleeve ring , bush , s.s rotor , circlip lock , c.i. 3 groove v-belt pulley section-c with pilot bore , od = 305 mm , od = 380 mm , od = 450 mm

CTN :45655784

06 Jul, 2026 NA

Karnal - Haryana

Tender For rubberitems - rubber items, rubber part}rubber o ring for continuous machine size=od 151mm, id 147mm, thic 03 mm(rs0133)manuficture dealer certificat necessary, rubber part}rubber o ring for continuous machine size=od 262 mm, id 248 mm, thic 06 mm(rs0132)manuficture dealer certificat necessary, rubber part}rubber o ring for continuous machine, size=od 112mm, id 100mm, thic 06 mm(rs0131)manuficture dealer certificat necessary, {rubber part}rubber o ring for continuous machine, size=od 282mm, id 272mm, thic 05 mm.(rs0134)manuficture dealer certificat necessary, {{rubber part}rubber o ring for continuous machine, size=od 282mm, id 272mm, thic 05 mm.(rs0134)manuficture dealer certificat necessary, rubber part}rubber bush dholak type for roto pump gear coupling motor side(rb0129)manuficture dealer certificat necessary, rubber part}rubber spacer sw-150(rb0140)manuficture dealer certificat necessary 532, centrifugal store a/c}epdm rubber seat for 200 mm butterfly valve having actuator fitted for raw batch c/f machine 1750 kg/cm2(cf0012)manufacture deler certificate necessary, rubber part}epdm rubber seat for 250mm butterfly valve heaving actuator fitting make: valcraft engineer(rs0037)manufacture deler certificate necessary, centrifugal store a/c}epdm rubber seat of 150 mm butterfly valve having actuator fitted for refinery batch c/f machine 1250 kg/cm2.(cf0020)manufacture deler certificate necessary, rubber part}rubber seal kit for penumatic actuator for 300mm butterfly valve make: valcraft engineer(rs0003)manufacture deler certificate necessary, centrifugal store a/c}rubber seal kit for pnuematic plough discharge,model no.wb-1250 size fb 1350x1000 make : walchandnagar(rs0011)manufacture dealer certificate necessary, centrifugal store a/c}rubber seal kit for process control valve cylinder, size 25 nb for raw batch c/f machine 1750 kg/cm2(cf0011)manufacture dealer certificate necessary, centrifugal store a/c}rubber seal kit of brake pad cylinder for raw batch c/f machine 1750 kg/cm2.(cf0004), rubber part}rubber seal kit of plough in out cylinder for raw batch c/f machine 1750 kg/cm2.(cf0007), centrifugal store a/c}rubber seal kit of plough in out cylinder for refinery batch c/f machine 1250 kg/cm2.(cf0015)manufacture dealer certificate necessary, centrifugal store a/c}rubber seal kit of plough lock unlock cylinder for raw batch c/f machine 1750 kg/cm2(cf0010), centrifugal store a/c}rubber seal kit of plough lock unlock cylinder for refinery batch c/f machine 1250 kg/cm2.(cf0018)manufacture dealer certificate necessary, centrifugal store a/c}rubber seal kit of plough up down cylinder (external) for refinery batch c/f machine 1250 kg/cm2.(cf0016)manufacture dealer certificate necessary, centrifugal store a/c}rubber seal kit of plough up down cylinder (internal) for raw batch c/f machine 1750 kg/cm2(cf0008), centrifugal store a/c}rubber seal kit of plough up down cylinder(external) for raw batch c/f machine 1750 kg/cm2(cf0009), rubber part}seal kit for bottom valve cylinder(rs0020)manufacture dealer certificate necessary, centrifugal store a/c}seal kit for pneumatic actuator having 250 mm butterfly valve of refinery batch c/f machine 1250 kg/cm2.(cf0021)manufacture dealer certificate necessary 531, rubber part}epdm rubber seat for glob valve 155x20x20 mm(rs0109), rubber part}epdm rubber seat for right angle valve (1000mm)1050x850x25mm(rs0017), rubber part}epdm rubber seat for right angle valve 330x180x25mm(rs0018), rubber part}epdm rubber seat, bear temp 1500 c, make puri.size 400x280x25mm(rs0117), rubber part}epdm rubber seat, bear temp 1500 c, make puri.size 280x30x12mm(rs0119), rubber part}epdm rubber seat,bear temp 1500 c, make puri.size 1150x970x25mm(rs0116), rubber part}rubber cord for juice heater size 13x16x17mm(pk0056)manifacture dealer certificate necessary (536), rubber part}rubber cord for juice heater size 15x15x12mm(pk0027), rubber part}rubber seat 290x175x15mm(rs0074), rubber part}rubber seat 500x370x25mm(rs0071), rubber

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

State Government

CTN :45646140

07 Jul, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .

CTN :45630058

04 Jul, 2026 33.14 Lacs

Chittoor - Andhra Pradesh

Tender For supply and delivery of various stages (03 nos) submersible motor with suitable starter at kakavedu in ward no.02, (10 nos) 5hp submersible motor with suitable starter at a) rasappa colony in ward no.05, b) ngaari d/w in ward no. 06, c) netham st colony in ward no.09, d) prakash nagar ward no.15, (01 no) 40hp vertical turbine pump motor at ss tank and (20 nos) 7.5hp submersible motor with suitable starter, materials at a) ntr nagar in ward no.13, b) ekm kamaraja street in ward no. 14, c) karakantapuram d/w in ward no.17, d) sathrawada sc colony in ward no.20, e)sanjivee nagar in ward no.24, f) gandala street in ward no.26, chinthalapatteda d/w in ward no.27 g) raja street chinthalapatteda in ward no.28, h) chakala street in ward no.29 in nagari municipality

CTN :45608581

06 Jul, 2026 10.00 Lacs

Mandala - Madhya Pradesh

Tender For - supply for 60 hp 3 stage vt turbine pump bowl assembly capable to discharge 335 m3/hrat head 30 meter existing 250x39 mm dia complete, bowl bearing bronze, pump impeller shaft, line shaft and other material at nagr palika parisad mandla dist.mandla (m.p.)

State Government

CTN :45600848

25 Jun, 2026 42.25 Lacs

Ranebennur - Karnataka

Tender For repair and replacement of faulty 11/6.6kv c, and servicing of 2mva transformer & 100kva anxillary transformers along with 2 nos of 650hp ht vertical turbine pump and other accessories of tiluvalli lift irrigation scheme in hangal taluk haveri district

Central Government/Public Sector

CTN :45354608

02 Jul, 2026 4.36 Crore

Angul - Odisha

Tender For corrigendum : supply of horizontal centrifugal pump sets 38 lps x 160 mtrs head with flp 550 volts electricals & accessories , vertical turbine pump set, 350 lps x 65 mtr head with 6.6 kv electricals & accessories , vertical turbine pump set, discharge: 270 lps, head: 62 mtrs, electricals: 6.6 kv electricals & acc , horizontal centrifugal pump sets 180 lps x 170 mtr head with 3.3kv electricals & accessories , horizontal centrifugal pump sets, 100 lps and 180 mtrs head with 3.3kv electricals and accessories , horizontal centrifugal pump set 75 lps x 80 mtrs. head with 415 volts electrical & accessories , horizontal centrifugal bare pump 160 lps x180 mtrs head & accessories without prime movers & starter , horizontal centrifugal pump set, 180lps x 200mtr head, 6.6kv electricals and accessories

Turbine Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector