Arms And Ammunation Equipment Tenders

State Government

CTN :45732720

10 Jul, 2026 41.5 Thousand

Fatehabad - Haryana

Tender For haroli block: ratia panchayat: haroli dist.: fatehabad annual maintenance work for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing suitable floating arms with gi sheet.

Central Government/Public Sector

CTN :45727904

10 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of empty dissolved acetylene cylinder, type three piece welded, to is 7312 as per following technical requirement (1) water capacity: 41 ltrs ( +3% , - 0% ) ( 2) hydrostatic stretch test pressure : 53 kgf / sq.cm (3) pneumatic leakage test pressure : 40 kgf / sq.cm (4) maximum working pressure at 15 degree celcious - 16 kgf /sq. cm , (5) gas capacity 07 kgs (6) outer dia : 258 mm ,(7) inner dia : 250 mm (8) wall thickness (nominal : 04 mm (9) lengthwithout valve 960 mm ( approx.) porous monolithic calcium silicate (11) porosity 90 to 92 % (12) crushing strength (min) : 22 kgf / sq.cm. (13 ) solvent : acetone ch3coch3, (14) empty weight : 55 kgs. (15) valve confirm to is: 3224, (16)fusible plug as specified under gas cylinder rules 2004 & supported with manufacturers test certificate & certificate and approval from chief controller of explosives, govt. of india. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45732153

10 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of mechanical seal with outside balanced seal type, stainless steel springs, stainless steel rotating hardware, resin bonded carbon rotating face, sintered silicon carbide stationary seat, viton secondary seal and 2000 ppm of maximum total disolved solids suitable for armstrong make vertical pump 30hp/22kw, 1500rpm of manufacture code: c-ssc-ab2. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45430510

09 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : spn/b957-500-ll-mr-4090/181 loading arms (rail/road) for bina petchem and refinery expansion project (bprep) of m/s bharat petroleum corporation limited (bpcl)

Central Government And Public Sector

CTN :45732489

06 Jul, 2026 NA

Palakkad - Kerala

Tender For supply of explosive - booster charge, coloum charge and small dia charge

Central Government/Public Sector

CTN :45583381

03 Jul, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : base vehicle/chassis for explosive vehicle 3 tons , fabrication of body building for explosive vehicle 3 tons

State Government

CTN :45715574

14 Jul, 2026 NA

Dapodi - Maharashtra

Tender For requirement of stationery and cleaning material for barti office - a-4 size paper 75 gsm (500 pages), a-3 size paper 75 gsm (500 pages), a-5 copier paper 75 gsm - 500 sheets, legal size ledger paper 75 gsm (500 pages), a-4 size executive bond paper 150 gsm, glossy photo paper 180 gsm high - 50 sheets, file-regular flat file barti logo printed, spring file, big box file- file plastic coated, small box file ring file, notepad- steno 188 pages, spiral notepad 9” x 7” no.-8, 80 pages, notepad 9” x 7” no.-9, 48 pages (printed barti logo), notepad 9” x 7” no.-9, 100 pages (printed barti logo), notepad (conference) 9” x 7” 15 pages (printed barti logo), register legal size-01 quire, register legal size-02 quire, register legal size-05 quire, register legal size-06 quire, visitor's register size quire 12/768, stock book 10 quire, attendant register legal size-05 quire, plain envelope 100 gsm size: 241x108mm (9.5 x 4.25 inches), brown envelope 100 gsm size: 241x108mm (9.5 x 4.25 inches), window envelope 100 gsm size: 241x108mm (9.5 x 4.25 inches), brown window envelope 100 gsm size: 241x108mm (9.5 x 4.25 inches), white envelope a4 size 10x12, green clothlined envelope (regular cloth) a-4 size: 10 x 12 inches, white envelope-a-3 size 16 x 12, paper flag (1 packet)- three colored, paper flag (1 packet)- four colored, sticky notes pad 400 pages (multicolor), sticky note 76 mmx 76 mm, pen regular-blue, black, red, green (use & throw), pen refill, tri-max pen, tramax refill, uni ball pen-purple/ blue, uni-ball air 0.5mm roller ball pen, parker frontier roller ball pen, hitech v-5 pen 0.5mm, sketch pen packet multi color 12 colour, stamp pad, self ink stamp, stamp ink 20ml, brown tixo tape-1” x 65” mitrs, brown tixo tape- 2” x 65” mitrs, blue tixo tape-1” x 65” mitrs, blue tixo tape-2” x 65” mitrs, transparent cello tape 1/2"inch, 50 meter., tixo adhesive tape-(transparent 1/2) 1” x 65” mitrs, tixo adhesive tape-(transparent 1/2) 2” x 65” mitrs, foam tape 1inch”, foam tape 2inch”, acrylic transparent double side gum tape 10 mm x 7 meter tape, gum bottle-300 ml (camel), glue stick 8gm, glue stick 25g, fevi quick, fevicol 100ml bottle, binder spring clip (box) 15 mm 12pcs, binder spring clip (box) 19 mm 12pcs, binder spring clip (box) 25 mm 12pcs, binder spring clip (box) 32 mm 12pcs, binder spring clip (box) 41 mm 12pcs, binder spring clip (box) 51 mm 12pcs, music 555 streamline clips, 35 mm packaging size: 100 piece, pointed needle metal t-pins 500 pcs, cd - dvd marker pen (black, blue, red, green), permanent marker pen (black, blue, red, green), pencil box, eraser box, sharpener box, a-4 size plastic folder (20 pieces set), legal size plastic folder (20 pieces set), plastic button folder (printed barti logo), board marker blue, black, red, green 10 pieces, board marker pen ink 15ml blue, black, red, green, highlighter yellow, red, green, whitener pen, whitener bottle 15 ml, kangaro 10/4 stapler, stapler-small hp 45, stapler lf23-624, fully automatic heavy duty all in one professional a3 laminator, stapler pins (small) no.10-1m, stapler pins 23/10-h 10mm box, stapler pins 23/13-h 13mm box, stapler pins 23/15 box, stapler pins 23/17-h heavy duty, stapler pin packet no-24/6 box, stapler pin packet no-24/8 box, stapler pin packet no-24/10 box, stapler pin packet no-24/12 box, stapler pin remover sr-100, stapler pin remover sr-200, stapler pin remover sr-300, punch machine dp-280, punch machine dp-500, punch machine dp-600, kangaro dp-800 punching machine, plastic scale 15 cms, plastic scale 30 cms, steel scale 30 cms, wooden scale, spiral binding white heavy quality plastic spiral ring/coil/loop manual ring binder (10mm, 15mm, 20mm, 25mm), scissors 8 inch (stainless steel), scissors 15 inch (stainless steel), paper knife mp-9 cutter (knife), paper knife mp-18 cutter (knife), casio mj-120d 150 steps check and correct desktop calculator, rubber band 2 inch (250 gram), rubber band 6 inch (250 gram), alkaline aa battery, alkaline aaa battery, u

CTN :44802894

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : supply of n1350 000215 deep search underwater metal detector , n1325 001306 installation kit bomb bomb suppression blanket , n1385 000028 tool kit fuze remover remote mechanical impact wrench , n1385 000029 fuse removal adaptor , n1377 000325 firing device explosive actuator improvised disruptor tool , n1385 000026 car remote opening tool , n1385 000027 tool kit fuze remover remote rocket wrench , n1385 000031 chemical detection kit , n1385 000032 tool kit explosive ordnance disposal non magnetic tool kit , n8405 004730 jacket 1 utility tool jacket for eod technician , n8465 002907 ballistic protection eyewear safety goggles , n8465 002905 field pack eod back pack , n8465 002904 snap link rappeller carabineer , n8470 000076 bomb disposal suit , n8470 000077 helmet explosive ordnance disposal bp helmets , n8415 002626 helmet safety , n6665 000627 detector explosive ordnance fibre optic survellance set , nsn6665 722251652 explosive detector explosive vapour detector ) /bid number : gem/2026/b/7348012 * /dated: 08-04-2026 & & / bid document 1 / 20

By Cities

By States

By Agencies

By Ownerships

By Sectors