Bus Bar Tenders

State Government

CTN :43182033

31 Dec, 2025 NA

Alappuzha - Kerala

Tender For preparing drawing, and supplying necessary copper busbar for interconnecting existing panels of incomer, buscoupler, busriser new outgoing feeder set and bus of outgoing feeder panel of existing 10 panel set.

CTN :42988395

18 Dec, 2025 1.00 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : maintenance- repairs- replacement of electrical items for various projects executed under srinagar smart city limited for a period of 2 years. - supply, installation, testing, commissioning including loading, transportation, insurance, unloading, carriage, delivery and erection of following sizes of distribution transformer at site., i) 630 kva distribution transformer, ii) 400 kva distribution transformer, iii) 250 kva distribution transformer, iv) 100 kva distribution transformer, v) 63 kva distribution transformer, fixing of fabricated gi angle/channel/flat/pole collars., fixing of galvanised nuts and bolts., supply, installation, testing, commissioning, insurance, unloading, carriage and delivery at site, laying, stringing and binding of conductor including joints with pg clamps of required following size of acsr conductor (0.1 /0.05/ 0.03), i) 100 sqmm acsr (dog), ii) 50 sqmm acsr (rabbit), iii) 30 sqmm acsr (weasel), supply, installation, testing, commissioning of ab (ht) cable of following sizes:, iii) 50 mm ab (ht) cable (3x50+1x70 mm ) xlpe(11 kv, 3c +earth), iv) 70 mm ab (ht) cable (3x70+1x95 mm ) xlpe(11 kv, 3c +earth), v) 95 mm ab (ht) cable (3x95+1x95 mm ) xlpe(11 kv, 3c +earth), vi) 120 mm ab (ht) cable (3x120+1x95 mm ) xlpe(11 kv, 3c +earth), mid span straight through jointing kit for 11 kv abc of following sizes:, i) 11 kv abc 50-95mm straight through jointing kit (3 core), ii) 11 kv abc 120-185mm straight through jointing kit (3 core), iii) 11 kv abc 240-300mm straight through jointing kit (3 core), heat shrinkable outdoor cable termination kit for ht/lt abc of following sizes:, i) 11 kv abc 70-95 mm outdoor cable termination kit, ii) 11 kv abc 120 mm outdoor cable termination kit, iii) 11 kv abc 150-185 mm outdoor cable termination kit, iv) 11 kv abc 240-300 mm outdoor cable termination kit, supply, installation, testing, commissioning of ab (lt) cable of following sizes:, ii) 50 mm ab (lt) cable ( 3x50 + 1 x 16 + 1 x 35) mm xlpe (1.1kv, 3+1 c, al), iii) 70 mm ab (lt) cable (3 x 70 + 1 x 16 + 1 x 50) mm xlpe (1.1kv, 3+1 c, al), iv) 120 mm ab (lt) cable (3 x 120 + 1 x 25 + 1 x 95) mm xlpe (1.1kv, 3+1 c, al), straight through cable jointing kit for lt abc of following sizes:, ii) 50 mm ab (lt)straight through cable jointing kit, iii) 70 mm ab (lt)straight through cable jointing kit, iii) 120 mm ab (lt)straight through cable jointing kit, dismantling, i) dismantling, stacking of 9/8 mtr st poles and transportation back to divisional store as per the instruction of electrical incharge., ii) dismantling of 0.03/0.05/0.1 acsr conductor and transportation to divisional stores (servicible), servo voltage stabilizer, i) supply, installation, testing, commissioning including loading, transportation, insurance, unloading, carriage and delivery at site and erection of 63 kva, 3-phase oil cooled servo (complete job), ii) supply, installation, testing, commissioning including loading, transportation, insurance, unloading, carriage and delivery at site and erection of 50 kva, 3-phase oil cooled servo (complete job), rmu, supply, installation, testing, commissioning including loading, transportation, insurance, unloading, carriage and delivery at site and erection of 4 way type,two isolators and two circuit breakers 11 kv, ring main unit ,sf6 insulated, out-door type, extensible type,breaking capacity 25 ka for one second with sf6 circuit breaker / vcb self powered with o/c + e/f relay comprising of a) 11kv 630 amp motorised isolator including earthing switches with making capacity 52ka, having mechanical on/off, earth indications with fault current indicator.b) 11kv ,400 amp motorised spring operated, circuit breakers with earthing switches, connecting the rmu to supply transformer. c). copper bus bar of 630 amp rating.d). 1 no numerical aux. powered relay having non directional o/c and e/f protection (for each ciruit breaker).d). the circuit breaker enclosures shall be outfitted with a communicable-type numer

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43139480

25 Dec, 2025 NA

Khammam-T - Telangana

Tender For supply of heat shrinkable pvc sleeve for high voltage busbars and connections(bhel) (q3)

Central Government/Public Sector

CTN :43166158

02 Jan, 2026 42.00 Lacs

Jamnagar - Gujarat

Tender For special repair replacement of lt panel, bus bar and cables in domestic area at af stn jamnagar under ge (af) jamnagar no 1

Central Government/Public Sector

CTN :42864840

19 Dec, 2025 1.24 Lacs

Korba - Chhattisgarh

Tender For corrigendum : supply of procurement of spares for prabhu make 3300 v nflp dol starter d d - copper busbar 400 amps set of 3 with part no ht101 or equivalent , resin cast moulded ct for o-l relay 100 with part no ht600 or equivalent , resin cast moulded ct for ammeter 150-5 with part no ht650 or equivalent , intrinsically safe pilot panel complete with part no ht3000 or equivalent , pilot relay with part no ht2200 or equivalent , ammeter - analog (panel meter) as per is 1248 (q3) , voltmeter - analog (panel meter) as per is 1248 (q3)

Central Government/Public Sector

CTN :43141401

22 Dec, 2025 37.24 Lacs

Koriya - Chhattisgarh

Tender For supply of spare for lhd 811 c c - hydraulic pump 811b050000101 , filter assy eea0005879 , suction strainer 625b050000122 , drive line rear 811b050000130 , clutch outer disc eea0005788 , clutch inner disc eea0005787eea0005787 , clutch inner disc eea0005829 , roller 811a050000104 , roller 811a050000103 , cable reel valve assy 250c050000011 , relief valve eea0009580 , spider assy 811m100000417 , throttle cable assly 811b050000123 , pillow block bearing 811a050000143 , transmission cable assembly 811b050000122 , axle bolt 912a060000171 , brake disc eea0015464 , brake disc eea0015470 , intermediate back disc eea0021744 , brake disc eea0021745 , nut eea0015492 , back up ring eea0021738 , filter element eea0003479 , pressure reducing valve 611a050000004 , sprocket 811b060000149 , sprocket 811b060000150 , axle bolt 912a060000170 , back up ring eea0015472 , back up ring 12wla189654a , o ring 12wla189653a , relief cartridge eea0008997 , intermidiate brake disc eea0021749 , priority valve 625a000003070 , twin cooler assembly 811c050000102 , kit drive plate eea0010872 , clutch piston assy eea0010879 , clutch piston assy eea0010878 , seal eea0015404 , o ring eea0015473 , o ring eea0015477 , o ring eea0015479 , accumulator 1 ltr 811a050000192 , seal kit eea0020978 , seal kit eea0020994 , seal kit eea0020991 , seal kit eea0019110 , o ring eea0015441 , o ring eea0015389 , drive shaft m 811b060000174 , clutch piston assembly eea0010880 , relief valve assy 625b050000064 , bush 625a000003260 , bush mbh 150 170 140a , flight bar and link assembly 811b070000456

Central Government/Public Sector

CTN :42995477

19 Dec, 2025 32.09 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : procurement of spares required for ht panel and ht dol starter c c > f> f - on-off earth isolator 400a 3 pole , vacuum contactor savac-4 400a 6. 6kv , vacuum interrupter 6. 6kv 400a , closing coil vacuum contactor 220v , 3 phase 3 limb drawout potential transformer , control circuit breaker 6a 2p 10ka , current transformer 50 5a 15va c1 cl1 c2 , motor protection relay m-pro-100 220v , earth leakage relay elm-8 220v , on delay timer 10a 1no 1nc , current transformer 150 5a 15va c1 cl1 , current transformer 600 5a 15va c1 cl1 , vcb spout 6. 6kv grade 40x12 , dc motor for spring charging 220v dc , finger contact for vcb copper , closing coil for vcb 220v dc , tripping coil for vcb 220v dc , lockout relay clr 220v dc , 3oc 1ef relay iri-pro 220v dc , trip circuit supervision relay mra 220v dc , impulse counter 220v dc , phoenix connector for control wiring , vacuum circuit breaker 630a tp 20ka , busbar support ) /bid number: gem/2025/b/6950130 * /dated: 01-12-2025 & & / bid document1 / 22

Central Government/Public Sector

CTN :43164377

22 Dec, 2025 NA

Sundergarh - Odisha

Tender For providing of custom bid for services - replacement of obc busbar systems for crane 130

State Government

CTN :42952579

16 Dec, 2025 13.00 Lacs

Bellary - Karnataka

Tender For corrigendum : procurement of transformer spares - ody_silica gel breather-1/2 kg cap, ody_245kv iv bushing 1250a, ody_aircel for 25mva ut unit 1, ody_aircel for 25mva ut unit 2, ody_breather container 15kgx1 nos, ody_breather container 10kg x1 nos, ody_aircell for 207mva gt, ody_ silica gel breather 4 to 5 kg, ody_36 kv neutral busbar supp insu

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government