Get complete information related to latest Valve Sluice Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Valve Sluice Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Valve Sluice Tenders.
Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluicevalves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.
Tender For supply of spare parts required for batch type centrifugal machine ng1250, nhec make i 1 inch water pneumatic vavle size - 25nb , spare parts required for batch type centrifugal machine ng-1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb , spare parts required for batch type centrifugal machine ng1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb, seal kit , spare parts required for batch type centrifugal machine ng-1250, nhec make i 1 inch water pneumatic valve spares make kushako, size 25nb, spring , batch type centrifugal machine spare parts ng1250 cf machine bearing sleeve with wedge type ring and with chucknut for batch type centrifugal machine ng1250, nhec mak , batch type centrifugal machine spare parts ng1250 cf machine wedge type ring taper one for a centrifugal machine ng1250, nhec make , spare parts for batch type centrifugl machine kb1750, thyssen krupp make poppet type pilot operated solenoid valve, make kushakorotex i 4 way double action solenoid valve , spare parts for batch type centrifugl machine kb1750, thyssen krupp make poppet type pilot operated solenoid valve, make kushakorotex i 3 upon 2 way single action solenoid valve. , spare parts for batch type centrifugl machine kb1750, thyssen krupp make bottom valve main discharge cylinder complete. heramb udyog make, model hubdvc rd 68
Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluicevalve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluicevalve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluicevalve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluicevalve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40
Tender For procurement of miscellaneous spares for mounting various actuators, solenoids, air limit switches, set of o-ring -- system ggsstp, ropar tender enquiry - grub screw with nut (ht) for mounting pd-28 actuator. size 10x40nim, nut bolt (ht) for mx-450 and cylinder body. size8x25 mm, dowel pin (ht for lock air cylinder assembly. size 10x50 mam, l-key bolt (cs) for air limit switch and cylinder. size 6x40mm., cylinder lock of esp and pd-15(cs). id-20mm and thickness imm, l-key bolt(cs) to lock the stopper of cylinder. size 6x30mm, actuator lock pd-28(cs), id-23mm and thickness-imm, actuator lock pd-50, pd-75 and cylinder lock of apη ducts(cs) id-33mm and thickness imm, l-key bolt for cylinder.6x40mm, screw with nut for mounting pressure switch. size(cs) 3x40mm., grub screw for mounting pd-50 & pd-75. size 12x50mm, nut-bolt(cs) for mounting electrical limit switch (4 to 7 fields). size 4x50mm., grub screw with nut (cs) for mounting electrical limit switches of pd-28, pd-50 & pd-75.size 4x25mm, nut bolt(cs) for mounting solenoids. suze 3x35mm, l-key bolt for air limit switch. size 3x40mm., l-key bolt(cs) for air limit switch. size 3x200mm, nut bolt (ht) for air limit switch. size 12x50mm., l-key bolt for air limit switch. size 4x35mm, l-key bolt(cs) for air limit switch. size 4x20mm, cylinder pin. drawing as perannexure-7, quick exhaust valve diaphragm of size 65mmdiameter thickness-2mm, material synthetic rubber, air limit switch o-ring of synthetic rubber., set consists of, size id-hom., thickness 2mm, 1.size: id = 1 , thickness 2mm, hsn code 40169320, screw with nutcs) 4x25 mm, nut-bolt (h.t) 12x25 for mounting mx-450, cylinder pin (160x250mm), drawing as per annex.-4, nut-bolt(h.t) 10x35 for coupling mx-450, l-key bolt(cs)(6x70mm) for poppet valve., diaphragm for quick exhaust valve diameter 6.5mm &thickness imm., cylinder spacer lock. drawing as per annex-2, stud for pd-28 mounting(10x12mm diameter-25 x40mm length(grub screw), stud(cs) for pd-50 and pd-75 mounting(12x14mm) diameter-10&75mm, stad gir pd-15 mounting(8x10mm) diameter-10x45mm length, hex nipple w(brass), hex nipple w"(ss), hex nipple "x3/4"(85), blow valve cup washer 100 nb drawing as per annex-6., blow valve disc 100 nb drawing as per annex-5, blow valve cup washer 50 nb. drawing as per annex.-1., blow valve disc 50 nb drawing as per annex.-3, stud with nun (cs) (8x35 mm) and overall 50mm length., vent filter sol viv top plate, drgas per annexure-8, solenoid valve rotex make" model 51400-6-20, solenoid valve repair kit
Tender For uws scheme 2025-26/ sh- providing installation, commissioning of 2 nos. 227 m3/h capacity,76 m head (total) clear water horizontal split casing centrifugal pumpset alongwith all accessories for wtp at dharmanagar 2025-26 - providing fitting fixing of 227 m3/hr capacity. 76 m head (total) clear water horizontal split casing centrifugal pump with bronze impeller, shaft (en 8), ss sleeve bush, flexible pin bush type coupling (kirloskar / wpil/grw / mather platt make) to be used with existing horizontal foot mounted squirel cage induction motor of capacity 100hp, 1500 rpm, horizontal (bch make) including all allied accessories complete in/c installation and commissioning and testing as per specification and direction of the engineer-in-charge(excluding suction /delivery pipe, foot valve. non return valve, sluicevalve, electrical panel board and other electrical accessories and civil works)
Tender For tender for supply of purchase of duncan bypass damper spares fgd : : - nrv , frl unit , flow control valve , quick exhaust valve , pnuematic cylinder , duncan make pilot operating valve(no) , duncan make pilot operating valve(nc) , duncan make pnuematic cylinder 8 , bypass damper sov avcon make , proximity sensor , ball valve , seal kit for duncan schrader make sov m , seal kit for duncan schrader make poppet