Arms And Ammunation Equipment Tenders

Central Government And Public Sector

CTN :45418380

16 Jun, 2026 12.01 Lacs

Pune - Maharashtra

Tender For supply of material for the work of mw to conservation and repairs of the flooring, remains of the structures at shaniwarwada, dist-pune. as specified in the boq. - description of work, the sand should be and clean and free from dust, dirt and foreign matters. the dust of the sand should be less than as per the standard specification and sieved through 4.75 mm i.s sieve. the sand shall be brought from the river sand and uniform in the shape and well graded. the river sand consists of fine rounded grains. percentage deducted from volume of sand & not more than 5% of volume etc complete. as directed by work incharge., surkhi should be clean and free from dust, dirt and foreign matters. surkhi shall be made of well burnt bricks or brick bats (not over brunt) should be passes through 4.75mm sieve and retain on the 1mm sieve etc complete. etc. complete. as directed by work incharge., the lime shall be white fat lime and shall be freshly burnt and free from ashes and other foreign matters. the lime shall be screened through the sieve of 25mm. the remaining lime retain on the 25mm sieve rejected and not consider in the quantity etc. complete. as directed by work incharge. ( supplied as whenever required), supply of jiggery including of charges and stacking at work sire etc. complete. as directed by work incharge., supply of hirda including of charges and stacking at work sire etc. complete. as directed by work incharge., supply of gum including of charges and stacking at work sire etc. complete. as directed by work incharge., the brick jelly should be clean and free from dust, dirt and foreign matters. brick jelly shall be made of well burnt bricks or brick bats (not over burnt) should be as per i.s standard. etc complete. as directed by work incharge., water proof chemical etc complete. as directed by work incharge., the basalt stone size (600 x 450mm x width 300 to 550mm shall be hard, tough and durable of approved quarry as per the matching texture of the monument. the stones shall be chisel dressed on all sides to have perfectly square or rectangular faces so that they may be laid in perfectly horizontal and vertical joints. the stone and edges of face stones fine chisel hand dressed and rough surface etc. complete. etc complete. as directed by work incharge., supply of hard trap un-coursed rubble stone not less than 40 cm, stone obtained from approved quarry including supply site of work etc. complete. as directed by work incharge., supply of cement including of charges and stacking at work sire etc. complete. as directed by work incharge., hdpe pipe dia 90mm, hdpe 32mm pipe, gunney bag, adhisive chemical, provision for purchase of too and plants required for execution of work, pickaxe without handle, fawade spade without handle, pvc ghamela, halogen light 150 watt, wheeled barrow, bamboo of the 10 feet, wooden planks of size 6 x 8" x 1.5, coir string for construction work, sintex water tank 200 ltr, wooden ballies of 10 feet, hollow box, pointing tool trowel, pvc water tank 1000 liter, pvc pipe1", throwel (thapi), blade for cutting machine for stone of 4inch, right angle 24", wooden thapi (randa), level tube pipe of outer dia 10mm, hand gloves, helmet for construction site, safety shoes, safety belt, m.s. sheet tray 6 x 4, measuring tape 30mtr, measuring tape 5 mtr, spit level, gst 18% of sl.no.1 to 43

Central Government/Public Sector

CTN :45438014

04 Jul, 2026 NA

Ambala - Haryana

Tender For supply of manual rail gauge face lubricator machine specification: machine consists of 1)hand grease gun ( 6 kg capacity) 2) teflon wheel with axle bearing 3)crank wheel big & small (1 each)with 1/2 chain 4) grease application brush 5) square pipe with handle 6) weight of the machine ( 15-20 kg) 7) one no of stand [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45286161

10 Jun, 2026 38.83 Lacs

Bandipora - Jammu And Kashmir

Tender For corrigendum : upgradation of inner links of gundi qaiser bhat mohalla and buhroo mohalla by way of providing and laying of 75 mm thick wbm gii, 75 mm thick wmm, 50 mm thick bituminous macadam, 25 mm thick semidense and 6 mm thick seal coat.(machine mix laid wit

State Government

CTN :44216446

11 Jun, 2026 NA

Mahisagar - Gujarat

Tender For corrigendum : supply of miscellaneous and consumable items for mmd/ws at khep - v belt d-238, v belt a-28, v belt c-105, rubber spider for love joy coupling size l-095, ci love joy coupling size l-095, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, anabond unadrobic adhesive & sealand no-610, fevi kwik tube 3 grams, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets), belzona super metal, measure tape 5 meter, britelite 1200 meters long rang torch rechargeable led flashlight with charger, impact wrench power/battery operated, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, grease gun, bench vice size 4", bench vice size 8" (netco make), long nose plier, insulated with thick c.a. sleeve,generally confirming to is 3552-1989, product no:1430-6., circlip plier internal (bent nose),product no: 1442.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, combination plier ,185mm lenth, hand drill machine size 10mm, grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, mini angle grinder 100 mm, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36), ag-4 cutting wheel make:bosch, electrically operated portable cut off saw (for tube cutting), wheel size:355mm, arbour size: 25.4mm, scissors size: 10", wire brush with wooden handle size 50x150x300 mm, 3/4" polypropylene rope for normal mechanical work, manila rope, size: 16 mm dia, manila jute rope size 12 mm, ms nipple 1/2", nipple 3/4", nipple 1", ms nipple size 2", hss hacksaw blade size 300x12.5x0.63 mm, hss hacksaw blade size 12"x1/2"x24 tpi bipic, grits 150 emery cloth roll of 50mtr. length and 50mm width, emery paper smooth fine size 38 mm x 50 m length, portable welding machine, gas cutting torch cutogen esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, flash back arrestor for cutting torch end mounted oxygen, flash back arrestor for cutting torch end mounted da, flash back arrestor for regulator mounted da cylinder.

Central Government/Public Sector

CTN :45418862

24 Jun, 2026 NA

Goa - Goa

Tender For supply of awning equipment - stanchion (73.03 mm. o.d. x 5.16 μμ.τηκ.), stay (73.03 mm. o.d. x 5.16μμ.τηκ.), base plate for stanchion (210 x 100 x 12thk.), base plate for stay (150 x 100 x 12thk.), socket and plug, eye bolt for foot with stainless steel keep chain, cleat for awning tackles for stanchion, flush type eye plate (for detail refer annexure a), m.s. glav. 76.2 mm., sheave dia double block with becket & thimble suitable for 12 mm dia (38 mm.circ.) polyamide/polyamide rope and with swivel eye hook to suit ring of flush type eye plt., 12mm. dia polyamide rope, m.s. glav. 76.2 mm., sheave dia double block without becket & thimble suitable for 12 mm dia (38 μμ. circ.) circ.) polyamide/polyamide rope and with swivel eye hook to suit thimble of 12mm dia fswr., al. ferrule to suit, 12%%c rope, al. ferrule to suit, 10%%c rope, 12mm. dia f.s.w.r., covered with canvas., short link roller, shackle, thimble for 10 mm dia, f.s.w.r. (open type), bow shackle, thimble for 10 dia rope (open type), thimble for 12 dia rope (open type), shackle, slip with screw, awning canvas grey shade, side ridge rope, canvassed 10mm. dia gswr, 6x37 const, (bl=42kn), centre ridge rope, canvassed 12mm. dia gswr, 6x37 const, (bl=60kn), grommet size 32 (spur tooth), saffron & white terrycotton cloth for ceremonial awning, top fitting for stay, top plate for stanchion (100 dia x 10thk.), 15 thk. stanchion lug (det. drawing shown in sht 2.), stay lug on stanchion (110 x 60 x 15 thk.), m-24 bolt & nut 65 long, horizontal tube 73.03 mm.o.d. x5.16μμ.τηκ., flange for horizontal tube (90%%c x 6mm), horizontal tube lug (70lx50wx10thk.), awning stanchion lug (70lx50w×10thk.), support plate (90-80l x 50w x 10thk), m-16 bolt & nut 65 long, awning support tube 73.03 mm.o.d. x 5.16μμ.τηκ., vertical support tube 73.03 mm.o.d. x 5.16μμ.τηκ., end flange (single side) on support bearing, (73.03 ø x5 τηκ.), bracket for vertical support tube (150 x 100 x 5thk.), awning support tube lug (80 x 50 x 5thk), vertical support tube lug (95 x 50 x 5thk), m12 bolt & nut 35 long (for joining item no 42 and 43), support bearing for awning support tube (150 long x 10thk), bracket (70 x 70 x 5thk, doubler plate (120x200x5thk.), canvas cloth for guns/weapons/machinery on deck/superstructure, foldable umbrella, retractable shade for gangway, ceremonial lifebuoys with stand, canvas covers for each and every weather deck fitting and machinery openings

CTN :45419555

13 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For supply of toque wrench of repairing tool , clamp meter , piston ring set clamp , pliers gauge tools , 16 and 17 number socket , hydraulic pnuematic grease gun 15 kg , filter clamp chain , switch board 16 amp , wire 2.5 mm aluminum , bench drill machine with tools , metal punch set , hand drill machine bty chg 24 v , dril pin set

CTN :45408454

12 Jun, 2026 NA

Ahmednagar - Maharashtra

Tender For supply of wooden target 8x8 , wooden target 4x4 , wooden target 1x1 , combat targer figure 11 , combat target figure 12 , target paper figure 11 , target paper figure 12 , target paper 1x1 , mmg zerogin target paper , hessian cloth for targer paper , repair patch book , white cloth for targer paper screen size 4x4 , red cloth for target screen size 8x8 , sand bag , brush hard iron wired , soft brush , small lithium battery 1.5v , lime stone powder

CTN :45433539

19 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of bamboo poles for range classification , jute rope for cpt , figure 11 target paper for night firing , figure 12 target paper for day firing , sand bags for lmg sentry post , borosil glass , a4 paper size

CTN :45408233

12 Jun, 2026 25.63 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of tiles anti skid 300x300mm , tiles anti skid 600x600mm , quick setting compound rapidite , water proofing compound , pbs roll self finished tarfelt grade size 1.00 mtr , acrylic sheet 4 ft x3 ft x3mm , acrylic sheet 6 ft x4 ft x4mm , wall putty , synthetic enamel paint colour black , synthetic enamel paint colour white , synthetic enamel paint colour og , synthetic enamel paint colour red , synthetic enamel paint colour blue , synthetic enamel paint fie redrent , synthetic enamel paint red oxide , paint brush 2 inch , paint brush 4 inch , white cement , cutting plier insulated 6 inch taparia , gi pipe 40 mm dia 6 mtr long medium grade , gi pipe 20mm dia 3 mtr long , pvc pipe 3 m long 4 inch dia , upvc pipe 15mm dia single socketed 3 mtr long , 110mm dia upvc swr pipe single socketed , pvc elbow 4 inch dia , gi union 15mm , ppr pipe 20 6m long , ppr union 20mm , pvc socket reducer 20 25mm , gi elbow reducer 20 15mm , gi elbow reducer 20 25mm , gi elbow 20mm , ppr elbow reducer 20 25mm , 4 inch dia upvc bend , 110mm dia elbow , 110mm dia pvc pipe l bend , pvc socket 110 mm , gi union 20mm , gi union 25mm , gi tee reducer 20 15mm , gi socket reducer 20 25mm , gi socket 15mm , gi socket 20mm , gi socket 25mm , gi reducer socket 40 x20mm isi marked , gi nipple 15mm 2 inch long , gi nipple 15mm 3 inch long , gi nipple 15mm 4 inch long , pvc connection pipe 110mm 3 mtr long , towel ring , toilet paper holder , water storage tank double layer 200 ltr capacity , water storage tank double layer 500 ltr capacity , water storage tank double layer 1000 ltr capacity , ppr tank connector 20mm with check nut and washer , cp bib cock 15mm , cp bib cock 20mm , brass bib cock 15mm , brass bib cock 20mm , ptmt bib cock 20 mm , ptmt piller cock 15 mm , cp pillar cock 15mm , brass stop cock 20mm , cp stop cock 15mm , cp stop cock 20mm , pvc stop cock 15mm , m seal 20 gms , ball brass float valve 15mm , brass stop cock 15mm , vitreous china wash hand basin , vitreous china urinal pot , nahani trap with jali 110x 110mm , snow white colour european wc size 650x405x770m , pvc valve less syphonic action type low level flushing cistern 10 ltr capacity , vitreous china wash hand basink size 550x400 mm , gun metal gate valve 15 mm , soap dish , ppr wall clamp dia 32 mm , cgi sheet 810 x3050 mm 0.63mm thick , cgi sheet 810 x 3650 mm 0.63mm thick , cgi sheet 810 x1800 mm 0.63mm thick , cgi sheet 810 x 2400 mm 0.63mm thick , weld mesh panels , punched tape concertina coil 850 mm dia 18 loops 3.5 mm core wire. , ppgi sheet 12 ft long , nylone rope 20 mm dia , iron cutting machine blades , 12 mm thick plywood bwr of size 8 feet x 4 feet , 6 mm thick plywood bwr of size 6 feet x 4 feet , prefabricated get earthing electrode of pipe in pipe tehnology , back fill compound , lightning terminal copper with five nos prong 15 cm long , looking mirror 600mm x 450mm , fire extinguisher 2 kg , fire extinguisher 1 kg , nails 1 inch , hdpe laminated sand bag of size 75 x 40 cm , hinges 6 inch , self tapping screw 2 inch , welding rod , extension coord heavy duty , tarpaulin 30 ft x 30 ft

CTN :45420337

13 Jun, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of training rope , fig 11 iron sheet , bamboo for fixing of target , fig 11 target paper , nra target paper , nra target wooden frame , camo net pole , bamboo

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector