M R I Tenders

CTN :42298598

24 Oct, 2025 NA

Mumbai - Maharashtra

Tender For providing of custom bid for services - custom bid for services - valce salvaging job; f work covers salvaging of defective sc valves and restoring them for reuse as per standard procedures and instructions of the officer-in-charge. the contractor shall carry out the following activities in a safe, systematic, and accountable manner: 1. salvaging operations salvaging of defective sc valves shall be carried out as per laid-down procedures using the valve test bench and/or any other equipment or method advised by the officer-incharge. the contractor shall collect defective sc valves from the store after obtaining necessary approvals. 2. cleaning & preparation clean all defective sc valves in the ultrasonic valve cleaning machine and/or other approved valve cleaning systems. ensure all valves are thoroughly cleaned to remove dirt, oil, or contaminants before testing. segregate cleaned valves properly for further inspection and testing. 3. segregation & testing segregate valves based on their source (e.g. hot repair, defective, pin leak, scrapable cylinders, etc.). perform low pressure and high pressure testing of the valves as per laid-down procedures and test parameters. identify valves that are fit for reuse and those that are defective/rejects. 4. salvaging & assembly replace the old o -ring washer of all good salvaged valves with new o -ring washers (to be provided by hpcl). fit safety caps and back covers on the salvaged valves to protect them from dust and contamination. ensure salvaged valves are clean, properly assembled, and ready for storage. 5. storage & documentation arrange salvaged valves type-wise in a countable and organized manner and deposit them in the stores. ensure proper handling to avoid damage or mixing of valve categories. maintain shift-wise records of: o number of valves received, o number of valves cleaned, tested and salvaged, o number of valves rejected. 6. manpower & productivity contractor shall provide minimum one manpower per shift. a minimum target of 400 sc valves shall be salvaged per manpower per shift. inventory of defective valves pending salvaging shall not exceed one day s generation. 7. materials & consumables hpcl shall provide o -ring washers, safety caps, back covers, and other reusable fittings. kerosene and other cleaning consumables shall be supplied by the vendor. contractor shall ensure availability of all tools and accessories required for smooth execution. 8. certification & payment the shift officer shall certify the salvaged quantity at the end of each shift. payment shall be made strictly on actual quantity salvaged and accepted by hpcl. any deviation or failure to meet daily targets may attract penalty as per tender terms. 9. safety & compliance all activities shall be carried out in compliance with hpcl safety norms and oisd guidelines. personnel shall wear required ppe (gloves, goggles, shoes, helmet) during operations. all salvaging and testing activities shall be conducted under the supervision of hpcl personnel.

CTN :42305454

27 Oct, 2025 12.09 Lacs

Pune - Maharashtra

Tender For providing of scanning and digitisation service (version 2) - 300; a3, a4, mri, legal, x-ray, ecp report

CTN :42239533

25 Sep, 2025 NA

Bettiah - Bihar

Tender For the bihar medical services and infrastructure corporation limited, patna invites e-bids from interested service provider for installation, operation and maintenance of mri machine under public private partnership (ppp) mode for government medical college & hospital, bettiah of bihar.

Corporations And Associations And Others

CTN :40911093

24 Oct, 2025 86.00 Crore

Panchkula - Haryana

Tender For corrigendum : request for proposal for development, operation and maintenance of radiology imaging diagnostic centers for ct and mri scan services in selected civil hospitals of haryana on public private partnership basis

CTN :41463426

27 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply, installation, testing and commissioning and operation and maintenance of mri scan and ct scan facility centers as civic health collaboration model for the period 10 years with provision of two extension for another 10 years each that is total 30 years at four peripheral hospitals under jurisdiction of chief medical superintendent and head of department (secondary healthcare services), mumbai tender id: 2025_mcgm_1205464.

State Government

CTN :41524390

18 Nov, 2025 3.70 Crore

Jaipur - Rajasthan

Tender For corrigendum : technical specification point wise dbs implant & accessories - dbs rechargeable with directional lead with25yr battery life & image guided programming integrated inside clinician programmer with micc multiple independent current control technology with zero volt technology,bluetooth connectivity with clinician and patient programmers, usfda & ce approved kit contents: rechargeable pulse generator-1 , directional lead kit -2 , extension kit -2 , burr hole locking kit -2 , tunneling tool -1 , patient remote control kit -1, patient charging kit -1 , dbs rechargeable with non directional lead with 25yr battery life & image guided programming integrated inside clinician programmer micc multiple independent current control technology with zero volt technology,bluetooth connectivity with clinician and patient programmers. have 8 contact non-directional lead kit with array span of 15.5mm for maximum coverage, usfda & ce approved kit contents:rechargeable pulse generator -1, non-directional lead kit -2, extension kit -2, burr hole locking kit -2, tunneling tool -1, patient remote control kit -1, patient charging kit -1, dbs non rechargeable with directional lead with image guided programming integrated inside clinician programmer micc multiple independent current control technology &bluetooth connectivity with clinician and patient programmers,usfda & ce approved kit contents: non-rechargeable pulse generator -1 , directional lead kit -2 , extension kit -2, burr hole locking kit -2 , tunneling tool -1 , patient remote control kit -1,), dbs non rechargeable with non-directional lead with image guided programming integrated inside clinician programmermicc multiple independent current control technology withbluetooth connectivity with clinician and patient programmers. should have 8 contact non-directional lead kit with array span of 15.5mm for maximum coverage,usfda & ce approved kit contents: non-rechargeable pulse generator -1, non-directional lead 1), dbs implant kit with non-rechargeable, 3t mri compatible and sensing enabled ipg and directional leads.the implanted pulse generator (dbs neurostimulator- ipg) should have a minimum service life of 5-7 years and there should not be a need to recharge it periodically.ipg should have the capability for group programming and ability to store the programming data in ipg itself and retrieve from ipg.the system should be able to sense local field potentials (lfps) from brain targets and this data should be accessible through the physician programmer. the leads should be able to stimulate in specific directions, in addition to the ability to stimulate circumferentially. markers on leads should facilitate directional programming even if lead rotates. the leads should also be able to sense lfps.burrhole kit should be there for securing lead in place. microelectrodes for intra op stimulation and recording should be there.the extension connecting the lead and ipg should be flexiblethere should be a tunneller to place the extension wire and the tunneller should be metallic and firm to enable smooth tunnelling.the system should have approval for conditional full-body 1.5t & 3t mri compatibility.patient programmer, enabling the patient to see and if needed, modify the stimulation under guidance, should be available. patients should be able to mark dyskinesia, tremor etc. using the programmer., dbs implant kit with rechargeable, 1.5t & 3t mri compatible and sensing enabled ipg and directional leads.the implantable pulse generator (dbs neurostimulator- ipg) should have a service life of 15+ years if regularly recharged by the patient at specified intervals.ipg should have the capability for group programming and ability to store the programming data in ipg itself and retrieve from ipg.the system should be able to sense local field potentials (lfps) from brain targets and this data should be accessible through the physician programmer. the system shou

CTN :42247314

01 Nov, 2025 91.12 Lacs

Lucknow - Uttar Pradesh

Tender For supply of 0point5percent chlorhexidine acetate tulle grass dressing , cobra 2 visceral braided torque control catheter 5point5 fr , flow guided microcatheter for super selective catheterisat , soft braided guiding catheter for atraumatic negotiations o , soft braided guiding catheter for atraumatic negotiations , embolization coils 0point018inch 2 6 mm diameter and 20 , embolization coils 0point035inch 2 6 mm diameter and , balloon mounted stent 6 7 8 mm diamter x 38 mm or mo , polyvinyl alcohol particles 150 250 microns , polyvinyl alcohol particles 250 350 microns , polyvinyl alcohol particles 500 700 microns , needle spinal 23g at least 9 cm length , needle spinal 24g at least 9 cm length , sheath guiding vascular access braided construction , microcatheter braided steam shapeable tip suitable f , guidewire lunderquist extra stiff 0point035 inch diam , microguidewire steel construction hydrophilic coatin , pushable fibered platinum coils mr compatible 0poin , oil based iodinated contrast lipiodol , y connector with double rotating adapter and touhy bo , compliant occlussion balloon catheter permitting 0poi , black braided silk size 0 alloy needle 1 2 circle round b , marker pigtail catheter , ultrasound probe cover , biliary self expanding metallic stents size 10 mm x 10 cm , biliary self expanding metallic stents size 10 mm x 8 cm , renal guide catheter assorted sizes , neuro micro guidewire made of proximal stainless stee , ot table cover size 100cmsx 225 cmspoint made of bios , percutaneous access set biliary with 21 or 22 g needle , soft tip intracranial 6f guiding catheter for distal smoot , transjuglar intrahepatic porto systemic shunt tipss set , vascular plug assorted sizes with all accessories ce fd , 0point014 neuro microguide wire with microfabricated , 0point014inch neuromicroguide wire with hybrid nitin , balloon mounted covered stents 5 12 mm of assorted l , disposable non woven towel 30x30 cm 70 gm pack of , torquable hydrophilic microcatheter set of 2point4 2po , glidecath angiography cathetar vertebral 4f 100 cm leng , glidecath angiography catheter vertebral 5f 100 cm lent , fog free 3 ply surgeons face mask with foam strip for co , micropuncture set 5f , knife bard parker blade size 1 fitting commercial nopo , disposable c arm cover , hydrophilic angiography catheter multipurpose 4 fr , catheter diagnostic angiography single endhole picar , catheter diagnostic angiography single endhole mult , guidewire amplatz ultra stiff 0point035 inch diameter , guidewire nitinol construction hydrophilic coating a 0point5percent chlorhexidine acetate tulle grass dressing, cobra 2 visceral braided torque control catheter 5point5 french 65 cms long, cobra 2 visceral braided torque control catheter 5point5 french 65 cms l, flow guided microcatheter for super selective catheterisation of proximal , flow guided microcatheter for super selective catheterisation of proximal , soft braided guiding catheter for atraumatic negotiations of tortuous , soft braided guiding catheter for atraumatic negotiations of tortuous , embolization coils 0point018inch 2 6 mm diameter and 20 60mm length, embolization coils 0point018inch 2 6 mm diameter and 20 60mm length, embolization coils 0point035inch 2 6 mm diameter and 2 6 cm length, embolization coils 0point035inch 2 6 mm diameter and 2 6 cm length, balloon mounted stent 6 7 8 mm diamter x 38 mm or more length, balloon mounted stent 6 7 8 mm //bid details 2 / 68

CTN :42249872

10 Nov, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of medical equipments cims c c - abg machine , arterial abg , b scan , cyclocryotherapy machine , df with pacing , digital spirometer , digital video colposcope , ecg machine , eeg machine , electrocautery machine , ent operating microscope , equipment for cardiac pacing , fiber optic bronchoscope , harmonic scalpel ace , hysteroscopy simulator , li analyzer , ligasure bipolar generator , loup with led light , multiple syringe infusion , ot light , radiant warmer , suction machine electric , syringe infusion pump , ultrasonography with dopper , usg machine with echo , ventilator , volumetric infusion pump , wet field bipolar cautery , anaesthesia workstation (v2) (q2) , high end multipara monitor (v2) (q2)

CTN :42214930

17 Sep, 2025 NA

Patna - Bihar

Tender For the bihar medical services and infrastructure corporation limited, patna invites e-bids from interested service provider for installation, operation and maintenance of 128 slice ct scan and 3t mri machine under public private partnership (ppp) mode at nalanda medical college & hospital, (nmch) patna of bihar.

State Government

CTN :42163385

06 Nov, 2025 81.00 Crore

Bengaluru - Karnataka

Tender For tender for supply and installation of mri machines in district hospitals on an in-house model under the ecrp-2/nhm-nfds grant under the national health mission free diagnostic services programme

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

State Government

State Government